Skip to content
Kikaku Master LogoKikaku Master LogoKikaku Master Logo
  • Home
  • FSC
  • AIA
    • List of AIA/NAS
  • ASME
    • ASME Boiler and Pressure Vessel Code
  • ASTM
    • ASTM Annual Book
    • List of ASTM
  • SAE
    • List of SAE
  • Your Favorite
  • Contact Us
  • English
    • 日本語

List of Geotechnical Engineering Standards

217 standards

American National Standards Institute Inc.

  • ASTM E850 – Standard Guide for Characterization of Inorganic Process Wastes for Use as Structural Fill (Withdrawn 2019)

  • ASTM E1553 – Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002)

  • ASTM E1370 – Standard Guide for Air Sampling Strategies for Worker and Workplace Protection

  • ASTM D854 – Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer

  • ASTM D8460 – Standard Test Method for Quantification of Volatile Organic Compounds Using Proton Transfer Reaction Mass Spectrometry

  • ASTM D8462 – Standard Test Method for Cyclic Plate Load Tests to Evaluate the Structural Performance of Roadway Test Sections with Geosynthetics

  • ASTM D8408/D8408M – Standard Guide for Development of Long-Term Monitoring Plans for Vapor Mitigation Systems

  • ASTM D8427 – Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sheet Piling

  • ASTM D8404 – Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids

  • ASTM D8381/D8381M – Standard Test Methods for Measuring the Depth of Deep Foundations by Parallel Seismic Logging

  • ASTM D8358 – Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter

  • ASTM D8359 – Standard Test Method for Determining the In Situ Rock Deformation Modulus and Other Associated Rock Properties Using a Flexible Volumetric Dilatometer

  • ASTM D8364/D8364M – Standard Specification for Geosynthetic Cementitious Composite Mat (GCCM) Materials

  • ASTM D8326 – Standard Practice for Measurement of the Kinetic Energy of Simulated Rainfall

  • ASTM D8329 – Standard Test Method for Determination of Water/Cementitious Materials Ratio for Geosynthetic Cementitious Composite Mats (GCCMs) and Measurement of the Compression Strength of the Cementitious Material Contained Within

  • ASTM D8344 – Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids

  • ASTM D8297/D8297M – Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Sequential Rainfall-Induced Erosion Using a Tilted Bed Slope

  • ASTM D8298/D8298M – Standard Test Method for Determination of Erosion Control Products (ECP) Performance in Protecting Slopes from Continuous Rainfall-Induced Erosion Using a Tilted Bed Slope

  • ASTM D8299 – Standard Guide for Using Metal Ratios in Soils to Distinguish Between Anthropogenic and Natural Beryllium

  • ASTM D8281/D8281M – Standard Test Method for Determining the Presence of Expanding Clays in Rock for Erosion Control Using Ethylene Glycol

  • ASTM D8295 – Standard Test Method for Determination of Shear Wave Velocity and Initial Shear Modulus in Soil Specimens using Bender Elements

  • ASTM D8296 – Standard Test Method for Consolidated Undrained Cyclic Direct Simple Shear Test under Constant Volume with Load Control or Displacement Control

  • ASTM D8262 – Standard Test Method for Determining the pH of Granular Material for Use in Embankments, Subgrades, and Retaining Wall Backfil

  • ASTM D8265 – Standard Practices for Electrical Methods for Mapping Leaks in Installed Geomembranes

  • ASTM D8269 – Standard Guide for the Use of Geocells in Geotechnical and Roadway Projects

  • ASTM D8249 – Standard Practice for Use of Rotary Kiln Produced Porous Ceramic as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

  • ASTM D8232 – Standard Test Procedures for Measuring the Inclination of Deep Foundations

  • ASTM D8198 – Standard Specification for Hydraulically Applied 100 % Wood Fiber Mulches

  • ASTM D8199 – Standard Test Method for Determining the Specific Strength of Hydraulically Applied Fiber Matrix Products for Erosion Control

  • ASTM D8200 – Standard Practice for Creating a Correlation to Compare Particle Size Distribution Results of Proppants by Dynamic Imaging Analyzers and Sieves

  • ASTM D8202 – Standard Specification for Hydraulically Applied 100% Wheat Straw Fiber Mulches

