List of Paint and Related Coating Standards

• ASTM D523 – Standard Test Method for Specular Gloss
• ASTM B633 – Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
• ASTM D4236 – Standard Practice for Labeling Art Materials for Chronic Health Hazards
• ASTM D3359 – Standard Test Methods for Rating Adhesion by Tape Test
• ASTM D4752 – Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
• ASTM E313 – Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
• ASTM G8 – Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
• ASTM G9 – Standard Test Method for Water Penetration into Pipeline Coatings
• ASTM G95 – Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)
• ASTM G70 – Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test) (Withdrawn 2013)
• ASTM G80 – Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings (Withdrawn 2013)
• ASTM G55 – Standard Test Method for Evaluating Pipeline Coating Patch Materials
• ASTM G6 – Standard Test Method for Abrasion Resistance of Pipeline Coatings
• ASTM G62 – Standard Test Methods for Holiday Detection in Pipeline Coatings
• ASTM G42 – Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
• ASTM G19 – Standard Test Method for Disbonding Characteristics of Pipeline Coatings by Direct Soil Burial (Withdrawn 2010)
• ASTM G20 – Standard Test Method for Chemical Resistance of Pipeline Coatings
• ASTM G17 – Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
• ASTM G18 – Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
• ASTM G13/G13M – Standard Test Method for Impact Resistance of Pipeline Coatings(Limestone Drop Test)
• ASTM G13 – Standard Test Method for Impact Resistance of Pipeline Coatings (Limestone Drop Test) (Withdrawn 2003)
• ASTM G14 – Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
• ASTM G11 – Standard Practice for Effects of Outdoor Weathering on Pipeline Coatings
• ASTM G12 – Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel (Withdrawn 2013)
• ASTM G10 – Standard Test Method for Specific Bendability of Pipeline Coatings
• ASTM E991 – Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
• ASTM E848 – Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates
• ASTM E809 – Standard Practice for Measuring Photometric Characteristics of Retroreflectors
• ASTM E810 – Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry
• ASTM E811 – Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions
• ASTM E805 – Standard Practice for Identification of Instrumental Methods of Color or Color-Difference Measurement of Materials
• ASTM E806 – Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
• ASTM E808 – Standard Practice for Describing Retroreflection
• ASTM E70 – Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
• ASTM E649 – Standard Test Method for Bromine in Chlorine
• ASTM E611 – Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography (Withdrawn 2020)
• ASTM E534 – Standard Test Methods for Chemical Analysis of Sodium Chloride
• ASTM E538 – Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)
• ASTM E506 – Standard Test Method for Mercury in Liquid Chlorine
• ASTM E475 – Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
• ASTM E449 – Standard Test Methods for Analysis of Calcium Chloride
• ASTM E410 – Standard Test Method for Moisture and Residue in Liquid Chlorine
• ASTM E411 – Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
• ASTM E430 – Standard Test Methods for Measurement of Gloss of High-Gloss Surfaces by Abridged Goniophotometry
• ASTM E394 – Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
• ASTM E359 – Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
• ASTM E3320 – Standard Test Method for Measurement of Retroreflective Pavement Marking Materials Using a Mobile Retroreflectometer Unit (MRU)
• ASTM E324 – Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
• ASTM E3165 – Standard Test Method for Nighttime Retroreflected Chromaticity of Retroreflective Sheeting
• ASTM E312 – Standard Practice for Description and Selection of Conditions for Photographing Specimens Using Analog (Film) Cameras and Digital Still Cameras (DSC) (Withdrawn 2017)
• ASTM E308 – Standard Practice for Computing the Colors of Objects by Using the CIE System
• ASTM E3040 – Standard Practice for Evaluation of Instrumental Color Difference with a Gray Scale
• ASTM E299 – Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
