Significance and Use 5.1 This test method is designed to provide a standardized procedure to ensure comparable results between manufacturers, testing laboratories, and users. 5.2 This test method attempts to realistically quantify the radiation protection provided by radiation protective garments under real world conditions for workers primarily exposed to scattered radiation in medical fluoroscopy work. 5.3 This test method is designed to simulate exposure conditions to radiation scattered from the body of the patient undergoing fluoroscopy through an angle of 90° from the primary X-ray beam. 5.4 The test method is designed to include contributions of radiation dose to the wearer from secondary radiation emitted from the shielding material.Scope 1.1 This test method establishes a procedure for measuring the relative reduction in the intensity of X-radiation provided by shielding garments to the human user under conditions simulating actual use. 1.2 This test method provides a condition simulating X-rays generated between 60 and 130 kV that are scattered through an angle of 90° by a water equivalent material. 1.3 This test method applies to both leaded and no-leaded radiation protective materials. 1.4 This test method provides a method for inclusion of secondary radiations generated within the protective material into a more realistic evaluation of radiation protection. 1.5 The values given in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. Some specific hazards statements are given in Section 7.
