List of Rubber Standards

• ASTM D2414 – Standard Test Method for Carbon Black—Oil Absorption Number (OAN)
• ASTM D6319 – Standard Specification for Nitrile Examination Gloves for Medical Application
• ASTM D2240 – Standard Test Method for Rubber Property—Durometer Hardness
• ASTM D395 – Standard Test Methods for Rubber Property—Compression Set
• ASTM D412 – Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
• ASTM D471 – Standard Test Method for Rubber Property—Effect of Liquids
• ASTM D5964 – Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, ASTM No. 3 Oils, and IRM 905 formerly ASTM No. 5 Oil
• ASTM F868 – Standard Classification for Laminated Composite Gasket Materials
• ASTM F870 – Standard Practice for Tread Footprints of Passenger Car Tires Groove Area Fraction and Dimensional Measurements
• ASTM F811 – Standard Practice for Accelerometer Use in Vehicles for Tire Testing
• ASTM F806 – Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials
• ASTM F762/F762M – Standard Test Method for Determining Change in Groove (or Void) Depth With Distance Traveled for Passenger Car Tires
• ASTM F724 – Standard Test Method for Outdoor Evaluation of Tire Sidewall Component Cracking Resistance
• ASTM F607 – Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
• ASTM F623 – Standard Performance Specification for Foley Catheter
• ASTM F559 – Standard Test Method for Measuring Length of Road Test Courses Using a Fifth Wheel
• ASTM F538 – Standard Terminology Relating to Characteristics and Performance of Tires
• ASTM F551/F551M – Standard Practice for Using a 1.707-m [67.23-in.] Diameter Laboratory Test Roadwheel in Testing Tires
• ASTM F551 – Standard Practice for Using a 67.23-in. (1.707-m) Diameter Laboratory Test Roadwheel in Testing Tires (Withdrawn 2009)
• ASTM F495 – Standard Test Method for Weight Loss of Gasket Materials Upon Exposure to Elevated Temperatures
• ASTM F457 – Standard Test Method for Speed and Distance Calibration of Fifth Wheel Equipped With Either Analog or Digital Instrumentation
• ASTM F408 – Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using a Towed Trailer
• ASTM F414 – Standard Test Method for Energy Absorbed by a Tire When Deformed by Slow-Moving Plunger
• ASTM F421 – Standard Test Method for Measuring Groove and Void Depth in Passenger Car Tires
• ASTM F424 – Standard Test Method for Tires for Wet Driving Traction in Straight-Ahead Motion Using Highway Vehicles (Withdrawn 2006)
• ASTM F433 – Standard Practice for Evaluating Thermal Conductivity of Gasket Materials
• ASTM F434 – Standard Test Method for Blow-Out Testing of Preformed Gaskets
• ASTM F38 – Standard Test Methods for Creep Relaxation of a Gasket Material
• ASTM F403 – Standard Test Method for Tires for Wet Traction in Straight-Ahead Braking, Using Highway Vehicles (Withdrawn 2007)
• ASTM F377 – Standard Practice for Calibration of Braking/Tractive Measuring Devices for Testing Tires
• ASTM F3611 – Standard Specification for P225/60R16 97S Radial Low Tread Depth Standard Reference Test Tire
• ASTM F36 – Standard Test Method for Compressibility and Recovery of Gasket Materials
• ASTM F363 – Standard Test Method for Corrosion Testing of Gaskets
• ASTM F37 – Standard Test Methods for Sealability of Gasket Materials
• ASTM F336 – Standard Practice for Design and Construction of Nonmetallic Enveloped Gaskets for Corrosive Service
• ASTM F3270/F3270M – Standard Practice for Compression versus Load Properties of Gasket Materials
• ASTM F3149 – Standard Practice for Determining the Maintenance Factor (m) and Yield Factor (y) Loading Constants Applicable to Gasket Materials and Designs
• ASTM F3015 – Standard Test Method for Accelerated Laboratory Roadwheel Generation of Belt Separation in Radial Passenger Car and Light Truck Tires through Load Range E
• ASTM F2869 – Standard Practice for Radial Light Truck Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Rotating Roadwheel and a Flat Surface
• ASTM F2870 – Standard Specification for 315/70R22.5 154/150L Radial Truck Standard Reference Test Tire
• ASTM F2871 – Standard Specification for 245/70R19.5 136/134M Radial Truck Standard Reference Test Tire
• ASTM F2872 – Standard Specification for 225/75R16C 116/114S M+S Radial Light Truck Standard Reference Test Tire
• ASTM F2836 – Standard Practice for Gasket Constants for Bolted Joint Design
• ASTM F2837 – Standard Test Method for Hot Compression Properties of Gasket Materials
• ASTM F2838 – Standard Practice for Accelerated Laboratory Aging of Radial Passenger Car and Light Truck Tires through Load Range E for the Laboratory Generation of Belt Separation
• ASTM F2803 – Standard Test Method for Evaluating Rim Slip Performance of Tires and Wheels
• ASTM F2779 – Standard Practice for Commercial Radial Truck-Bus Tires to Establish Equivalent Test Severity Between a 1.707-m (67.23-in.) Diameter Roadwheel and a Flat Surface
• ASTM F2716 – Standard Practice for Comparison of Nonmetallic Flat Gaskets in High Pressure Saturated Steam
