List of ISO Standards

• IEC 31010 – Risk management — Risk assessment techniques
• IEC 60601-1-10 – Medical electrical equipment — Part 1-10: General requirements for basic safety and essential performance — Collateral standard: Requirements for the development of physiologic closed-loop controllers — Amendment 2
• IEC 60086-3 – Primary batteries — Part 3: Watch batteries
• IEC 559 – Binary floating-point arithmetic for microprocessor systems
• IEC 60601-1-8 – Medical electrical equipment — Part 1-8: General requirements for basic safety and essential performance — Collateral standard: General requirements, tests and guidance for alarm systems in medical electrical equipment and medical electrical systems — Amendment 2
• IEC 60601-1-12 – Medical Electrical Equipment — Part 1-12: General requirements for basic safety and essential performance – Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the emergency medical services environment — Amendment 1
• IEC 60601-1-11 – Medical electrical equipment — Part 1-11: General requirements for basic safety and essential performance — Collateral standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment — Amendment 1
• IEC 60601-2-31 – Medical electrical equipment — Part 2-31: Particular requirements for the basic safety and essential performance of external cardiac pacemakers with internal power source
• IEC 60601-2-13 – Medical electrical equipment — Part 2-13: Particular requirements for the safety and essential performance of anaesthetic systems — Amendment 1
• IEC 60601-2-12 – Medical electrical equipment — Part 2-12: Particular requirements for the safety of lung ventilators — Critical care ventilators
• IEC 60695-11-10 – Fire hazard testing — Part 11-10: Test flames — 50 W horizontal and vertical flame test methods — Amendment 1
• IEC 60601-2-52 – Medical electrical equipment — Part 2-52: Particular requirements for the basic safety and essential performance of medical beds — Technical Corrigendum 1
• IEC 60695-11-20 – Fire hazard testing — Part 11-20: Test flames — 500 W flame test methods — Amendment 1
• IEC 60796-3 – Microprocessor system BUS I, 8-bit and 16-bit data (MULTIBUS I) — Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
• IEC 60796-2 – Microprocessor system bus — 8-bit and 16-bit data (MULTIBUS I) — Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct)
• IEC 60796-1 – Microprocessor system bus — 8-bit and 16-bit data (MULTIBUS I) — Part 1: Functional description with electrical and timing specifications
• IEC 60823 – Microprocessor system bus (VMSbus) — Serial sub-system bus of the IEC 821 Bus (VMEbus)
• IEC 60822 – Parallel Sub-system Bus of the IEC 821 VME bus
• IEC 60821 – VMEbus — Microprocessor system bus for 1 byte to 4 byte data — Amendment 1
• IEC 60974-1 – Arc welding equipment — — Part 1: Welding power sources
• IEC 60948 – Numeric keyboard for home electronic systems (HES)
• IEC 60824 – Terminology related to microprocessors
• IEC 61966-2-1/Amd 1 – Multimedia systems and equipment — Colour measurement and management — Part 2-1: Colour management — Default RGB colour space — sRGB — Amendment 1
• IEC 61400-4 – Wind turbines — Part 4: Design requirements for wind turbine gearboxes
• IEC 61340-4-4 – Electrostatics — Part 4-4: Standard test methods for specific applications – Electrostatic classification of flexible intermediate bulk containers (FIBC)
• IEC 62264-1 – Enterprise-control system integration — Part 1: Models and terminology
• IEC 62065 – Maritime navigation and radiocommunication equipment and systems — Track control systems — Operational and performance requirements, methods of testing and required test results
• IEC 61966-2-2 – Multimedia systems and equipment — Colour measurement and management — Part 2-2: Colour management — Extended RGB colour space — scRGB
• IEC 62366-1 – Medical devices — Part 1: Application of usability engineering to medical devices — Technical Corrigendum 1
• IEC 62366 – Medical devices — Application of usability engineering to medical devices — Amendment 1
• IEC 62304 – Medical device software — Software life cycle processes — Amendment 1
• IEC 62990-1 – Workplace Atmospheres — Part 1: Gas detectors — Performance requirements of detectors for toxic gases — Technical Corrigendum 1
• IEC 62752 – In-Cable Control and Protection Device for mode 2 charging of electric road vehicles (IC-CPD) — Amendment 1
• IEC 62430 – Environmentally conscious design (ECD) — Principles, requirements and guidance
