List of Aerospace Material Standards

• ASTM E595 – Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
• ASTM F945 – Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
• ASTM F942 – Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
• ASTM F91 – Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
• ASTM F862 – Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
• ASTM F790 – Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
• ASTM F791 – Standard Test Method for Stress Crazing of Transparent Plastics
• ASTM F801 – Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
• ASTM F733 – Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
• ASTM F734 – Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
• ASTM F735 – Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
• ASTM F736 – Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
• ASTM F71 – Standard Practice for Using the Morphological Key for the Rapid Identification of Fibers for Contamination Control in Electron Devices and Microelectronics (Withdrawn 2005)
• ASTM F521 – Standard Test Methods for Bond Integrity of Transparent Laminates
• ASTM F548 – Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
• ASTM F51/F51M – Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
• ASTM F519 – Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
• ASTM F520 – Standard Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
• ASTM F502 – Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
• ASTM F50 – Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
• ASTM F482 – Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
• ASTM F483 – Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
• ASTM F484 – Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
• ASTM F485 – Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
• ASTM F428 – Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
• ASTM F3586 – Standard Practice for Remote ID Means of Compliance to Federal Aviation Administration Regulation 14 CFR Part 89
• ASTM F3532 – Standard Practice for Protection of Aircraft Systems from Intentional Unauthorized Electronic Interactions
• ASTM F3548 – Standard Specification for UAS Traffic Management (UTM) UAS Service Supplier (USS) Interoperability
• ASTM F3563 – Standard Specification for Design and Construction of Large Fixed Wing Unmanned Aircraft Systems
• ASTM F3491 – Standard Practice for Enhanced Indication Methods in Aircraft
• ASTM F3498 – Standard Practice for Developing Simplified Fatigue Load Spectra
• ASTM F3526 – Standard Guide for Aircraft Instrument Systems Technician Certification
• ASTM F3457 – Standard Guide for Aircraft Certification Education Standards for Engineers and Professionals in Aerospace Industry
• ASTM F3478 – Standard Practice for Development of a Durability and Reliability Flight Demonstration Program for Low-Risk Unmanned Aircraft Systems (UAS) under FAA Oversight
• ASTM F3432 – Standard Practice for Powerplant Instruments
• ASTM F3440 – Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals
• ASTM F3442/F3442M – Standard Specification for Detect and Avoid System Performance Requirements
• ASTM F3450 – Standard Guide for Flight Hazard and Surveillance Systems Personnel Certification
• ASTM F3454 – Standard Practice for Alerting Methods in Aircraft
• ASTM F3408/F3408M – Standard Specification for Aircraft Emergency Parachute Recovery Systems
• ASTM F3411 – Standard Specification for Remote ID and Tracking
• ASTM F3423/F3423M – Standard Specification for Vertiport Design
• ASTM F3425 – Standard Guide for Aircraft Electronics Installation Technician Certification
• ASTM F3376 – Standard Guide for Core Competencies for Aviation Maintenance Personnel
• ASTM F3379 – Standard Guide for Training for Public Safety Remote Pilot of Unmanned Aircraft Systems (UAS) Endorsement
• ASTM F3380 – Standard Practice for Structural Compliance of Very Light Aeroplanes
• ASTM F3389/F3389M – Standard Test Method for Assessing the Safety of Small Unmanned Aircraft Impacts
• ASTM F3396/F3396M – Standard Practice for Aircraft Simplified Loads Criteria
• ASTM F3397/F3397M – Standard Practice for Aeroplane Turbine Fuel System Hot Weather Operations
• ASTM F3367 – Standard Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft
• ASTM F3361 – Standard Guide for Classifying Alterations for In-Service Aircraft under FAA Authority Oversight
