Skip to content
Toggle Navigation
Home
FSC
AIA
List of AIA/NAS
ASME
ASME Boiler and Pressure Vessel Code
ASTM
ASTM Annual Book
List of ASTM
SAE
List of SAE
Your Favorite
Contact Us
English
日本語
Search for:
List of 8010 - Paints, Dopes, Varnishes, and Related Products Standards
2046 standards
SSPC-VIS2 – Standard Method of Evaluating Degree of Rusting on Painted Steel Surfaces
SSPC-VIS1 – Visual Standard for Abrasive Blast Cleaned Steel (Standard Reference Photographs) Guide to SSPC-VIS1
SSPC-SPCOM – Surface Preparation Commentary for Steel and Concrete Substrates
SSPC-SP17 – Thorough Abrasive Blast Cleaning of Non-Ferrous Metals
SSPC-SP10 – Near-White Blast Cleaning, Surface Preparation Specification No. 10
SSPC-SP8 – Pickling
SSPC-SP7 – Brush-Off Blast Cleaning, Surface Preparation Specification No. 7
SSPC-SP6 – Commercial Blast Cleaning, Surface Preparation Specification No.
SSPC-SP5 – White Metal Blast Cleaning, Surface Preparation Specification No. 5
SSPC-SP3 – Power Tool Cleaning, Surface Preparation Specification No. 3
SSPC-SP2 – Hand Tool Cleaning
SSPC-SP1 – Solvent Cleaning
SSPC-PS14.01 – Painting System Specification No. 14.01, Steel Joist Shop Painting System (No S/S Document)
SSPC-PS13.01 – Painting System Specification Number 13.01, Epoxy-Polyamide Painting System
SSPC-PS12.01 – Painting System One-Coat Zinc-Rich Painting System Specification Number 12.01
SSPC-PS11.01 – Painting System Black (or Dark Red) Coal Tar Epoxy-Polyamide Painting System Specification No. 11.01
SSPC-PS10.01 – Painting System Specification Number 10.01, Hot Applied Coal Tar Enamel Painting System
SSPC-PS4.01 – PAINTING SYSTEM SPECIFICATION NO. 4.02, FOUR-COAT VINYL PAINTING SYSTEM (FOR FRESH WATER, CHEMICAL, & CORROSIVE ATMOSPHERES) (NO S/S DOCUMENT)
SSPC-PS1.09 – Three-Coat Oil Base Zinc Oxide Painting System (without Lead or Chromate Pigment) (No S/S Document)
SSPC-PAINT101 – Aluminum Alkyd Paint Leafing (Type I) and Non-Leafing (Type II)
SSPC-PAINT30 – Weld-Through Inorganic Zinc Primer
SSPC-PAINT27 – Basic Zinc Chromate-Vinyl Butyral Wash Primer Paint Specification No. 27
SSPC-PAINT22 – Epoxy-Polymide Paints (Primer, Intermediate, and Topcoated) Paint Specification No. 22 (No S/S Document)
SSPC-PAINT20 – Paint Specification No. 20, Zinc-Rich Primers (Type I, Inorganic and Type II Organic)
SSPC-PAINT16 – Paint Specification Number 16, Coal Tar Epoxy-Polyamide Black (or Dark Red) Paint
SSPC-PAINT15 – Paint Specification Number 15, Steel Joist Shop Paint Type I, Red Oxide Paint Type II, Asphalt Coating
SSPC-PAINT13 – RED OR BROWN ONE-COAT SHOP PAINT (NO S/S DOCUMENT)
SSPC-PAINT11 – Paint Specification No. 11, Red Iron Oxide, Zinc Chromate, Raw Linseed Oil and Alkyd Primer (No S/S Document)
SSPC-PAINT9 – Paint Specification Number 9, White (or Colored) Vinyl Paint
SSPC-PAINT8 – Paint Specification Number 8, Aluminum Vinyl Paint”,
SSPC-PAINT5 – Zinc Dust, Zinc Oxide, and Phenolic Varnish Paint (No S/S Document)
SSPC-PAINT2 – RED LEAD, IRON OXIDE, RAW LINSEED OIL AND ALKYD PRIMER (NO S/S DOCUMENT)
