List of Nuclear Technology Standards

• ASTM ISO/ASTM52701 – Standard Guide for Performance Characterization of Dosimeters and Dosimetry Systems for Use in Radiation Processing
• ASTM ISO/ASTM51940 – Standard Guidance for Dosimetry for Sterile Insect Release Programs
• ASTM ISO/ASTM51956 – Standard Practice for Use of Thermoluminescence-Dosimetry (TLD) Systems for Radiation Processing
• ASTM ISO/ASTM52116 – Standard Practice for Dosimetry for a Self-Contained Dry-Storage Gamma Irradiator
• ASTM ISO/ASTM52303 – Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
• ASTM ISO/ASTM52628 – Standard Practice for Dosimetry in Radiation Processing
• ASTM ISO/ASTM51540 – Standard Practice for Use of a Radiochromic Liquid Dosimetry System (Withdrawn 2020)
• ASTM ISO/ASTM51607 – Standard Practice for Use of the Alanine-EPR Dosimetry System
• ASTM ISO/ASTM51608 – Standard Practice for Dosimetry in an X-Ray (Bremsstrahlung) Facility for Radiation Processing at Energies between 50 keV and 7.5 MeV
• ASTM ISO/ASTM51631 – Standard Practice for Use of Calorimetric Dosimetry Systems for Dose Measurements and Routine Dosimetry System Calibration in Electron Beams
• ASTM ISO/ASTM51649 – Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 300 keV and 25 MeV
• ASTM ISO/ASTM51650 – Standard Practice for Use of a Cellulose Triacetate Dosimetry System
• ASTM ISO/ASTM51702 – Standard Practice for Dosimetry in a Gamma Facility for Radiation Processing
• ASTM ISO/ASTM51205 – Standard Practice for Use of a Ceric-Cerous Sulfate Dosimetry System
• ASTM ISO/ASTM51707 – Standard Guide for Estimation of Measurement Uncertainty in Dosimetry for Radiation Processing
• ASTM ISO/ASTM51261 – Standard Practice for Calibration of Routine Dosimetry Systems for Radiation Processing
• ASTM ISO/ASTM51818 – Standard Practice for Dosimetry in an Electron Beam Facility for Radiation Processing at Energies Between 80 and 300 keV
• ASTM ISO/ASTM51275 – Standard Practice for Use of a Radiochromic Film Dosimetry System
• ASTM ISO/ASTM51900 – Standard Guide for Dosimetry in Radiation Research on Food and Agricultural Products
• ASTM ISO/ASTM51276 – Standard Practice for Use of a Polymethylmethacrylate Dosimetry System
• ASTM ISO/ASTM51939 – Standard Practice for Blood Irradiation Dosimetry
• ASTM ISO/ASTM51310 – Standard Practice for Use of a Radiochromic Optical Waveguide Dosimetry System
• ASTM ISO/ASTM51401 – Standard Practice for Use of a Dichromate Dosimetry System
• ASTM ISO/ASTM51431 – Standard Practice for Dosimetry in Electron Beam and X-Ray (Bremsstrahlung) Irradiation Facilities for Food Processing (Withdrawn 2018)
• ASTM ISO/ASTM51538 – Standard Practice for Use of the Ethanol-Chlorobenzene Dosimetry System
• ASTM ISO/ASTM51539 – Standard Guide for Use of Radiation-Sensitive Indicators
• ASTM ISO/ASTM51026 – Standard Practice for Using the Fricke Dosimetry System
• ASTM ISO/ASTM51204 – Standard Practice for Dosimetry in Gamma Irradiation Facilities for Food Processing (Withdrawn 2013)
• ASTM F526 – Standard Test Method for Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines
• ASTM F1885 – Standard Guide for Irradiation of Dried Spices, Herbs, and Vegetable Seasonings to Control Pathogens and Other Microorganisms
• ASTM F1736 – Standard Guide for Irradiation of Finfish and Aquatic Invertebrates Used as Food to Control Pathogens and Spoilage Microorganisms
• ASTM F1640 – Standard Guide for Selection and Use of Contact Materials for Foods to Be Irradiated
• ASTM F1356 – Standard Guide for Irradiation of Fresh, Frozen or Processed Meat and Poultry to Control Pathogens and Other Microorganisms
• ASTM F1355 – Standard Guide for Irradiation of Fresh Agricultural Produce as a Phytosanitary Treatment
• ASTM E971 – Standard Practice for Calculation of Photometric Transmittance and Reflectance of Materials to Solar Radiation
• ASTM E972 – Standard Test Method for Solar Photometric Transmittance of Sheet Materials Using Sunlight
• ASTM E973 – Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell
• ASTM E973M – Standard Test Method for Determination of the Spectral Mismatch Parameter Between a Photovoltaic Device and a Photovoltaic Reference Cell [Metric] (Withdrawn 2005)
• ASTM E974 – Standard Guide for Specifying Thermal Performance of Geothermal Power Systems
• ASTM E948 – Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
• ASTM E957 – Standard Terminology Relating to Geothermal Energy
• ASTM E927 – Standard Classification for Solar Simulators for Electrical Performance Testing of Photovoltaic Devices
• ASTM E942 – Standard Guide for Investigating the Effects of Helium in Irradiated Metals
• ASTM E944 – Standard Guide for Application of Neutron Spectrum Adjustment Methods in Reactor Surveillance
• ASTM E947 – Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
• ASTM E903 – Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using Integrating Spheres
• ASTM E904 – Standard Practice for Generating All-Day Thermal Performance Data for Solar Collectors (Withdrawn 2013)
• ASTM E905 – Standard Test Method for Determining Thermal Performance of Tracking Concentrating Solar Collectors
• ASTM E910 – Standard Test Method for Application and Analysis of Helium Accumulation Fluence Monitors for Reactor Vessel Surveillance
• ASTM E900 – Standard Guide for Predicting Radiation-Induced Transition Temperature Shift in Reactor Vessel Materials