• ASTM E300 – Standard Practice for Sampling Industrial Chemicals
• ASTM E2970 – Standard Practice for Specifying Color by the Natural Colour System (NCS)
• ASTM E298 – Standard Test Methods for Assay of Organic Peroxides
• ASTM E291 – Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
• ASTM E2867 – Standard Practice for Estimating Uncertainty of Test Results Derived from Spectrophotometry
• ASTM E284 – Standard Terminology of Appearance
• ASTM E28 – Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
• ASTM E2832 – Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)
• ASTM E2729 – Standard Practice for Rectification of Spectrophotometric Bandpass Differences
• ASTM E2679 – Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
• ASTM E2680 – Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
• ASTM E2664 – Standard Practice for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
• ASTM E2670 – Standard Test Method for Objective Quantification of Dental Plaque Using Digital Still Cameras (Withdrawn 2018)
• ASTM E2630 – Standard Test Method for Luminance Ratio of a Fluorescent Specimen using a Narrow Band Source (Withdrawn 2022)
• ASTM E259 – Standard Practice for Preparation of Pressed Powder White Reflectance Factor Transfer Standards for Hemispherical and Bi-Directional Geometries
• ASTM E258 – Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method (Withdrawn 2019)
• ASTM E2545 – Standard Test Method for Objective Measurement of Gingival Color Using Digital Still Cameras (Withdrawn 2018)
• ASTM E2539 – Standard Test Method for Multiangle Color Measurement of Interference Pigments
• ASTM E2540 – Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle
• ASTM E2501 – Standard Specification for Light Source Products for Inspection of Fluorescent Coatings
• ASTM E2480 – Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method with Multi-Valued Measurands
• ASTM E2466 – Standard Test Method for Colorimetry of Teeth Using Digital Still Camera Technology (Withdrawn 2018)
• ASTM E2469 – Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
• ASTM E2470 – Standard Specification for Polyester Grade Ethylene Glycol
• ASTM E2409 – Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)
• ASTM E2387 – Standard Practice for Goniometric Optical Scatter Measurements
• ASTM E2366 – Standard Test Method for Measurement of Daytime Chromaticity of Pavement Marking Materials Using a Portable Reflection Colorimeter (Withdrawn 2014)
• ASTM E2367 – Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter
• ASTM E2313 – Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
• ASTM E2301 – Standard Test Method for Daytime Colorimetric Properties of Fluorescent Retroreflective Sheeting and Marking Materials for High Visibility Traffic Control and Personal Safety Applications Using 45°:Normal Geometry
• ASTM E2302 – Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer
• ASTM E222 – Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
• ASTM E2222 – Standard Practice for Host Computer Communication with Spectrometers for Color Measurements (Withdrawn 2012)
• ASTM E223 – Standard Test Methods for Analysis of Sulfuric Acid
• ASTM E224 – Standard Test Methods for Analysis of Hydrochloric Acid
• ASTM E2214 – Standard Practice for Specifying and Verifying the Performance of Color-Measuring Instruments
• ASTM E2193 – Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
• ASTM E2194 – Standard Test Method for Multiangle Color Measurement of Metal Flake Pigmented Materials
• ASTM E2176 – Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-Rain) (Withdrawn 2013)
• ASTM E2177 – Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings using the Bucket Method in a Condition of Wet Recovery
• ASTM E2175 – Standard Practice for Specifying the Geometry of Multiangle Spectrophotometers
• ASTM E2152 – Standard Practice for Computing the Colors of Fluorescent Objects from Bispectral Photometric Data
• ASTM E2153 – Standard Practice for Obtaining Bispectral Photometric Data for Evaluation of Fluorescent Color
• ASTM E2072 – Standard Specification for Photoluminescent (Phosphorescent) Safety Markings
• ASTM E2073 – Standard Test Method for Photopic Luminance of Photoluminescent (Phosphorescent) Markings
• ASTM E202 – Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
• ASTM E2022 – Standard Practice for Calculation of Weighting Factors for Tristimulus Integration

12Next