Significance and Use
4.1 These test methods for the chemical analysis of metals and alloys are primarily intended to test such materials for compliance with compositional specifications. It is assumed that all who use these test methods will be trained analysts, capable of performing common laboratory procedures skillfully and safely. It is expected that work will be performed in a properly equipped laboratory.
Scope
1.1 These test methods cover the determination of carbon, sulfur, nitrogen, and oxygen, in steel, iron, nickel, and cobalt alloys having chemical compositions within the following limits:
Element
Mass Fraction Range, %
Aluminum
0.001 to 18.00
Antimony
0.002 to 0.03
Arsenic
0.0005 to 0.10
Beryllium
0.001 to 0.05
Bismuth
0.001 to 0.50
Boron
0.0005 to 1.00
Cadmium
0.001 to 0.005
Calcium
0.001 to 0.05
Carbon
0.001 to 4.50
Cerium
0.005 to 0.05
Chromium
0.005 to 35.00
Cobalt
0.01 to 75.0
Niobium
0.002 to 6.00
Copper
0.005 to 10.00
Hydrogen
0.0001 to 0.0030
Iron
0.01 to 100.0
Lead
0.001 to 0.50
Magnesium
0.001 to 0.05
Manganese
0.01 to 20.0
Molybdenum
0.002 to 30.00
Nickel
0.005 to 84.00
Nitrogen
0.0005 to 0.50
Oxygen
0.0005 to 0.03
Phosphorus
0.001 to 0.90
Selenium
0.001 to 0.50
Silicon
0.001 to 6.00
Sulfur
0.002 to 0.35
Tantalum
0.001 to 10.00
Tellurium
0.001 to 0.35
Tin
0.002 to 0.35
Titanium
0.002 to 5.00
Tungsten
0.005 to 21.00
Vanadium
0.005 to 5.50
Zinc
0.005 to 0.20
Zirconium
0.005 to 2.500
1.2 The test methods appear in the following order:
Sections
Carbon, Total, by the Combustion and Infrared Absorption or Thermal Conductivity Detection Test Method
10 – 20
Nitrogen by the Inert Gas Fusion and Thermal Conductivity Detection Test Method
32 – 42
Oxygen by the Inert Gas Fusion and Infrared Absorption or Thermal Conductivity Detection Test Method
43 – 54
Sulfur by the Combustion-Infrared Absorption Detection Test Method
55 – 65
Sulfur by the Combustion–Infrared Absorption Test Method (Potassium Sulfate Calibration) – Discontinued 2018
21 – 31
1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard.
1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific hazards statements are given in Section 6.
1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.