• ASTM E901 – Classification System for Uranium Resources (Withdrawn 2001)
• ASTM E881 – Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode
• ASTM E853 – Standard Practice for Analysis and Interpretation of Light-Water Reactor Surveillance Neutron Exposure Results
• ASTM E854 – Standard Test Method for Application and Analysis of Solid State Track Recorder (SSTR) Monitors for Reactor Surveillance
• ASTM E861 – Standard Practice for Evaluating Thermal Insulation Materials for Use in Solar Collectors
• ASTM E844 – Standard Guide for Sensor Set Design and Irradiation for Reactor Surveillance
• ASTM E821 – Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation
• ASTM E822 – Standard Practice for Determining Resistance of Solar Collector Covers to Hail by Impact With Propelled Ice Balls
• ASTM E823 – Standard Practice for Nonoperational Exposure and Inspection of a Solar Collector (Withdrawn 2010)
• ASTM E781 – Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates
• ASTM E782 – Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
• ASTM E798 – Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources
• ASTM E763 – Practice for Calculation of Absorbed Dose From Neutron Irradiation by Application of Threshold-Foil Measurement Data (Withdrawn 1997)
• ASTM E772 – Standard Terminology of Solar Energy Conversion
• ASTM E745 – Standard Practices for Simulated Service Testing for Corrosion of Metallic Containment Materials for Use With Heat-Transfer Fluids in Solar Heating and Cooling Systems (Withdrawn 2018)
• ASTM E744 – Standard Practice for Evaluating Solar Absorptive Materials for Thermal Applications
• ASTM E705 – Standard Test Method for Measuring Reaction Rates by Radioactivation of Neptunium-237
• ASTM E706 – Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards
• ASTM E712 – Standard Practice for Laboratory Screening of Metallic Containment Materials for Use With Liquids in Solar Heating and Cooling Systems (Withdrawn 2018)
• ASTM E720 – Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics
• ASTM E721 – Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics
• ASTM E722 – Standard Practice for Characterizing Neutron Fluence Spectra in Terms of an Equivalent Monoenergetic Neutron Fluence for Radiation-Hardness Testing of Electronics
• ASTM E692 – Standard Test Method for Determining the Content of Cesium-137 in Irradiated Nuclear Fuels by High-Resolution Gamma-Ray Spectral Analysis (Withdrawn 2013)
• ASTM E693 – Standard Practice for Characterizing Neutron Exposures in Iron and Low Alloy Steels in Terms of Displacements Per Atom (DPA)
• ASTM E704 – Standard Test Method for Measuring Reaction Rates by Radioactivation of Uranium-238
• ASTM E666 – Standard Practice for Calculating Absorbed Dose From Gamma or X Radiation
• ASTM E668 – Standard Practice for Application of Thermoluminescence-Dosimetry (TLD) Systems for Determining Absorbed Dose in Radiation-Hardness Testing of Electronic Devices
• ASTM E683 – Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
• ASTM E636 – Standard Guide for Conducting Supplemental Surveillance Tests for Nuclear Power Reactor Vessels
• ASTM E560 – Standard Practice for Extrapolating Reactor Vessel Surveillance Dosimetry Results, E706(IC) (Withdrawn 2009)
• ASTM E531 – Standard Practice for Surveillance Testing of High-Temperature Nuclear Component Materials (Withdrawn 2022)
• ASTM E521 – Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation
• ASTM E523 – Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper
• ASTM E525 – Practice for Reporting Dosimetry Results on Nuclear Graphite (Withdrawn 2001)
• ASTM E526 – Standard Test Method for Measuring Fast-Neutron Reaction Rates By Radioactivation of Titanium
• ASTM E496 – Standard Test Method for Measuring Neutron Fluence and Average Energy from 3H(d,n)4He Neutron Generators by Radioactivation Techniques
• ASTM E509/E509M – Standard Guide for In-Service Annealing of Light-Water Moderated Nuclear Reactor Vessels
• ASTM E481 – Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver
• ASTM E482 – Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance
• ASTM E453 – Standard Practice for Examination of Fuel Element Cladding Including the Determination of the Mechanical Properties (Withdrawn 2008)
• ASTM E424 – Standard Test Methods for Solar Energy Transmittance and Reflectance (Terrestrial) of Sheet Materials
• ASTM E385 – Standard Test Method for Oxygen Content Using a 14-MeV Neutron Activation and Direct-Counting Technique
• ASTM E393 – Standard Test Method for Measuring Reaction Rates by Analysis of Barium-140 From Fission Dosimeters
• ASTM E343 – Standard Test Method for Measuring Reaction Rates by Analysis of Molybdenum-99 Radioactivity From Fission Dosimeters (Withdrawn 2002)
• ASTM E3325 – Standard Practice for Sampling of Solar Photovoltaic Modules for Toxicity Testing
• ASTM E3270 – Standard Guide for Operational Qualification of Gamma Irradiators
• ASTM E3283 – Standard Practice for Preparation of Loose Radiological/Surrogate Contamination on Nonporous Test Coupon Surfaces for Evaluation of Decontamination Techniques
• ASTM E3239 – Standard Guide for Using Statistical Process Control Principles for Routine Dosimetry in Radiation Processing
• ASTM E3205 – Standard Test Method for Small Punch Testing of Metallic Materials
• ASTM E321 – Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)

12Next