Abstract
This specification establishes requirements for the material properties, including dimensional stability and extrusion quality, of three classes of rigid, poly(vinyl chloride) (PVC) interior-profile extrusions. Methods for identifying interior-profile extrusions that comply with the requirements of this specification are provided.
Scope
1.1 This specification establishes requirements for the material properties, including dimensional stability and extrusion quality, of rigid, poly(vinyl chloride) (PVC) interior-profile extrusions. Methods for identifying interior-profile extrusions that comply with the requirements of this specification are provided.
1.2 Use of rigid PVC recycled plastic is permitted in accordance with the requirements of Sections 6 and 7.
1.3 Rigid PVC compounds for interior building product applications are covered in Specification D1784.
1.4 Rigid PVC exterior profile extrusions for assembled windows and doors are covered in Specification D4726.
1.5 The text of this standard references notes and footnotes which provide explanatory material. These notes and footnotes (excluding those in Tables and Figures) shall not be considered as requirements of this standard.
1.6 The values stated in SI units are to be regarded as the standard. The values given in parentheses are given for information only.
NOTE 1: Information with regard to application should be obtained from the manufacturers of the profiles.
NOTE 2: There is no known ISO equivalent to this standard.
1.7 The following precautionary caveat pertains only to the test method portion, Section 8, of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.8 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
