List of Rockets, Rocket Ammunition and Rocket Components Standards

• MIL-STD-310 – JETTISON (AIRCRAFT SAFE FIRING) TEST FOR USE IN THE DEVELOPMENT OF ROCKET TYPE FUZES (S/S BY MIL-STD-331)
• MIL-STD-1505 – REFURBISHMENT PROCEDURES, ROCKET MOTOR AIR-2A (NO S/S DOCUMENT)
• MIL-STD-1506 – INSPECTION AND REPAIR PROCEDURE. AFT CLOSURE AND EXIT CONE ASSEMBLY BOND SEPARATION AIR-2A ROCKET MOTOR (NO S/S DOCUMENT)
• MIL-STD-2126 – REDUCED SMOKE ROCKET MOTOR PROCESSING & TEST PROCEDURES (SIDEWINDER) (NO S/S DOCUMENT)
• QPL-6100 – CONNECTOR, RECEPTACLE, ELECTRICAL AIRCRAFT (NO S/S DOCUMENT)
• MIL-S-85565 – SERVO, COLD GAS (NO S/S DOCUMENT)
• MIL-T-85630 – TUBE, MOTOR, FOR 2.75 INCH ROCKET, MARK 66
• MIL-M-85657 – MOTOR, ROCKET, 2.75 INCH, MARK 66 MODS (NO S/S DOCUMENT)
• MIL-DTL-85760 – Igniter, MK 304 Mod 0
• MIL-DTL-85769 – Rocket Motor, MK 117 MOD 0
• MIL-R-85880 – Rocket, Jet Assisted Take Off (JATO) Propulsion System, General Development Specification for
• MIL-I-85889 – Igniter, Jet Assisted Take Off (JATO) Propulsion System General Development Specification for
• MIL-L-83066 – Liner and Inhibitor Material for Rocket Motors (No S/S Document)
• MS33597 – JATO Unit, Aircraft, 1000 Pounds Thrust, Outline Dimensions for
• MIL-R-83067 – ROCKETSONDE, LOKI-DART (NO S/S DOCUMENT)
• MIL-STD-292 – Ballistic Nomenclature, Rocket Static Tests (No S/S Document)
• MIL-R-83403 – ROCKET MOTOR SR110-AD-1 (NO S/S DOCUMENT)
• MIL-STD-308 – JETTISON (SIMULATED AIRCRAFT SAFE FIRING, FROM GROUND LAUNCHER) TEST FOR USE IN THE DEVELOPMENT OF ROCKET-TYPE FUZES (S/S BY MIL-STD-331)
• MIL-R-83404 – ROCKET MOTOR MANUFACTURING ROCKET MOTOR SR110-AD-1 (NO S/S DOCUMENT)
• MIL-STD-309 – JETTISON (SIMULATED AIRCRAFT, SAFE DROP, FROM GROUND LAUNCHER) TEST FOR USE IN DEVELOPMENT OF FUZES (S/S BY MIL-STD-331)
• MIL-P-83405 – PROPELLANT, COMPOSITE ADC-109 (NO S/S DOCUMENT)
• MIL-R-85363 – Rocket Motor Mark 23 Mods 2 & 3
• MIL-P-85364 – Propellant, CTBN 23-17
• MIL-I-85365 – Igniter Mark 296 Mods (Loaded Assembly)
• MIL-I-85487 – Igniter, Rocket Motor, Mark 297 Mod 1 (No S/S Document)
• MIL-S-82849 – SWITCH, ARM ENABLE, ROCKET MOTOR MK 104 (NO S/S DOCUMENT)
• MIL-S-82850 – SPRING, BELLEVILLE WASHER, ARM/ENABLE SWITCH (NO S/S DOCUMENT)
• MIL-DTL-82870 – Motor Rocket, 11.65 Inch, Loaded, Mark 37 Mod 0 (Assembly) and Propellant Grain, Mark 55 Mod 0
• MIL-B-82800 – Broadgoods, Graphite Cloth, Phenolic-Preimpregnated (No S/S Document)
• MIL-DTL-82951 – Igniter, MK 311 Mod 0, Loading, Assembling, and Packaging
• MIL-T-82806 – TAPE, SILICA CLOTH, PHENOLIC-PREIMPREGNATED (NO S/S DOCUMENT)
