List of Security System Pedestrian and Walkway Safety Standards

• ASTM F967 – Standard Practice for Security Engineering Symbols
• ASTM F946 – Standard Guide for Establishing Security Seal Control and Accountability Procedures
• ASTM F947 – Standard Test Method for Determining Low-Level X-Radiation Sensitivity of Photographic Films (Withdrawn 2005)
• ASTM F883 – Standard Performance Specification for Padlocks
• ASTM F832 – Standard Classification for Security Seals
• ASTM F792 – Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
• ASTM F802 – Standard Guide for Selection of Certain Walkway Surfaces When Considering Footwear Traction (Withdrawn 2012)
• ASTM F694 – Standard Test Method for Heel-Attaching Strength of Women’s Shoes (Withdrawn 2008)
• ASTM F695 – Standard Practice for Ranking of Test Data Obtained for Measurement of Slip Resistance of Footwear Sole, Heel, and Related Materials (Withdrawn 2018)
• ASTM F609 – Standard Test Method for Using a Horizontal Pull Slipmeter (HPS) (Withdrawn 2022)
• ASTM F571 – Standard Practice for Installation of Exit Devices in Security Areas
• ASTM F572 – Practice for Application of Film Security Cameras in Financial Institutions (Withdrawn 2001)
• ASTM F489 – Standard Test Method for Using a James Machine (Withdrawn 2005)
• ASTM F471 – Standard Terminology Relating to Combination Locks (Withdrawn 2011)
• ASTM F476 – Standard Test Methods for Security of Swinging Door Assemblies
• ASTM F3539 – Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
• ASTM F3561 – Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack
• ASTM F3445 – Standard Specification for Performance Requirements when Evaluating Slip Resistance of Protective (Safety) Footwear using ASTM F2913 Whole Shoe Test Method
• ASTM F3455/F3455M – Standard Practice for Establishing the Minimum- and Maximum-Width Configurations for Crash Testing of Exceptionally Long Variable-Width Vehicle Barriers
• ASTM F3356 – Standard Practice for Conformity Assessment of Metal Detectors Used in Safety and Security
• ASTM F3278 – Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security
• ASTM F3132 – Standard Practice for Selection of Walkway Surfaces When Considering Pedestrian Safety
• ASTM F3057 – Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings
• ASTM F3038 – Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
• ASTM F3006 – Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
• ASTM F3007 – Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
• ASTM F3016/F3016M – Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds
• ASTM F3020 – Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security
• ASTM F2965 – Standard Guide for Selection of Walkway Surfaces and Treatments When Considering Aggressive Contaminant Conditions in Commercial and Industrial (Not Including Construction) Environments (Withdrawn 2022)
• ASTM F2966 – Standard Guide for Snow and Ice Control for Walkway Surfaces
• ASTM F2948 – Standard Guide to Walkway Auditor Qualifications
• ASTM F2927 – Standard Test Method for Door Systems Subject to Airblast Loadings
• ASTM F2912 – Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
• ASTM F2913 – Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
• ASTM F2892 – Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
• ASTM F2766 – Standard Test Method for Boat Barriers
• ASTM F2656/F2656M – Standard Test Method for Crash Testing of Vehicle Security Barriers
• ASTM F2508 – Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
• ASTM F2401 – Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
• ASTM F2412 – Standard Test Methods for Foot Protection
• ASTM F2413 – Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
• ASTM F2348 – Standard Performance Specification for Privacy Padlocks
• ASTM F2247 – Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
• ASTM F2248 – Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
• ASTM F2232 – Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
• ASTM F2155 – Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
• ASTM F2069 – Standard Practice for Evaluation of Explosives Vapor Detectors (Withdrawn 2009)
• ASTM F2048 – Standard Practice for Reporting Slip Resistance Test Results
• ASTM F1699 – Standard Classification for Passive Fiber Optic Seals
• ASTM F1677 – Standard Test Method for Using a Portable Inclineable Articulated Strut Slip Tester (PIAST) (Withdrawn 2006)
• ASTM F1678 – Standard Test Method for Using a Portable Articulated Strut Slip Tester (PAST) (Withdrawn 2005)
• ASTM F1679 – Standard Test Method for Using a Variable Incidence Tribometer (VIT) (Withdrawn 2006)
• ASTM F1694 – Standard Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
• ASTM F1637 – Standard Practice for Safe Walking Surfaces