• ASTM F2663 – Standard Test Method for Bead Unseating of Tubeless Passenger and Light Truck Tires
• ASTM F2523 – Standard Practice for Blowout Resistance of Room-Temperature Vulcanized Elastomers
• ASTM F2524 – Standard Practice for Determination of Volatile Content for Formed-in-Place Gaskets (FIPG) Silicone Adhesives and Sealants for Transportation Applications
• ASTM F2467 – Standard Practice for Measuring Static Sealing Pressure Using Pressure-Indicating Film (PIF) in Transportation Applications
• ASTM F2468 – Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications
• ASTM F2493 – Standard Specification for P225/60R16 97S Radial Standard Reference Test Tire
• ASTM F2466 – Standard Practice for Determining Silicone Volatiles in Silicone Rubber for Transportation Applications
• ASTM F2378 – Standard Test Method for Sealability of Sheet, Composite, and Solid Form-in-Place Gasket Materials
• ASTM F2325 – Standard Classification for Multi-Layer Steel (MLS) and Other Metal Layer Gaskets for Transportation Applications
• ASTM F1971 – Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
• ASTM F1922 – Standard Test Method for Tires, Pneumatic, Vehicular, Highway
• ASTM F1923 – Standard Test Method for Tires, Pneumatic, Low Speed, Off Highway
• ASTM F1909 – Standard Specification for Preformed Open–Cell Sponge Rubber Pail and Drum Gaskets
• ASTM F1805 – Standard Test Method for Single Wheel Driving Traction in a Straight Line on Snow- and Ice-Covered Surfaces
• ASTM F1806 – Standard Practice for Tire Testing Operations–Basic Concepts and Terminology for Reference Tire Use
• ASTM F1649 – Standard Test Methods for Evaluating Wet Braking Traction Performance of Passenger Car Tires on Vehicles Equipped with Anti-Lock Braking Systems
• ASTM F1650 – Standard Practice for Evaluating Tire Traction Performance Data Under Varying Test Conditions
• ASTM F1572 – Standard Test Methods for Tire Performance Testing on Snow and Ice Surfaces
• ASTM F1574 – Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures
• ASTM F152 – Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials
• ASTM F1502 – Standard Test Method for Static Measurements on Tires for Passenger Cars, Light Trucks, and Medium Duty Vehicles
• ASTM F147 – Standard Test Method for Flexibility of Non-Metallic Gasket Materials
• ASTM F148 – Standard Test Method for Binder Durability of Cork Composition Gasket Materials
• ASTM F145 – Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies
• ASTM F146 – Standard Test Methods for Fluid Resistance of Gasket Materials
• ASTM F1426 – Standard Practice for Identifying Tire Tread Surface Irregular Wear Patterns Resulting from Tire Use
• ASTM F1364 – Standard Practice for Use of a Calibration Device to Demonstrate the Inspection Capability of an Interferometric Laser Imaging Nondestructive Tire Inspection System
• ASTM F1315 – Standard Test Method for Density of a Sheet Gasket Material
• ASTM F1277 – Standard Test Method for Determination of Leachable Chloride in Packing and Gasketing Materials by Ion-Selective Electrode Technique (Withdrawn 2018)
• ASTM F1276 – Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials
• ASTM F118 – Standard Definitions of Terms Relating to Gaskets (Withdrawn 2022)
• ASTM F1112 – Standard Test Method for Static Testing of Tubeless Pneumatic Tires for Rate of Loss of Inflation Pressure
• ASTM F112 – Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F1087 – Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture
• ASTM F1082 – Standard Practice for Tires-Determining Precision for Test Method Standards (Withdrawn 2006)
• ASTM F104 – Standard Classification System for Nonmetallic Gasket Materials
• ASTM F1046 – Standard Guide for Preparing Artificially Worn Passenger and Light Truck Tires for Testing
• ASTM F1016 – Standard Practice for Linear Tire Treadwear Data Analysis
• ASTM F1035 – Standard Practice for Use of Rubber-Cord Pie Disk to Demonstrate the Discernment Capability of a Tire X-ray Imaging System
• ASTM E1136 – Standard Specification for P195/75R14 Radial Standard Reference Test Tire
• ASTM D991 – Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products
• ASTM D945 – Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)
• ASTM D925 – Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)
• ASTM D926 – Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)
• ASTM D865 – Standard Test Method for Rubber—Deterioration by Heating in Air (Test Tube Enclosure)
• ASTM D8471 – Standard Practice for Silica—Reference Compound
• ASTM D8411 – Standard Test Method for Rubber Compounding Materials—Determination of 2-Mercaptobenzothiazole (MBT) in Rubber
• ASTM D8419 – Standard Specification for Anesthesia Reservoir Bags
• ASTM D8389 – Standard Performance Specification for Urinary Intermittent Catheters
• ASTM D8362 – Standard Test Method for Rubber—Determination of the Degree of Silanization by Dynamic Strain Softening
• ASTM D8363 – Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
• ASTM D8371 – Standard Test Method for Trace Metal Content Analysis in Carbon Black

12Next