• IEC 796-2 – Microprocessor system bus — 8-bit and 16-bit data (MULTIBUS I) — Part 2: Mechanical and pin descriptions for the system bus configuration, with edge connectors (direct)
• IEC 796-1 – Microprocessor system bus — 8-bit and 16-bit data (MULTIBUS I) — Part 1: Functional description with electrical and timing specifications
• IEC 62990-2 – Workplace atmospheres — Part 2: Gas detectors — Selection, installation, use and maintenance of detectors for toxic gases and vapours
• IEC 80000-14 – Quantities and units — Part 14: Telebiometrics related to human physiology
• IEC 80000-13 – Quantities and units — Part 13: Information science and technology
• IEC 796-3 – Microprocessor system BUS I, 8-bit and 16-bit data (MULTIBUS I) — Part 3: Mechanical and pin descriptions for the Eurocard configuration with pin and socket (indirect) connectors
• IEC 80369-5 – Small-bore connectors for liquids and gases in healthcare applications — Part 5: Connectors for limb cuff inflation applications — Technical Corrigendum 2
• IEC 80001-1 – Application of risk management for IT-networks incorporating medical devices — Part 1: Safety, effectiveness and security in the implementation and use of connected medical devices or connected health software
• IEC 80000-6 – Quantities and units — Part 6: Electromagnetism
• IEC 80416-1 – Basic principles for graphical symbols for use on equipment — Part 1: Creation of graphical symbols for registration
• IEC 80601-2-26 – Medical electrical equipment — Part 2-26: Particular requirements for the basic safety and essential performance of electroencephalographs — Amendment 1
• IEC 80416-3 – Basic principles for graphical symbols for use on equipment — Part 3: Guidelines for the application of graphical symbols — Amendment 1
• IEC 80601-2-49 – Medical electrical equipment — Part 2-49: Particular requirements for the basic safety and essential performance of multifunction patient monitoring equipment — Amendment 1
• IEC 80601-2-35 – Medical electrical equipment — Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads or mattresses and intended for heating in medical use — Technical Corrigendum 2
• IEC 80601-2-30 – Medical electrical equipment — Part 2-30: Particular requirements for basic safety and essential performance of automated non-invasive sphygmomanometers
• IEC 80601-2-60 – Medical electrical equipment — Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment
• IEC 80601-2-59 – Medical electrical equipment — Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening — Amendment 1
• IEC 80601-2-58 – Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery — Amendment 1: Proposed Horizontal Standard
• IEC 80601-2-78 – Medical electrical equipment — Part 2-78: Particular requirements for basic safety and essential performance of medical robots for rehabilitation, assessment, compensation or alleviation — Amendment 1
• IEC 80601-2-77 – Medical electrical equipment — Part 2-77: Particular requirements for the basic safety and essential performance of robotically assisted surgical equipment — Amendment 1
• IEC 80601-2-71 – Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment
• IEC 81346-2 – Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 2: Classification of objects and codes for classes
• IEC 81346-1 – Industrial systems, installations and equipment and industrial products — Structuring principles and reference designations — Part 1: Basic rules
• IEC 81001-5-1 – Health software and health IT systems safety, effectiveness and security — Part 5-1: Security — Activities in the product life cycle
• IEC 81714-3 – Design of graphical symbols for use in the technical documentation of products — Part 3: Classification of connect nodes, networks and their encoding
• IEC 81714-2 – Design of graphical symbols for use in the technical documentation of products — Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference library, and requirements for their interchange
• IEC 82045-1 – Document management — Part 1: Principles and methods
• IEC 822 – Parallel Sub-system Bus of the IEC 821 VME bus
• IEC 821 – IEC 821 VMEbus — Microprocessor system bus for 1 byte to 4 byte data
• IEC 82045-2 – Document management — Part 2: Metadata elements and information reference model — Technical Corrigendum 1
• IEC 824 – Terminology related to microprocessors
• IEC 82304-1 – Health software — Part 1: General requirements for product safety
• IEC 823 – Microprocessor system bus (VMSbus) — Serial sub-system bus of the IEC 821 Bus (VMEbus)
• IEC 948 – Numeric keyboard for home electronic systems (HES)