• ASTM F1641 – Standard Test Method for Measuring Penetration Resistance of Security Glazing Using a Pendulum Impactor (Withdrawn 2004)
• ASTM F1642/F1642M – Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
• ASTM F1646 – Standard Terminology Relating to Walkway Safety and Footwear
• ASTM F1532 – Standard Guide for Qualification, Selection, Training, Utilization, and Supervision of Security Screening Personnel (Withdrawn 2001)
• ASTM F1468 – Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
• ASTM F1448 – Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
• ASTM F1247 – Standard Specification for Intrusion Resistant Generic Vault Structures
• ASTM F1233 – Standard Test Method for Security Glazing Materials And Systems
• ASTM F1240 – Standard Guide for Ranking Footwear Bottom Materials on Contaminated Walkway Surfaces According to Slip Resistance Test Results (Withdrawn 2018)
• ASTM F1158 – Standard Guide for Inspection and Evaluation of Tampering of Security Seals
• ASTM F1156 – Terminology Relating to Product Counterfeit Protection Systems (Withdrawn 2001)
• ASTM F1157 – Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
• ASTM F1090 – Standard Classification for Bank and Mercantile Vault Construction
• ASTM F1039 – Standard Test Method for Measurement of Low Level X-Radiation Used in X-Ray Security Screening Systems (Withdrawn 2002)
• ASTM F1029 – Standard Guide for Selection of Physical Security Measures for a Facility (Withdrawn 2004)
• ASTM E3342/E3342M – Specification for Nonballistic-resistant Helmets Specifically Designed to be Worn by Law Enforcement and Corrections Officers When Maintaining Order in Violent Situations
• ASTM E3343/E3343M – Test Methods for Nonballistic-resistant Helmets Worn by Law Enforcement and Corrections
• ASTM E3347/E3347M – Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
• ASTM E3348/E3348M – Standard Guide for Body Armor for Non-Law Enforcement First Responders
• ASTM E3349/E3349M – Standard Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Terrains: K-Rails
• ASTM E3350 – Standard Guide for Community Resilience Planning for Buildings and Infrastructure
• ASTM E3290 – Standard Test Method for Establishing Performance of Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
• ASTM E3299/E3299M – Standard Test Methods for Compression Resistance of Helmets
• ASTM E3310/E3310M – Standard Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Maneuvering: Align Ground Contacts with Parallel Rails
• ASTM E3311/E3311M – Standard Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Obstacles: Variable Height Rails
• ASTM E3276/E3276M – Standard Test Method for Assessing Impact Energy and Precision of Direct-fire, Single-projectile Less Lethal Impact Rounds Used by Public Safety Officers
• ASTM E3289 – Standard Guide for Using Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
• ASTM E3243 – Standard Specification for Field Detection Equipment and Assays Used for Fentanyl and Fentanyl-Related Compounds
• ASTM E3236/E3236M – Standard Specification for Ballistic-resistant Barriers Used in Homeland Security or Public Safety Applications
• ASTM E3212 – Standard Guide for Selection and Procurement of Protective Gloves Worn by Law Enforcement and Corrections
• ASTM E3215 – Standard Practice for Certification of Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
• ASTM E3211 – Standard Practice for Selection, Integration, and Verification of Active Vehicle Barrier Safety Devices
• ASTM E3187/E3187M – Standard Specification for Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
• ASTM E3192/E3192M – Standard Practice for Soft Armor Conditioning by Tumbling
• ASTM E3195 – Standard Guide for Body Armor Program Management
• ASTM E3141/E3141M – Standard Test Method for Ballistic Resistant Shields for Law Enforcement
• ASTM E3110/E3110M – Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
• ASTM E3111/E3111M – Standard Test Methods for Ballistic Resistant Head Protection
• ASTM E3112/E3112M – Standard Test Method for Ballistic-resistant Products and Shoot Packs
• ASTM E3113 – Standard Specification for Ballistic-resistant Vehicle Door Panels Used by Public Safety Agencies
• ASTM E3131 – Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
• ASTM E3132/E3132M – Standard Practice for Evaluating Response Robot Logistics: System Configuration
• ASTM E3095 – Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
• ASTM E3107/E3107M – Standard Test Method for Resistance to Penetration and Backface Deformation for Ballistic-resistant Torso Body Armor and Shoot Packs
• ASTM E3108 – Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers
• ASTM E3109 – Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers

12Next