List of Environmental Toxicology Standards

• ASTM F990 – Guide for Ecological Considerations for Use of Chemical Dispersants in Oil Spill Response-Sandy Beaches (Withdrawn 2001)
• ASTM F972 – Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Nearshore Subtidal (Withdrawn 2001)
• ASTM F973 – Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tidal Flats (Withdrawn 2001)
• ASTM F962 – Standard Specification for Oil Spill Response Boom Connection: Z-Connector
• ASTM F933 – Guide for Evaluation of Oil Water Separation Systems for Spilled Oil Recovery Applications (Withdrawn 2001)
• ASTM F873 – Standard Guide for Incinerating Oil Spill Wastes at Temporary Field Locations (Withdrawn 2010)
• ASTM F818 – Standard Terminology Relating to Spill Response Booms and Barriers
• ASTM F726 – Standard Test Method for Sorbent Performance of Adsorbents for use on Crude Oil and Related Spills
• ASTM F715 – Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage
• ASTM F716 – Standard Test Methods for Sorbent Performance of Absorbents for Use on Chemical and Light Hydrocarbon Spills
• ASTM F631 – Standard Guide for Collecting Skimmer Performance Data in Controlled Environments
• ASTM F625/F625M – Standard Practice for Classifying Water Bodies for Spill Control Systems
• ASTM F3337 – Standard Guide for Taking Property and Behavior Measurements on Weathered Fractions of Oil
• ASTM F3349 – Standard Guide for Use of Herding Agents in Conjunction with In-Situ Burning
• ASTM F3350 – Standard Guide for Collecting Skimmer Performance Data in Ice Conditions
• ASTM F3251 – Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Baffled Flask
• ASTM F3195 – Standard Guide for Estimating the Volume of Oil Consumed in an In-Situ Burn
• ASTM F3045 – Standard Test Method for Evaluation of the Type and Viscoelastic Stability of Water-in-oil Mixtures Formed from Crude Oil and Petroleum Products Mixed with Water
• ASTM F2926 – Standard Guide for Selection and Operation of Vessel-mounted Camera Systems
• ASTM F2823 – Standard Guide for In-Situ Burning of Oil Spills in Marshes
• ASTM F2709 – Standard Test Method for Determining a Measured Nameplate Recovery Rate of Stationary Oil Skimmer Systems
• ASTM F2682 – Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom
• ASTM F2683 – Standard Guide for Selection of Booms for Oil-Spill Response
• ASTM F2532 – Standard Guide for Determining Net Environmental Benefit of Dispersant Use
• ASTM F2533 – Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels
• ASTM F2534 – Standard Guide for Visually Estimating Oil Spill Thickness on Water
• ASTM F2465/F2465M – Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems
• ASTM F2464 – Standard Guide for Cleaning of Various Oiled Shorelines and Habitats
• ASTM F2438 – Standard Specification for Oil Spill Response Boom Connection: Slide Connector
• ASTM F2327 – Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water
• ASTM F2230 – Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions
• ASTM F2204/F2204M – Standard Guide for Describing Shoreline and Inland Response Techniques
• ASTM F2205 – Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments
• ASTM F2152 – Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom
• ASTM F2084/F2084M – Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments
• ASTM F2059 – Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using the Swirling Flask
• ASTM F2067 – Standard Practice for Development and Use of Oil-Spill Trajectory Models
• ASTM F2008 – Standard Guide for Qualitative Observations of Skimmer Performance
• ASTM F1990 – Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices
• ASTM F1872 – Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations
• ASTM F1788 – Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations
• ASTM F1779 – Standard Practice for Reporting Visual Observations of Oil on Water from Aircraft
• ASTM F1780 – Standard Guide for Estimating Oil Spill Recovery System Effectiveness
• ASTM F1778 – Standard Guide for Selection of Skimmers for Oil-Spill Response
• ASTM F1737/F1737M – Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems
• ASTM F1738 – Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants
• ASTM F1686 – Standard Guide for Surveys to Document and Assess Oiling Conditions
• ASTM F1687 – Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines and Other Terrain
• ASTM F1693 – Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land
• ASTM F1656 – Standard Guide for Health and Safety Training of Oil Spill Responders in the United States (Withdrawn 2010)
• ASTM F1657/F1657M – Standard Practice for Emergency Joining of Booms with Incompatible Connectors
• ASTM F1644 – Standard Guide for Health and Safety Training of Oil Spill Responders (Withdrawn 2010)