SSPC-PAINT1 – RED LEAD AND RAW LINSEED OIL PRIMER (NO S/S DOCUMENT)
SSPC-PA4 – GUIDE TO MAINTENANCE REPAINTING WITH OIL BASED OR ALKYD PAINTING SYSTEMS PAINT APPLICATION GUIDE NO. 4 (NO S/S DOCUMENT)
SSPC-PA3 – GUIDE TO SAFETY IN PAINT APPLICATION PAINT APPLICATION GUIDE NO. 3 (NO S/S DOCUMENT)
SSPC-PA2 – Paint Application Specification Number 2, Measurement of Dry Paint Thickness with Magnetic Gages
SSPC-PA1 – Paint Application Specification Number 1, Shop, Field and Maintenance Painting
SAE-J1545 – Finishes, Exterior, Textiles, and Colored Trim, Instrumental Color Difference Measurement for
SAE-AMS-STD-595 – Colors Used in Government Procurement
SAE-AMS-C-83445 – Coating System, Polyurethane, Nonyellowing, White, Rain Erosion Resistant Thermally Reflective
SAE-AMS-C-83231 – Coatings, Polyurethane, Rain Erosion Resistant for Exterior Aircraft and Missile Plastic Parts
SAE-AMS-R-81835 – Remover, Organic Coating, Hot Tank Type
SAE-AMS-T-23397 – Tapes, Pressure Sensitive Adhesive, For Masking During Paint Stripping Operations
SAE-AMS-P-21600 – Paint System, Fluorescent, Removable, For Aircraft Application
SAE-AMS3721 – Tape for Organic Coatings Adhesion Testing
SAE-AMS3697 – Aerodynamic Fairing Compound -55 Deg. to +150 Deg. C (-65 Deg. to +300 Deg. F)
SAE-AMS3696 – Aerodynamic Fairing Compound -55 Deg. to +85 Deg. C (-65 Deg. to +185 Deg. F)
SAE-AMS3181 – MATERIAL, COATING, FLUOROCARBON (FKM), ELASTOMERIC, RAIN-EROSION RESISTANT BLACK (NO S/S DOCUMENT)
SAE-AMS3138/4 – Material, Coating, Fluorocarbon (FKM), Elastomeric, Anti-Static Topcoating, Black (S/S by SAE-AMS3138)
SAE-AMS3138/2 – Material, Coating, Fluorocarbon (FKM), Elastomeric, Rain-Erosion and Thermal-Flash Resistant, White (S/S by SAE-AMS3138)
SAE-AMS3138/1 – Material, Coating, Fluorocarbon (FKM), Elastomeric, Rain-Erosion Resistant Black (S/S by SAE-AMS3138)
SAE-AMS3138 – Materials, Coating, Fluorocarbon (FKM), Elastomeric
SAE-AMS3135 – Coating Material, Silicone Resin 205 Deg. C (400 Deg. F) Cure
SAE-AMS2481 – Phosphate Treatment Antichafing
AWWA-D102 – Tanks, Steel Water-Storage Painting for
AWWA-C550 – Protective Epoxy Interior Coatings for Valves and Hydrants
AWWA-C213 – Epoxy Coating, Fusion-Bonded, for the Interior & Exterior of Steel Water Pipelines
AWWA-C210 – Pipelines, Steel Water Epoxy Coating Systems for the Interior and Exterior of
AWWA-C203 – Pipelines, Steel Water Coal-Tar Protective Coating and Lining for Enamel and Tape-Hot Applied
ASTM-G7/G7M – Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials
ASTM-G7 – Materials, Nonmetallic, Atmospheric Environmental Exposure Testing of
ASTM-F941 – Marine Surface Preparation and Coating Application, Inspection of, Standard Practice for
ASTM-F940 – Coatings (Paint), Protective, Use in Marine Construction and Shipbuilding , Quality Control Receipt Inspection Procedures, Standard Practice for
ASTM-F718 – Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet
ASTM-E308 – System, CIE, Computing the Colors of Objects by Using the
ASTM-E299 – Solvents, Organic, Trace Amounts of Peroxides in, Standard Test Method for