• IEC 88528-11 – Reciprocating internal combustion engine driven alternating current generating sets — Part 11: Rotary uninterruptible power systems — Performance requirements and test methods
• IEC 847 – Characteristics of local area networks (LAN)
• IEC/CD 62565-3-1 – Nanomanufacturing — Material specifications — Part 3-1: Graphene — Blank detail specification
• IEC/CD 61400-4 – Wind turbines — Part 4: Design requirements for wind turbine gearboxes
• IEC 975 – Microprocessor universal format for object modules
• IEC/CD 80601-2-71 – Medical electrical equipment — Part 2-71: Particular requirements for the basic safety and essential performance of functional Near-Infrared Spectroscopy (NIRS) equipment
• IEC/CD 80000-15 – Quantities and units — Part 15: Logarithmic and related quantities
• IEC/CD 63339.2 – Unified reference model for smart manufacturing
• IEC/DIS 62321-11 – Determination of certain substances in electrotechnical products — Part 11: Determination of Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS)
• IEC/CD 81355-1 – Classification and designation of documents for plants, systems and equipment — Part 1: Rules and classification tables
• IEC/CD 80601-2-86.2 – Medical electrical equipment — Part 2-86: Particular requirements for the basic safety and essential performance of electrocardiographs, including diagnostic equipment, monitoring equipment, ambulatory equipment, electrodes, cables and leadwires
• IEC/DTR 63319 – A meta-modelling analysis approach to smart manufacturing reference models
• IEC/DIS 80601-2-58 – Medical electrical equipment — Part 2-58: Particular requirements for basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery
• IEC/DIS 63086-2-1 – Household and similar electrical air cleaning appliances – Methods for measuring the performance — Part 2-1: Particular requirements for determination of reduction of particles
• IEC/IEEE 80005-2 – Utility connections in port — Part 2: High and low voltage shore connection systems — Data communication for monitoring and control
• IEC/IEEE 80005-1 – Utility connections in port — Part 1: High voltage shore connection (HVSC) systems — General requirements — Amendment 2
• IEC/FDIS 80000-6 – Quantities and units — Part 6: Electromagnetism
• IEC/PAS 60092-510 – Electrical installations in ships — Special features — High Voltage Shore Connection Systems (HVSC-Systems) — Part 510:
• IEC/IEEE DIS 80005-3 – Utility connections in port — Part 3: Low Voltage Shore Connection (LVSC) Systems — General requirements
• IEC/IEEE 82079-1 – Preparation of information for use (instructions for use) of products — Part 1: Principles and general requirements
• IEC/TR 62366-2 – Medical devices — Part 2: Guidance on the application of usability engineering to medical devices
• IEC/TR 60601-4-1 – Medical electrical equipment — Part 4-1: Guidance and interpretation — Medical electrical equipment and medical electrical systems employing a degree of autonomy
• IEC/PAS 80005-3 – Utility connections in port — Part 3: Low Voltage Shore Connection (LVSC) Systems — General requirements
• IEC/TR 62653 – Guidelines for the safe use of medical products in dialysis treatment
• IEC/TR 80001-2-1 – Application of risk management for IT-networks incorporating medical devices — Part 2-1: Step by Step Risk Management of Medical IT-Networks; Practical Applications and Examples
• IEC/TR 63258 – Nanotechnologies — A guideline for ellipsometry application to evaluate the thickness of nanoscale films
• IEC/TR 80001-2-4 – Application of risk management for IT-networks incorporating medical devices — Part 2-4: General implementation guidance for Healthcare Delivery Organizations
• IEC/TR 80001-2-3 – Application of risk management for IT-networks incorporating medical devices — Part 2-3: Guidance for wireless networks
• IEC/TR 80001-2-2 – Application of risk management for IT-networks incorporating medical devices — Part 2-2: Guidance for the communication of medical device security needs, risks and controls
• IEC/TR 80001-2-9 – Application of risk management for IT-networks incorporating medical devices — Part 2-9: Application guidance — Guidance for use of security assurance cases to demonstrate confidence in IEC/TR 80001-2-2 security capabilities
• IEC/TR 80001-2-8 – Application of risk management for IT-networks incorporating medical devices — Part 2-8: Application guidance — Guidance on standards for establishing the security capabilities identified in IEC 80001-2-2
• IEC/TR 80001-2-5 – Application of risk management for IT-networks incorporating medical devices — Part 2-5: Application guidance — Guidance for distributed alarm systems

12Next