List of 9330 - Plastics Fabricated Materials Standards

• UL746B – Polymeric Materials – Long Term Property Evaluations
• UL746A – Polymeric Materials – Short Term Property Evaluations
• UL746C – Polymeric Materials – Use in Electrical Equipment Evaluations
• UL746D – Polymeric Materials – Fabricated Parts
• UL746E – Polymeric Materials – Industrial Laminates, Filament Wound Tubing, Vulcanized Fiber, and Materials Used in Printed Wiring Boards
• UL94 – Plastic Materials for Parts in Devices and Appliances, Test for Flammability of
• SAE-J576 – Plastic Materials for Use in Optical Parts Such as Lenses and Reflex Relectors of Motor Vehicle Lighting Devices
• SAE-J29 – PLASTIC MATERIAL FOR USE IN HOUSINGS OF MOTOR VEHICLE LIGHTING DEVICES (NO S/S DOCUMENT)
• SAE-AMS-S-83474 – Shims, Molded, Filled Resin Compound and Shet Prepreg
• SAE-AMS-P-83310 – Plastic Sheet, Polycarbonate, Transparent
• SAE-AMS-P-21922 – Plastic Rods and Tubes, Polyethelene
• SAE-AMS-L-P-391 – Plastic Sheets, Rods and Tubing, Rigid Cast, Methacrylate (Multiapplication)  (Future Acquistion Refer to Notice 2)
• SAE-AMS3911 – Panels, Sandwich, for Light Weight Portable Shelters, Fabrication of (No S/S Document)
• SAE-AMS3894/9 – Carbon Fiber Tape and Sheet Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 175 (347)
• SAE-AMS3894/8 – Carbon Fiber Tape And Sheet Epoxy Resin Impregnated G 70,000 (483) Tensile, 36,000,000 (248) Modulus, 80 (176)
• SAE-AMS3894/7 – Carbon Fiber Tape And Sheet, Epoxy Resin Impregnated, G 90,000 (621) Tensile, 40,000,000 (276) Modulus, 80 (176)
• SAE-AMS3894/6 – Carbon (Graphite) Fiber Tape and Sheet, Epoxy Resin Impregnated G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 175 (347) (S/S by SAE-AMS3894/10)
• SAE-AMS3894/5 – Carbon Fiber Tape And Sheet, Epoxy Resin Impregnated, G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 80 (176)
• SAE-AMS3894/4 – Carbon (Graphite) Fiber Tape and Sheet, Epoxy Resin Impregnated, G 150,000 (1034) Tensile, 15,000,000 (103) Modulus, 80 (176) (S/S by SAE-AMS3894/11)
• SAE-AMS3894/3 – Carbon Fiber Tape And Sheet, Epoxy Resin Impregnated G 150,000 (1034) Tensile, 19,000,000 (131) Modulus, 80 (176)
• SAE-AMS3894/2 – Carbon Fiber Tape And Sheet, Epoxy Resin Impregnated G 150,000 (1034) Tensile, 20,000,000 (138) Modulus, 175 (347)
• SAE-AMS3894/1 – Carbon Fiber Tape And Sheet, Epoxy Resin Impregnated, G 110,000 (758) Tensile, 27,000,000 (186) Modulus, 175 (347)
• SAE-AMS3890 – Graphite Yarn, Non-Structural 2 Ply Yarn, 720 Filaments
• SAE-AMS3867/6 – Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E180 (Type B0.203-E82)
• SAE-AMS3867/5 – Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E180 (Type B0.142-E82)
• SAE-AMS3867/4 – Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E180 (Type B0.102-E82)
• SAE-AMS3867/3 – Boron Filament Tape, Epoxy-Resin-Impregnated Type B8.0-E374 (Type B0.203-E190)
• SAE-AMS3867/2 – Boron Filament Tape, Epoxy-Resin-Impregnated Type B5.6-E374 (Type B0.142-E190)
• SAE-AMS3867/1 – Boron Filament Tape, Epoxy-Resin-Impregnated Type B4.0-E374 (Type B0.102-E191)