• MIL-DTL-82952 – Initiator, MK 26 Mod 0
• MIL-PRF-82815 – LIQUID, ANTISTATIC
• MIL-R-83064 – ROCKET MOTOR SR71-AD-1 (NO S/S DOCUMENT)
• MIL-I-82819 – Insulation, Thermal, Polyisoprene, Silica and Asbestos Filler (No S/S Document)
• MIL-P-83065 – PROPELLANT, COMPOSITE ADC-101
• MIL-I-82826 – Igniter Assembly (No S/S Document)
• MIL-C-82827 – Compound, Antioxidant (No S/S Document)
• MIL-T-82831 – TACKIFIER, EPDM (NO S/S DOCUMENT)
• MIL-A-82832 – Adhesive, Epoxy Resin, Structural Bonding (No S/S Document)
• MIL-T-82833 – TUNGSTEN, THORIATED, TWO PERCENT, FORGED AND CUPPED (NO S/S DOCUMENT)
• MIL-T-82835 – TAPE, FOAM (NO S/S DOCUMENT)
• MIL-T-82839 – TAPE, CARBON CLOTH, PHENOLIC-PREIMPREGNATED (NO S/S DOCUMENT)
• MIL-T-82840 – TAPE, SILICA CLOTH, PHENOLIC-PREIMPREGNATED (NO S/S DOCUMENT)
• MIL-T-82846 – THREAD, SPLICING, NYLON (NO S/S DOCUMENT)
• MIL-A-82772 – Assembly, AFT Closure, In-Process Requirements for (No S/S Document)
• MIL-PRF-82791 – RUBBER, SILICONE, TRV
• MIL-S-82773 – SUPPORT, THROAT, IN-PROCESS REQUIREMENTS FOR (NO S/S DOCUMENT)
• MIL-B-82792 – Broadgoods, Carbon Cloth, Phenolic-Preimpregnated (No S/S Document)
• MIL-G-82775 – Graphite Cloth Phenolic Components, Molded and Cured in-Process Requirements for (No S/S Document)
• MIL-F-82795 – Floats, Pulp, Asbestos (No S/S Document)
• MIL-I-82776 – Insulator, Exit Cone In-Process Requirements for (No S/S Document)
• MIL-I-82777 – Insulation, Insert In-Process Requirements for (No S/S Document)
• MIL-E-82778 – Exit Cone Assembly, In-Process Requirements for (No S/S Document)
• MIL-R-82779 – RING, EXIT, AFT IN-PROCESS REQUIREMENTS FOR (NO S/S DOCUMENT)
• MIL-I-82780 – Insulation, Closure, In-Process Requirements for (No S/S Document)
• MIL-I-82781 – Inlet, Throat, In-Process Requirements for (No S/S Document)
• MIL-L-82782 – Liner, Aft, In-Process Requirements for (No S/S Document)
• MIL-R-82784 – ROD, PLASTIC (NO S/S DOCUMENT)
• MIL-T-82786 – TAPE, CARBON CLOTH, PHENOLIC-PREIMPREGNATED (NO S/S DOCUMENT)
• MIL-I-82787 – Igniter Assembly, Rocket Motor MK 104 (No S/S Document)
• MIL-L-82788 – Liner, Formulation of (UF-2155) (No S/S Document)
• MIL-B-82789 – Broadgoods, Silica Cloth, Phenolic-Preimpregnated (No S/S Document)
• MIL-I-82771 – Insulation, Closure, In-Process Requirements for (No S/S Document)
• MIL-P-82790 – PROPELLANT GRAIN, RADIOGRAPHIC INSPECTION OF IN-PROCESS REQUIREMENTS FOR (NO S/S DOCUMENT)
• MIL-F-70673 – Fuze, Rocket, Base Detonating, M442
• MIL-W-71069 – WARHEAD, 2.75 INCH ROCKET, FLECHETTE: XM255E1
• MIL-L-81097 – Launcher, Rocket, Airborne, LAU-32B/A (No S/S Document)
