Skip to content
Kikaku Master LogoKikaku Master LogoKikaku Master Logo
  • Home
  • FSC
  • AIA
    • List of AIA/NAS
  • ASME
    • ASME Boiler and Pressure Vessel Code
  • ASTM
    • ASTM Annual Book
    • List of ASTM
  • SAE
    • List of SAE
  • Your Favorite
  • Contact Us
  • English
    • 日本語

List of Petroleum Standards

378 standards

American National Standards Institute Inc.

  • ASTM D2619 – Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

  • ASTM D1264 – Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

  • ASTM D2270 – Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C

  • ASTM D445 – Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

  • ASTM D1655 – Standard Specification for Aviation Turbine Fuels

  • ASTM D975 – Standard Specification for Diesel Fuel

  • ASTM PS121 – Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels

  • ASTM F118 – Standard Definitions of Terms Relating to Gaskets (Withdrawn 2022)

  • ASTM E2412 – Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

  • ASTM D97 – Standard Test Method for Pour Point of Petroleum Products

  • ASTM D972 – Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

  • ASTM D974 – Standard Test Method for Acid and Base Number by Color-Indicator Titration

  • ASTM D976 – Standard Test Method for Calculated Cetane Index of Distillate Fuels

  • ASTM D943 – Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

  • ASTM D95 – Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

  • ASTM D937 – Standard Test Method for Cone Penetration of Petrolatum

  • ASTM D938 – Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum

  • ASTM D94 – Standard Test Methods for Saponification Number of Petroleum Products

  • ASTM D942 – Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method

  • ASTM D909 – Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline

  • ASTM D91 – Standard Test Method for Precipitation Number of Lubricating Oils

  • ASTM D910 – Standard Specification for Leaded Aviation Gasolines

  • ASTM D92 – Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

  • ASTM D93 – Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

  • ASTM D892 – Standard Test Method for Foaming Characteristics of Lubricating Oils

  • ASTM D893 – Standard Test Method for Insolubles in Used Lubricating Oils

  • ASTM D86 – Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

  • ASTM D87 – Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

  • ASTM D873 – Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

  • ASTM D874 – Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

  • ASTM D8473 – Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14

  • ASTM D8434 – Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive

  • ASTM D8470 – Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems

  • ASTM D8412 – Standard Guide for Quantification of Microbial Contamination in Liquid Fuels and Fuel-Associated Water by Quantitative Polymerase Chain Reaction (qPCR)

  • ASTM D8420 – Standard Test Method for Wax Appearance Temperature and Wax Disappearance Temperature of Petroleum Products and Liquid Fuels

  • ASTM D8428 – Standard Guide for Establishing Analyst Competence to Perform a Test Method

  • ASTM D8383 – Standard Test Method for Methyl Hydrogen Content of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

  • ASTM D8385 – Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique

  • ASTM D8386 – Standard Test Method for Determining Enhanced Filter Blocking Tendency (EFBT)

  • ASTM D8396 – Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36 °C and 343 °C by Flow Modulated GCxGC – FID

  • ASTM D8356 – Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio

  • ASTM D8368 – Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

  • ASTM D8369 – Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)

  • ASTM D8377 – Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt

  • ASTM D8340 – Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems

  • ASTM D8350 – Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine

  • ASTM D8351 – Standard Test Method for Determination of Trace Elements in Biodiesel and Biodiesel Blends by Microwave Plasma Atomic Emission Spectrometry (MP-AES)

  • ASTM D8324 – Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit

  • ASTM D8325 – Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements

  • ASTM D8302 – Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography

  • ASTM D8304 – Standard Test Method for Determination of Compounded Forms of Iron in In-service Fluids

  • ASTM D8305 – Standard Test Method for The Determination of Total Aromatic Hydrocarbons and Total Polynuclear Aromatic Hydrocarbons in Aviation Turbine Fuels and other Kerosene Range Fuels by Supercritical Fluid Chromatography

  • ASTM D8315 – Standard Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry

  • ASTM D8316 – Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine

  • ASTM D8321 – Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements

  • ASTM D8322 – Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)

  • ASTM D8323 – Standard Guide for Management of In-Service Phosphate Ester-based Fluids for Steam Turbine Electro-Hydraulic Control (EHC) Systems

  • ASTM D8278 – Standard Specification for Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants

  • ASTM D8279 – Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine

  • ASTM D8288 – Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine

  • ASTM D8289 – Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite

  • ASTM D8290 – Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy

  • ASTM D8291 – Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine

  • ASTM D8275 – Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines

  • ASTM D8276 – Standard Test Method for Hydrocarbon Types in Middle Distillates, including Biodiesel Blends by Gas Chromatography/Mass Spectrometry

  • ASTM D8277 – Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique

  • ASTM D8252 – Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry

  • ASTM D8253 – Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy

  • ASTM D8254 – Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester

  • ASTM D8255 – Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens

  • ASTM D8256 – Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

  • ASTM D8267 – Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

  • ASTM D8274 – Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer

  • ASTM D8226 – Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine

  • ASTM D8227 – Standard Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

  • ASTM D8235 – Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

  • ASTM D8236 – Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis

  • ASTM D8210 – Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer

  • ASTM D8211 – Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface

  • ASTM D8188 – Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)

  • ASTM D8189 – Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)

  • ASTM D8194 – Standard Practice for Evaluation of Suitability of 37 mm Filter Monitors and 47 mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels

  • ASTM D8206 – Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT)

  • ASTM D8166 – Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors

  • ASTM D8181 – Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils

  • ASTM D8182 – Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)

  • ASTM D8183 – Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method

  • ASTM D8184 – Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument

  • ASTM D8185 – Standard Guide for In-Service Lubricant Viscosity Measurement

  • ASTM D8186 – Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)

  • ASTM D8148 – Standard Test Method for Spectroscopic Determination of Haze in Fuels

  • ASTM D8149 – Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants

  • ASTM D8150 – Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography

  • ASTM D8164 – Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing

  • ASTM D8165 – Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions

  • ASTM D8147 – Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines

  • ASTM D8127 – Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants

  • ASTM D8128 – Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings

  • ASTM D8144 – Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography

  • ASTM D8145 – Standard Practice for Sampling of Green Petroleum Coke

12Next
Kikaku Master LogoKikaku Master LogoKikaku Master Logo

KikakuMaster's goal is to be an insightful source and community for industrial specifications and standards to help engineers.

We see challenges with locating, searching and sharing engineering specs, standards and knowledge.

We began developing a website where engineers could discuss, debate and share their knowledge of various specs and standards.

  • AIA/NAS
  • ASTM
  • AWS

  • ISO

  • SAE

  • Contact Us
  • Latest News
1375 - Demolition Materials (549) 1377 - Cartridge and Propellant Actuated Devices and Components (524) 4720 - Hose and Flexible Tubing (552) 4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings (1823) 5120 - Hand Tools, Nonedged, Nonpowered (1124) 5305 - Screws (781) 5306 - Bolts (996) 5310 - Nuts and Washers (864) 5330 - Packing and Gasket Materials (583) 5340 - Hardware, Commercial (953) 5905 - Resistor (753) 5910 - Capacitors (783) 5930 - Switches (1012) 5935 - Connectors, Electrical (4357) 5940 - Lugs, Terminals, and Terminal Strips (564) 5945 - Relays and Solenoids (733) 5950 - Coils and Transformers (856) 5960 - Electron Tubes and Associated Hardware (1630) 5961 - Semiconductor Devices and Associated Hardware (707) 6145 - Wire and Cable, Electrical (1629) 6240 - Electric Lamps (662) 6505 - Drugs and Biologicals (1343) 6515 - Medical and Surgical Instruments, Equipment, and Supplies (1907) 6520 - Dental Instruments, Equipment, and Supplies (790) 6530 - Hospital Furniture, Equipment, Utensils, and Supplies (745) 6610 - Flight Instruments (540) 6625 - Electrical and Electronic Properties Measuring and Testing Instruments (1241) 6640 - Laboratory Equipment and Supplies (1187) 6810 - Chemicals (1114) 8010 - Paints, Dopes, Varnishes, and Related Products (2046) 8030 - Preservative and Sealing Compounds (554) 8140 - Ammunition and Nuclear Ordnance Boxes, Packages and Special Containers (797) 8305 - Textile Fabrics (910) 8415 - Clothing, Special Purpose (660) 8455 - Badges and Insignia (3093) 8915 - Fruits and Vegetables (531) 9330 - Plastics Fabricated Materials (759) FACR (1647) ISDA (1776) ISDD (786) ISDF (1827) ISDN (581) MISC (1045) PACK (539) SESS (581)

© All rights reserved. • kikakumaster.com

Page load link
Go to Top