• SAE-AMS3867 – Boron Filament Tape, Epoxy-Resin-Impregnated
• SAE-AMS3865 – Filaments, Boron Tungsten, Substrate, Continuous
• SAE-AMS3842 – ASBESTOS POLYTETRAFLUOROETHYLENE SHEET FIBER REINFORCED (NO S/S DOCUMENT)
• SAE-AMS3840 – ASBESTOS FABRIC POLYTETRAFLUOROETHYLENE IMPREGNATED, SINTERED (NO S/S DOCUMENT)
• SAE-AMS3839 – FABRIC, WIRE REINFORCED ASBESTOSPOLYTETRAFLUOROETHYLENE IMPREGNATED, SINTERED (NO S/S DOCUMENT)
• SAE-AMS3815 – BRAID, FLAT, NYLON, ELECTRICAL TYING SYNTHETIC RUBBER COATED
• SAE-AMS3756 – Moldings, Glass Fiber Filled Polytetrafluoroethylene 75 PTFE Resin, 25 Glass, As sintered
• SAE-AMS3726/3 – Shims, Filled Resin Compound, Liquid Precatalyzed
• SAE-AMS3726/2 – Shims, Filled Resin Compound, Precatalyzed Sheet (No S/S Document)
• SAE-AMS3726/1 – Shims, Filled Resin Compound Liquid (No S/S Document)
• SAE-AMS3726 – Shims, Filled Resin Compound
• SAE-AMS3709 – TILES, SYNTACTIC FOAM
• SAE-AMS3684 – RESIN, POLYIMIDE, SEALING, HIGH TEMPERATURE RESISTANT, 315 DEG. C (600 DEG. F), UNFILLED
• SAE-AMS3671 – Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural (No S/S Document)
• SAE-AMS3668 – Moldings, Polytetrafluoroethylene (PTFE), Premium Grade, as Sintered
• SAE-AMS3666 – Sheet, Polytetrafluoroethylene (PTFE), Glass Cloth Reinforced
• SAE-AMS3656 – Polytetrafluoroethylene Extrusions, Normal Strength, as Sintered
• SAE-AMS3652 – POLYTETRAFLUOROETHYLENE (PTFE) FILM NON-CRITICAL GRADE
• SAE-AMS3650 – Rods, Sheets, and Molded Shapes, Polychlorotrifluoroethylene (PCTFE) Unplasticized
• SAE-AMS3649 – FILM, POLYCHLOROTRIFLUOROETHYLENE (PCTFE) UNPLASTICIZED
• SAE-AMS3648 – Polychlorotrifluoroethylene  (PCTFE), Tubing, Unplasticized
• SAE-AMS3647 – Polyfluoroethylenepropylene Film and Sheet
• SAE-AMS3646 – Sheet, Polychlorotrifluoroethylene (PCTFE) Molded, Unplasticized
• SAE-AMS3635 – Plastic Sheet and Strip, Modified vinyl, Foamed Closed Cell
• SAE-AMS3628 – Plastic Extrusions and Moldings, Polycarbonate, General Purpose
• SAE-AMS3619 – Resin, Polyimide, Laminating, High Temperature Resistant, 315 Deg. C (599 Deg.F)
• SAE-AMS3618 – Resin, Polymide, Thermosetting High Heat (290 Deg. C (554 Deg. F)) Resistant (No S/S Document)
• SAE-AMS3616 – Resin, Polyimide, Laminating and Molding High Temperature Resistant, 370 Deg. C (700 Deg. F) Unfilled, Addition Polymer (No S/S Document)
• SAE-AMS3615 – Tubing, Plastic, Cotton Fabric Reinforced Phenol-Formaldehyde
• SAE-AMS3613 – Film, Copper Clad Polyester
• SAE-AMS3611 – Sheet, Plastic, Polycarbonate General Purpose
• SAE-AMS3607 – Plastic Sheet Cotton Fabric Reinforced Phenol-Formaldehyde
• SAE-AMS3598 – Plastic Sheet, Copper Faced Glass Cloth Reinforced Polytetrafluoroethylene (No S/S Document)
• SAE-AMS3571/9 – RESIN, POLYETHER URETHANE (EU) CASTING FLEXIBLE, SOLID, UNFILLED 75 DUROMETER “D”
• SAE-AMS3571/8 – RESIN, POLYETHER URETHANE (EU) CASTING FLEXIBLE, SOLID, UNFILLED 65 DUROMETER “D”
• SAE-AMS3571/7 – RESIN, POLYETHER URETHANE (EU) CASTING FLEXIBLE, SOLID, UNFILLED 55 DUROMETER “D”
• SAE-AMS3571/6 – RESIN, POLYETHER URETHANE (EU) CASTING FLEXIBLE, SOLID, UNFILLED 95 DUROMETER “A”
