List of Building Standards

• ASTM E1155M – Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric)
• ASTM E1155 – Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
• ASTM PS138 – Provisional Standard Specification for Shelter, Electrical Equipment, Lightweight (Withdrawn 2004)
• ASTM F842 – Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
• ASTM F588 – Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
• ASTM F3296 – Standard Practice for Commercial Application of Electric Security Fences
• ASTM F3297 – Standard Practice for Corrections Application for Non-Lethal Electric Security Fences
• ASTM F3277 – Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities
• ASTM F3217 – Standard Guide for Security Fasteners
• ASTM F2956 – Standard Test Methods for Anchor Systems Used for Detention Hollow Metal Systems
• ASTM F2697 – Standard Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities
• ASTM F2542 – Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
• ASTM F2322 – Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
• ASTM F1916 – Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications (Withdrawn 2008)
• ASTM F1915 – Standard Test Methods for Glazing for Detention Facilities
• ASTM F1870 – Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
• ASTM F1758 – Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
• ASTM F1643 – Standard Test Methods for Detention Sliding Door Locking Device Assembly
• ASTM F1592 – Standard Test Methods for Detention Hollow Metal Vision Systems
• ASTM F1577 – Standard Test Methods for Detention Locks for Swinging Doors
• ASTM F1550 – Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimet
• ASTM F1534 – Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
• ASTM F1450 – Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
• ASTM F1465 – Standard Guide for Selection of Security Control Systems (Withdrawn 2012)
• ASTM E997 – Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
• ASTM E998 – Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads
• ASTM E985 – Standard Specification for Permanent Metal Railing Systems and Rails for Buildings (Withdrawn 2015)
• ASTM E987 – Standard Test Methods for Deglazing Force of Fenestration Products
• ASTM E989 – Standard Classification for Determination of Single-Number Metrics for Impact Noise
• ASTM E990 – Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
• ASTM E964 – Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
• ASTM E966 – Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements
• ASTM E935 – Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
• ASTM E937/E937M – Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
• ASTM E90 – Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
• ASTM E917 – Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
• ASTM E874 – Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
• ASTM E894 – Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
• ASTM E859/E859M – Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
• ASTM E864 – Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
• ASTM E865 – Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
• ASTM E866 – Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
• ASTM E833 – Standard Terminology of Building Economics
• ASTM E835/E835M – Standard Guide for Modular Coordination of Clay and Concrete Masonry Units (Withdrawn 2011)
• ASTM E779 – Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
• ASTM E783 – Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
• ASTM E795 – Standard Practices for Mounting Test Specimens During Sound Absorption Tests
• ASTM E774 – Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units (Withdrawn 2006)
• ASTM E754 – Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
• ASTM E756 – Standard Test Method for Measuring Vibration-Damping Properties of Materials
• ASTM E759/E759M – Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
• ASTM E760/E760M – Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
• ASTM E761/E761M – Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
• ASTM E767 – Standard Test Method for Shear Strength Properties of Metal Connector Plates (Withdrawn 2005)
• ASTM E773 – Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units (Withdrawn 2010)
• ASTM E73 – Standard Practice for Static Load Testing of Truss Assemblies
• ASTM E736/E736M – Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
• ASTM E741 – Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
• ASTM E713 – Standard Guide for Selection of Scales for Metric Building Drawings (Withdrawn 2010)
• ASTM E717 – Standard Guide for Preparation of the Accreditation Annex of Acoustical Test Standards (Withdrawn 2008)
• ASTM E72 – Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
• ASTM E695 – Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
• ASTM E661 – Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
• ASTM E631 – Standard Terminology of Building Constructions
• ASTM E605/E605M – Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
• ASTM E621 – Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380) (Withdrawn 2008)
• ASTM E575 – Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
• ASTM E576 – Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
• ASTM E577 – Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems (Withdrawn 2011)
• ASTM E580/E580M – Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
• ASTM E596 – Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
• ASTM E546 – Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
• ASTM E547 – Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
• ASTM E557 – Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
• ASTM E564 – Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
• ASTM E529 – Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
• ASTM E492 – Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
• ASTM E497 – Standard Practice for Installing Sound-Isolating Lightweight Partitions (Withdrawn 2008)
• ASTM E488/E488M – Standard Test Methods for Strength of Anchors in Concrete Elements
• ASTM E489 – Standard Test Method for Tensile Strength Properties of Metal Connector Plates (Withdrawn 2005)
• ASTM E477 – Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
• ASTM E455 – Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
• ASTM E405 – Standard Test Methods for Wear Testing Rotary Operators for Windows
• ASTM E413 – Classification for Rating Sound Insulation
• ASTM E336 – Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
• ASTM E330/E330M – Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
• ASTM E331 – Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
• ASTM E3222 – Standard Classification for Determination of High-frequency Impact Sound Ratings
• ASTM E3223/E3223M – Standard Guide for Specifying and Testing Field-Constructed Exterior Building Wall System Mockups in New Construction
• ASTM E3203 – Standard Test Method for Determination of Lead in Dried Paint, Soil, and Wipe Samples by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)
• ASTM E3207 – Standard Classification for Determination of Low-Frequency Impact Noise Ratings
• ASTM E3193 – Standard Test Method for Measurement of Lead (Pb) in Dust by Wipe, Paint, and Soil by Flame Atomic Absorption Spectrophotometry (FAAS)
• ASTM E3157 – Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems
• ASTM E3158 – Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building
• ASTM E3130 – Standard Guide for Developing Cost-Effective Community Resilience Strategies
• ASTM E3133 – Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine
• ASTM E3118/E3118M – Standard Test Methods to Evaluate Seismic Performance of Suspended Ceiling Systems by Full-Scale Dynamic Testing
• ASTM E3119 – Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing
• ASTM E3120 – Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings
• ASTM E3121/E3121M – Standard Test Methods for Field Testing of Anchors in Concrete or Masonry

12Next