List of Nonferrous Metal and Nonferrous Alloy Standards

• ASTM B221M – Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
• ASTM B221 – Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
• ASTM B462 – Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
• ASTM G2/G2M – Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)
• ASTM E252 – Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement
• ASTM B997 – Standard Specification for Zinc-Aluminum Alloys in Ingot Form for Hot-Dip Coatings
• ASTM B998 – Standard Guide for Hot Isostatic Pressing (HIP) of Aluminum Alloy Castings
• ASTM B977/B977M – Standard Specification for Titanium and Titanium Alloy Ingots
• ASTM B982 – Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
• ASTM B983 – Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube
• ASTM B985 – Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis
• ASTM B989 – Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings
• ASTM B960 – Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc
• ASTM B969/B969M – Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, and the Semi-Solid Thixocast and Rheocast Casting Processes
• ASTM B955/B955M – Standard Specification for Aluminum-Alloy Centrifugal Castings
• ASTM B94 – Standard Specification for Magnesium-Alloy Die Castings
• ASTM B942 – Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations
• ASTM B943 – Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications
• ASTM B945 – Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10-Type Tempers
• ASTM B947 – Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate
• ASTM B949 – Standard Specification for General Requirements for Zinc and Zinc Alloy Products
• ASTM B951 – Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought
• ASTM B952/B952M – Standard Specification for Zinc Alloys in Ingot Form for Spin Casting
• ASTM B953 – Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis
• ASTM B954 – Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry
• ASTM B924 – Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins
• ASTM B926 – Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table
• ASTM B928/B928M – Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
• ASTM B93/B93M – Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings
• ASTM B932 – Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum-Gadolinium Alloy Plate, Sheet, and Strip (Withdrawn 2015)
• ASTM B917/B917M – Standard Practice for Heat Treatment of Aluminum-Alloy Castings From All Processes
• ASTM B918/B918M – Standard Practice for Heat Treatment of Wrought Aluminum Alloys
• ASTM B92/B92M – Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting
• ASTM B920 – Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution
• ASTM B899 – Standard Terminology Relating to Non-ferrous Metals and Alloys
• ASTM B90/B90M – Standard Specification for Magnesium-Alloy Sheet and Plate
• ASTM B906 – Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip
• ASTM B907 – Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders
• ASTM B908 – Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot
• ASTM B909 – Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products
• ASTM B91 – Standard Specification for Magnesium-Alloy Forgings
• ASTM B913 – Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors
• ASTM B914 – Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel
• ASTM B896 – Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials
• ASTM B897 – Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot
• ASTM B898 – Standard Specification for Reactive and Refractory Metal Clad Plate
• ASTM B881 – Standard Terminology Relating to Aluminum- and Magnesium-Alloy Products
• ASTM B884 – Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications
• ASTM B885 – Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts
• ASTM B891/B891M – Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer
• ASTM B892 – Standard Specification for ACuZinc5 (Withdrawn 2022)
• ASTM B894 – Standard Specification for ACuZinc5 (Withdrawn 2022)
• ASTM B862 – Standard Specification for Titanium and Titanium Alloy Welded Pipe
• ASTM B86 – Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
• ASTM B863 – Standard Specification for Titanium and Titanium Alloy Wire
• ASTM B864/B864M – Standard Specification for Corrugated Aluminum Box Culverts
• ASTM B865 – Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock
• ASTM B868 – Standard Practice for Contact Performance Classification of Electrical Connection Systems (Withdrawn 2017)
• ASTM B871 – Standard Test Method for Tear Testing of Aluminum Alloy Products (Withdrawn 2017)
• ASTM B872 – Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip
• ASTM B878 – Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors
• ASTM B880 – Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys
• ASTM B861 – Standard Specification for Titanium and Titanium Alloy Seamless Pipe
• ASTM B843 – Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
• ASTM B844 – Standard Guide for Silver-Tin Oxide Contact Material
• ASTM B845 – Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts
• ASTM B85/B85M – Standard Specification for Aluminum-Alloy Die Castings
• ASTM B852 – Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel
• ASTM B854 – Standard Guide for Measuring Electrical Contact Intermittences
• ASTM B860 – Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing
• ASTM B825 – Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples
• ASTM B826 – Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes
• ASTM B827 – Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests
• ASTM B829 – Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube
• ASTM B831 – Standard Test Method for Shear Testing of Thin Aluminum Alloy Products
• ASTM B833 – Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel
• ASTM B834 – Standard Specification for Pressure Consolidated Powder Nickel Alloy Pipe Flanges, Fittings, Valves, and Parts
• ASTM B84 – Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors
• ASTM B804 – Standard Specification for UNS N08367 and UNS N08926 Welded Pipe
• ASTM B805 – Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire
• ASTM B807/B807M – Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys
• ASTM B808 – Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances
• ASTM B810 – Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons
• ASTM B811 – Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding
• ASTM B812 – Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications
• ASTM B814 – Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy(UNS N06920) Plate, Sheet, and Strip
• ASTM B815 – Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod
• ASTM B818 – Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy(UNS R31233) Plate, Sheet and Strip
• ASTM B792 – Standard Specification for Zinc Alloys in Ingot Form for Slush Casting
• ASTM B793 – Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds
• ASTM B794 – Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements
• ASTM B798 – Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography
• ASTM B799 – Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor
• ASTM B80 – Standard Specification for Magnesium-Alloy Sand Castings
• ASTM B788/B788M – Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
• ASTM B789/B789M – Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers
• ASTM B78 – Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating
• ASTM B790/B790M – Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits
• ASTM B76 – Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating
• ASTM B769 – Standard Test Method for Shear Testing of Aluminum Alloys

12Next