• MIL-R-81128 – Rocket Motors, Identification of  Parts and Assemblies, Requirements for
• MIL-S-82529 – Switch, Thermal Mark 56 Mod 1 (No S/S Document)
• MIL-P-82530 – PRIMER, ELECTRIC, MK 137 MOD 0
• MIL-L-82531 – Lead, Explosive, MK 5 Mod 0
• MIL-I-82532 – Igniter, Rocket Motor Mark 251 Mod 0
• MIL-P-82534 – Programmer, Range and Airframe Separation Mark 3 Mod
• MIL-T-82535 – Timer, Interval Mark 11 Mod 2 (Assembly) (No S/S Document)
• MIL-R-82619 – ROCKET MOTOR, MARK 81 MOD 0 (LOADED ASSEMBLY) (NO S/S DOCUMENT)
• MIL-W-63468 – Warhead, 2.75 Inch Rocket, H.E.: M261
• MIL-P-82691 – Propellant Grain, Igniter
• MIL-W-64044 – Warhead, 2.75 Inch Rocket, M261 and M267, Part for
• MIL-DTL-82761 – Propellant Grain, ASROC Rocket Motor, Reworked
• MIL-W-70434 – Warhead, 2.75 Inch Rocket, Test, Empty, Modified: PXR6358 with Flash, Parts and Assembly
• MIL-A-82769 – Assembly, AFT Closure, Silicone Rubber, Room Temperature Vulcanizing In-Process Requirements for (No S/S Document)
• MIL-W-70467 – Warhead, 2.75 Inch Rocket, Practice: XM274
• MIL-I-82770 – Inlet, Throat, In-Process Requirements for (No S/S Document)
• MIL-W-70622 – Warhead, 2.75 Inch Rocket, Test, PXR6369, with Smoke for Test: Fuze, Rocket, M433 (No S/S Document)
• MIL-T-60916 – TUBE, MOTOR, INTEGRAL BULKHEAD, FOR ROCKET MOTOR 2.75 INCH, MARK 4 AND MARK 40 (NO S/S DOCUMENT)
• MIL-S-60928 – SUPPORTS, CHARGE, FOR 2.75 INCH ROCKET, MARK 40 AND MARK 4 (NO S/S DOCUMENT)
• MIL-W-60931 – WARHEAD, 2.75 INCH ROCKET, PRACTICE XM232, WITH OR WITHOUT FUZE (NO S/S DOCUMENT)
• MIL-R-60995 – ROCKET MOTOR, 2.75 INCH ROCKET, MARK 40 AND MODS, MARK 4 AND MODS LOADING, ASSEMBLING AND PACKING (NO S/S DOCUMENT)
• MIL-C-63085 – Cable, Assembly, Rocket for Demolition Kit, Cratering, M180 Assembling and Packing
• MIL-B-63086 – Booster Assembly for Demolition Kit Cratering, M180 Parts for, Loading, Assembling and Packing
• MIL-T-63262 – Test Mode Assembly, Rocket: M180 Cratering Device Propellant Testing
• MIL-R-60453 – ROCKET, 762MM, WARHEAD SECTION, HE, XM186 AND M144 OGIVE FOR (NO S/S DOCUMENT)
• MIL-F-63281 – Fuze, Rocket: M433 Less Booster and Booster Lead
• MIL-PRF-60455 – Igniter, Mark 125 MOD 5 Parts for
• MIL-W-63377 – WARHEAD, ILLUMINATING, M257, W/M442 FUZE (2.75 INCH ROCKET ILLUMINATING FLARE)
• MIL-I-60476 – Igniter, Mark 125 Mod 5, Loading Assembling and Packing
• MIL-W-63441 – Warhead, 2.75 Inch Rocket, Practice: M267
• MIL-F-60480 – Fin Blade, for Rocket Motor 2.75 Inch Mark 40 and Mark 4 (No S/S Document)
• MIL-F-63446 – Fuzes, General Purpose Grenade: M230 and M231 (Practice)

12Next