  • ASTM D8203 – Standard Test Method for Determination of the Horizontal Water Flow Rate of a Geosynthetic Screening Material, Product, or Device

  • ASTM D8204 – Standard Practice for Burial and Retrieval of Samples in a Test Pad to Evaluate Installation Effects on Geosynthetic Clay Liners

  • ASTM D8208 – Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler

  • ASTM D8167/D8167M – Standard Test Method for In-Place Bulk Density of Soil and Soil-Aggregate by a Low-Activity Nuclear Method (Shallow Depth)

  • ASTM D8169/D8169M – Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load

  • ASTM D8170 – Standard Guide for Using Disposable Handheld Soil Core Samplers for the Collection and Storage of Soil for Volatile Organic Analysis

  • ASTM D8172 – Standard Test Method for Shear and Peel Strength of Solvent-Welded Seams with Nonreinforced Geomembranes

  • ASTM D8173 – Standard Guide for Site Preparation, Layout, Installation, and Hydration of Geosynthetic Cementitious Composite Mats

  • ASTM D8152 – Standard Practice for Measuring Field Infiltration Rate and Calculating Field Hydraulic Conductivity Using the Modified Philip Dunne Infiltrometer Test

  • ASTM D8153 – Standard Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe

  • ASTM D8151 – Standard Practice for Obtaining Rainfall Runoff from Unvegetated Rolled and Hydraulic Erosion Control Products (RECPs and HECPs) for Acute Ecotoxicity Testing

  • ASTM D8102 – Standard Practice for Manufacturing Quality Control of Geotextiles

  • ASTM D8105 – Standard Guide for Use and Application of Geosynthetic Reinforcement Reduction Factor Test Results

  • ASTM D8106 – Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay

  • ASTM D8107 – Standard Practice for Determining Sediment Pond Skimmer Flow Rate

  • ASTM D8117 – Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by Differential Scanning Calorimetry

  • ASTM D8121/D8121M – Standard Test Method for Approximating the Shear Strength of Cohesive Soils by the Handheld Vane Shear Device

  • ASTM D8122 – Standard Test Method for Determining Mass per Unit Area of Geohazard Nettings

  • ASTM D8123 – Standard Test Methods for Measuring the Opening Size of Geohazard Nettings

  • ASTM D8081 – Standard Guide for Theory and Principles for Obtaining Reliable and Accurate Bulk Solids Flow Data Using a Direct Shear Cell

  • ASTM D8082 – Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application

  • ASTM D806 – Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures

  • ASTM D8053 – Standard Guide for Data Management and Reporting Associated with Oil and Gas Development Involving Hydraulic Fracturing

  • ASTM D8057 – Standard Specification for Inlet Filters with a Rigid Frame

  • ASTM D8058 – Standard Test Method for Determining the Flexural Strength of a Geosynthetic Cementitious Composite Mat (GCCM) Using the Three-Point Bending Test

  • ASTM D8038 – Standard Practice for Reclamation of Recycled Aggregate Base (RAB) Material

  • ASTM D8030/D8030M – Standard Practice for Sample Preparation for GCCM

  • ASTM D8037/D8037M – Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils

  • ASTM D8006 – Standard Guide for Sampling and Analysis of Residential and Commercial Water Supply Wells in Areas of Exploration and Production (E&P) Operations

  • ASTM D8012 – Standard Practice for Reclamation of Scrap and Waste Asphalt Shingles to Produce Reclaimed Asphalt Shingles (RAS) for Use in Transportation Applications

  • ASTM D7982 – Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels

  • ASTM D7986 – Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing

  • ASTM D7948 – Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry

  • ASTM D7949 – Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations

  • ASTM D7953 – Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method

  • ASTM D7928 – Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis

  • ASTM D7929 – Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells

  • ASTM D7931/D7931M – Standard Guide for Specifying Drainage Geocomposites

  • ASTM D7909 – Standard Guide for Placement of Intentional Leaks During Electrical Leak Location Surveys of Geomembranes

  • ASTM D7880/D7880M – Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag (Withdrawn 2022)

  • ASTM D7891 – Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell

  • ASTM D7865 – Standard Guide for Identification, Packaging, Handling, Storage, and Deployment of Fabricated Geomembrane Panels