• ASTM F1607 – Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps
• ASTM F1599 – Standard Guide for Collecting Performance Data on Temporary Storage Devices
• ASTM F1522 – Standard Guide for Use of the Steam Stripping Process in Mitigating Chemical Spills (Withdrawn 2007)
• ASTM F1523 – Standard Guide for Selection of Booms in Accordance With Water Body Classifications
• ASTM F1524 – Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills
• ASTM F1525/F1525M – Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills (Withdrawn 2015)
• ASTM F1460/F1460M – Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems
• ASTM F1413/F1413M – Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems
• ASTM F1279 – Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces
• ASTM F1280 – Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces
• ASTM F1210 – Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies
• ASTM F1231 – Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks
• ASTM F1209 – Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs
• ASTM F1127 – Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel
• ASTM F1129/F1129M – Standard Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids (Withdrawn 2021)
• ASTM F1093 – Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom
• ASTM F1084 – Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
• ASTM F1008 – Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Salt Marshes (Withdrawn 2001)
• ASTM F1010 – Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response-Bird Habitats (Withdrawn October 2001)
• ASTM F1011 – Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel
• ASTM E979 – Standard Practice for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids
• ASTM E875 – Standard Practice for Evaluation of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry
• ASTM E728 – Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides
• ASTM E727/E727M – Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides
• ASTM E723 – Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)
• ASTM E725 – Standard Test Method for Sampling Granular Carriers and Granular Pesticides
• ASTM E726 – Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides
• ASTM E686 – Standard Method for Evaluation of Antimicrobial Agents in Aqueous Metal Working Fluids (Withdrawn 2004)
• ASTM E640 – Standard Test Method for Preservatives in Water-Containing Cosmetics
• ASTM E641 – Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture
• ASTM E642 – Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment
• ASTM E645 – Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems
• ASTM E609 – Standard Terminology Relating to Pesticides
• ASTM E549 – Standard Guide for Preparing Field Sprayer Calibration Procedures
• ASTM E550 – Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures
• ASTM E3364 – Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Porous and Nonporous Materials Against Staining by Streptomyces species (A Pink Stain Organism)
• ASTM E3321 – Standard Test Method for Intraluminal Catheter Model used to Evaluate Antimicrobial Urinary Catheters for Prevention of Escherichia coli Biofilm Growth
• ASTM E3285 – Standard Test Method for Evaluation of Contact-Mediated Microbial Transference
• ASTM E3286 – Standard Practice for Preparation Of Cell Monolayers on Glass Surfaces for Evaluation of Microbicidal Properties of Non-Chemical Based Antimicrobial Treatment Technologies
• ASTM E3273 – Standard Practice to Assess Microbial Decontamination of Indoor Air using an Aerobiology Chamber
• ASTM E3226 – Standard Test Method for Processing Cellulose Sponge-wipes to Detect Bacillus anthracis Spores Sampled from Environmental Surfaces
• ASTM E3227 – Standard Test Practice for Qualitative Assessment of Antifungal Activity on Textiles
• ASTM E3218 – Standard Test Method for Quantitative Method for Testing Antimicrobial Agents against Spores of C. difficile on Hard, Nonporous Surfaces
• ASTM E3178 – Standard Practice for Evaluating Static and Cidal Chemical Decontaminants against Bacillus Spores using Centrifugal Filtration Tubes
• ASTM E3179 – Standard Test Method for Determining Antimicrobial Efficacy of Ultraviolet Germicidal Irradiation against Influenza Virus on Fabric Carriers with Simulated Soil
• ASTM E3180 – Standard Test Method for Quantification of a Bacillus subtilis Biofilm Comprised of Vegetative Cells and Spores Grown Using the Colony Biofilm Model
• ASTM E3160 – Standard Test Method for Quantitative Evaluation of the Antibacterial Properties of Porous Antibacterial Treated Articles
• ASTM E3161 – Standard Practice for Preparing a Pseudomonas aeruginosa or Staphylococcus aureus Biofilm using the CDC Biofilm Reactor

12Next