ASTM-E97 – SPECIMENS, OPAQUE, BY BROAD-BAND FILTER REFLECTOMETRY, DIRECTIONAL REFLECTANCE, 45-DEG 0-DEG OF, STANDARD TEST METHOD FOR (S/S BY ASTM-E1347)
ASTM-E28 – Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus
ASTM-D7091 – Film, Dry, Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals, Nondestructive Measurement of
ASTM-D4400 – Paints Using a Multinotch Applicator, Sag Resistance of
ASTM-D4287 – Viscometer, High-Shear Viscosity Using a Cone/Plate
ASTM-D4060 – Coatings, Organic, by the Taber Abraser, Abrasion Resistance of
ASTM-D4017 – Water in Paints and Paint Materials by Karl Fischer Method
ASTM-D3960 – Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
ASTM-D3925 – Paints and Related Pigmented Coatings, Sampling Liquid
ASTM-D3924 – Paint, Varnish, Lacquer, and Related Materials, Conditioning and Testing, Standard Environment for
ASTM-D3792 – Water Content of Coatings by Direct Injection into a Gas Chromatoghraph
ASTM-D3732 – Coatings, Ultraviolet-Cured, Reporting Cure Times of
ASTM-D3725 – Semiquantitative Determination of Fish Oil in Drying Oils and Drying Oil Fatty Acids by Gas-Liquid Chromatography (No S/S Document)
ASTM-D3718 – Paint, Chromium in, by Atomic Absorption Spectroscopy, Low Concentrations of
ASTM-D3624 – Mercury in Paint by Atomic Absorption Spectroscopy, Low Concentrations of
ASTM-D3623 – Panels, Antifouling, in Shallow Submergence
ASTM-D3539 – Liquids, Rates of Volatile Evaporation by Shell, Thin-Film Evaporometer (No S/S Document)
ASTM-D3450 – Coatings, Interior Architectural, Washability Properties of
ASTM-D3432 – Solutions By Gas Chromatography, Unreacted Toluene Diisocyantes in Urethane Prepolymers and Coating
ASTM-D3363 – Film Hardness by Pencil Test
ASTM-D3335 – Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy, Low Concentrations of
ASTM-D3274 – Degree, Evaluating, of Surface Disfigurement of Paint Films by Fungal or Algal Growth or Soil and Dirt Accumulation
ASTM-D3273 – Mold, Resistance to Growth of, on the Surface of Interior Coatings in an Environmental Chamber
ASTM-D3272 – Vacuum Distillation of Solvents from Solvent-Reducible Paints for Analysis (No S/S Document)
ASTM-D3271 – Paints, Solvent-Reducible, into a Gas Chormatograph for Solvent Analysis, Direct Injection of
ASTM-D3170 – Coatings, Chipping Resistance of
ASTM-D3168 – Polymers in Emulsion Paints, Qualitative Identification of
ASTM-D3056 – Varnishes, Solventless, Gel Time of
ASTM-D2805 – Paints by Reflectometry, Hiding Power of
ASTM-D2801 – PAINTS BY DRAWN-DOWN METHOD, STANDARD TEST METHOD FOR LEVELING CHARACTERISTICS OF (NO S/S DOCUMENT)
ASTM-D2800 – Preparation of Methyl Esters from Oils for Determination of Fatty Acid Composition by Gas-Liquid Chromatography (No S/S Document)
ASTM-D2794 – Deformation, Rapid, Resistance of Organic Coatings to the Effects of (Impact)
ASTM-D2698 – Paints by High-Speed Centrifuging, Determination of the Pigment Content of Solvent-Reducible
ASTM-D2697 – Volume Nonvolatile Matter in Clear or Pigmented Coatings
1
2
Next
Page load link
Go to Top