  • ASTM D7852 – Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys

  • ASTM D7853 – Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete

  • ASTM D7864/D7864M – Standard Test Method for Determining the Aperture Stability Modulus of Geogrids

  • ASTM D7830/D7830M – Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge

  • ASTM D7822 – Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids

  • ASTM D7765 – Standard Practice for Use of Foundry Sand in Structural Fill and Embankments

  • ASTM D7773 – Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography

  • ASTM D7780 – Standard Practice for Minimum Geospatial Data for Representing Coal Mining Features

  • ASTM D7747/D7747M – Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method

  • ASTM D7748/D7748M – Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles, and Related Products

  • ASTM D7749 – Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method

  • ASTM D7758 – Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

  • ASTM D7759/D7759M – Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration

  • ASTM D7760 – Standard Test Method for Measurement of Hydraulic Conductivity of Materials Derived from Scrap Tires Using a Rigid Wall Permeameter

  • ASTM D7762 – Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash

  • ASTM D7764 – Standard Practice for Pre-Installation Acceptance Testing of Vibrating Wire Piezometers

  • ASTM D7743 – Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders (Withdrawn 2021)

  • ASTM D7737/D7737M – Standard Test Method for Individual Geogrid Junction Strength

  • ASTM D7702/D7702M – Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics

  • ASTM D7703 – Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method

  • ASTM D7707 – Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

  • ASTM D7698 – Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

  • ASTM D7699/D7699M – Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

  • ASTM D7700 – Standard Guide for Selecting Test Methods for Geomembrane Seams

  • ASTM D7701 – Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag (Withdrawn 2020)

  • ASTM D7663 – Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

  • ASTM D7664 – Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

12Next
Kikaku Master LogoKikaku Master LogoKikaku Master Logo

KikakuMaster's goal is to be an insightful source and community for industrial specifications and standards to help engineers.

We see challenges with locating, searching and sharing engineering specs, standards and knowledge.

We began developing a website where engineers could discuss, debate and share their knowledge of various specs and standards.

  • AIA/NAS
  • ASTM
  • AWS

  • ISO

  • SAE

  • Contact Us
  • Latest News
1375 - Demolition Materials (549) 1377 - Cartridge and Propellant Actuated Devices and Components (524) 4720 - Hose and Flexible Tubing (552) 4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings (1823) 5120 - Hand Tools, Nonedged, Nonpowered (1124) 5305 - Screws (781) 5306 - Bolts (996) 5310 - Nuts and Washers (864) 5330 - Packing and Gasket Materials (583) 5340 - Hardware, Commercial (953) 5905 - Resistor (753) 5910 - Capacitors (783) 5930 - Switches (1012) 5935 - Connectors, Electrical (4357) 5940 - Lugs, Terminals, and Terminal Strips (564) 5945 - Relays and Solenoids (733) 5950 - Coils and Transformers (856) 5960 - Electron Tubes and Associated Hardware (1630) 5961 - Semiconductor Devices and Associated Hardware (707) 6145 - Wire and Cable, Electrical (1629) 6240 - Electric Lamps (662) 6505 - Drugs and Biologicals (1343) 6515 - Medical and Surgical Instruments, Equipment, and Supplies (1907) 6520 - Dental Instruments, Equipment, and Supplies (790) 6530 - Hospital Furniture, Equipment, Utensils, and Supplies (745) 6610 - Flight Instruments (540) 6625 - Electrical and Electronic Properties Measuring and Testing Instruments (1241) 6640 - Laboratory Equipment and Supplies (1187) 6810 - Chemicals (1114) 8010 - Paints, Dopes, Varnishes, and Related Products (2046) 8030 - Preservative and Sealing Compounds (554) 8140 - Ammunition and Nuclear Ordnance Boxes, Packages and Special Containers (797) 8305 - Textile Fabrics (910) 8415 - Clothing, Special Purpose (660) 8455 - Badges and Insignia (3093) 8915 - Fruits and Vegetables (531) 9330 - Plastics Fabricated Materials (759) FACR (1647) ISDA (1776) ISDD (786) ISDF (1827) ISDN (581) MISC (1045) PACK (539) SESS (581)

© All rights reserved. • kikakumaster.com

Page load link
Go to Top