• SAE-AMS3571/5 – RESIN, POLYETHER URETHANE (EU) CASTING FLEXIBLE, SOLID, UNFILLED 85 DUROMETER “A”
• SAE-AMS3571/4 – RESIN, POLYETHER URETHANE (EU) CASTING FLEXIBLE, SOLID, UNFILLED 75 DUROMETER “A”
• SAE-AMS3571/3 – RESIN, POLYETHER URETHANE (EU) CASTING FLEXIBLE, SOLID, UNFILLED 65 DUROMETER “A”
• SAE-AMS3571/2 – RESIN, POLYETHER URETHANE (EU) CASTING FLEXIBLE, SOLID, UNFILLED 55 DUROMETER “A”
• SAE-AMS3570 – FOAM, FLEXIBLE POLYURETHANE OPEN CELL, MEDIUM FLEXIBILITY
• SAE-AMS3568/3 – Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/Cubic Foot (320 KG/M3) Density
• SAE-AMS3568/2 – Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240KG/M3) Density
• SAE-AMS3568/1 – Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density
• SAE-AMS3568 – Sheet, Polyether Urethane (EU) Elastomer Foam Shock Absorbing
• SAE-AMS3529 – Plastic Sheet and Film, Vinyl Copolymers, Unplasticized
• NEMA-LI1 – INDUSTRIAL LAMINATED THERMOSETTING PRODUCTS
• NEMA-LD3.1 – Laminates, High-Pressure, Performance, Application, Fabrication, and Installation of (No S/S Document)
• NEMA-LD3 – LAMINATES, HIGH-PRESSURE, DECORATIVE
• AWWA-C105 – ENCASEMENT, POLYETHYLENE, FOR DUCTILE-IRON PIPING FOR WATER AND OTHER LIQUIDS
• ASTM-PS93 – Fabricated Shapes and Finished Parts Fabricated from Polylmide Resins (No S/S Document)
• ASTM-G155 – Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
• ASTM-G53 – MATERIALS, NONMETALLIC, OPERATING LIGHT AND WATER-EXPOSURE APPARATUS (FLUORESCENT UV-CONDENSATION TYPE) FOR EXPOSURE OF (NO S/S DOCUMENT)
• ASTM-G43 – ACIDIFIED SYNTHETIC SEA WATER (FOG) TESTING (NO S/S DOCUMENT)
• ASTM-G29 – Standard Practice for Determining Algal Resistance of Polymeric Films
• ASTM-G26 – Materials, Nonmetallic, Operating Light-Exposure Apparatus (Xenon-Arc Type) with and without Water for Exposure of (No S/S Document)
• ASTM-G23 – MATERIALS, NONMETALLIC, OPERATING LIGHT-EXPOSURE APPARATUS (CARBON-ARC TYPE) WITH ANDWITHOUT WATER FOR EXPOSURE OF (NO S/S DOCUMENT)
• ASTM-G22 – Bacteria, Determining Resistance of Plastics to (No S/S Document)
• ASTM-G21 – Materials to Fungi, Synthetic Polymeric, Determining Resistance of
• ASTM-F814 – SMOKE, SPECIFIC OPTICAL DENSITY OF, GENERATED BY SOLID MATERIALS FOR AEROSPACE APPLICATIONS (NO S/S DOCUMENT)
• ASTM-F801 – Optical Angular Deviation of Transparent Parts, Measuring
• ASTM-F791 – Plastics Transparent, Standard Test Method for Stress Crazing of
• ASTM-F754 – IMPLANTABLE POLYTETRAFLUOROETHYLENE (PTFE) POLYMER FABRICATED IN SHEET, TUBE, AND ROD SHAPES (NO S/S DOCUMENT)
• ASTM-F726 – ADSORBENTS, TESTING SORBENT PERFORMANCE OF, STANDARD METHOD OF
• ASTM-F484 – Plastics, Acrylic, in Contact with Liquid or Semi Liquid Compounds, Stress Crazing of, Standard Test Method for
• ASTM-F330 – Enclosures, Aerospace Transparent, Bird Impact Testing of
• ASTM-F320 – Enclosures, Aerospace Transparent, Hail Impact Resistance of
• ASTM-E595 – Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
• ASTM-E167 – GONIOPHOTOMETRY OF OBJECTS AND MATERIALS (NO S/S DOCUMENT)
• ASTM-E166 – GONIOPHOTOMETRY OF TRANSMITTINGS & MATERIALS (USE ASTM E167)

12Next