• ASTM F3362 – Standard Guide for Onboard Communication & Safety Systems Personnel Certification
• ASTM F3364 – Standard Practice for Independent Audit Program for Unmanned Aircraft Operators
• ASTM F3365 – Standard Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems
• ASTM F3366 – Standard Specification for General Maintenance Manual (GMM) for a small Unmanned Aircraft System (sUAS)
• ASTM F3330 – Standard Specification for Training and the Development of Training Manuals for the UAS Operator
• ASTM F3331 – Standard Practice for Aircraft Water Loads
• ASTM F3338 – Standard Specification for Design of Electric Engines for General Aviation Aircraft
• ASTM F3341/F3341M – Standard Terminology for Unmanned Aircraft Systems
• ASTM F3309/F3309M – Standard Practice for Simplified Safety Assessment of Systems and Equipment in Small Aircraft
• ASTM F3310 – Standard Specification for Non-Essential Ice Detectors for Aircraft
• ASTM F331 – Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
• ASTM F3316/F3316M – Standard Specification for Electrical Systems for Aircraft with Electric or Hybrid-Electric Propulsion
• ASTM F3322 – Standard Specification for Small Unmanned Aircraft System (sUAS) Parachutes
• ASTM F3298 – Standard Specification for Design, Construction, and Verification of Lightweight Unmanned Aircraft Systems (UAS)
• ASTM F330 – Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
• ASTM F326 – Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
• ASTM F3264 – Standard Specification for Normal Category Aeroplanes Certification
• ASTM F3266 – Standard Guide for Training for Remote Pilot in Command of Unmanned Aircraft Systems (UAS) Endorsement
• ASTM F3269 – Standard Practice for Methods to Safely Bound Behavior of Aircraft Systems Containing Complex Functions Using Run-Time Assurance
• ASTM F327 – Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
• ASTM F3236 – Standard Specification for High Intensity Radiated Field (HIRF) Protection in Small Aircraft
• ASTM F3238 – Standard Specification for Design and Installation of an Infrared (IR) Searchlight System (USA)
• ASTM F3239 – Standard Specification for Aircraft Electric Propulsion Systems
• ASTM F3245 – Standard Guide for Aircraft Electronics Technician Personnel Certification
• ASTM F3246 – Standard Specification for Quality Assurance for Manufacturers of Aircraft Systems
• ASTM F3254 – Standard Specification for Aircraft Interaction of Systems and Structures
• ASTM F3231/F3231M – Standard Specification for Electrical Systems for Aircraft with Combustion Engine Electrical Power Generation
• ASTM F3232/F3232M – Standard Specification for Flight Controls in Small Aircraft
• ASTM F3233/F3233M – Standard Specification for Flight and Navigation Instrumentation in Aircraft
• ASTM F3234/F3234M – Standard Specification for Exterior Lighting in Small Aircraft
• ASTM F3235 – Standard Specification for Aircraft Storage Batteries
• ASTM F3227/F3227M – Standard Specification for Environmental Systems in Aircraft
• ASTM F3228 – Standard Specification for Flight Data and Voice Recording in Small Aircraft
• ASTM F3229/F3229M – Standard Practice for Static Pressure System Tests in Small Aircraft
• ASTM F3230 – Standard Practice for Safety Assessment of Systems and Equipment in Small Aircraft
• ASTM F3196 – Standard Practice for Seeking Approval for Beyond Visual Line of Sight (BVLOS) Small Unmanned Aircraft System (sUAS) Operations
• ASTM F3201 – Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
• ASTM F320 – Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
• ASTM F3178 – Standard Practice for Operational Risk Assessment of Small Unmanned Aircraft Systems (sUAS)
• ASTM F3179/F3179M – Standard Specification for Performance of Aircraft
• ASTM F3180/F3180M – Standard Specification for Low-Speed Flight Characteristics of Aircraft
• ASTM F318 – Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
• ASTM F319 – Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
• ASTM F3153 – Standard Specification for Verification of Aircraft Systems and Equipment
• ASTM F3173/F3173M – Standard Specification for Aircraft Handling Characteristics
• ASTM F3174/F3174M – Standard Specification for Establishing Operating Limitations and Information for Aeroplanes
• ASTM F312 – Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
• ASTM F311 – Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
• ASTM F3114 – Standard Specification for Structures

12Next