List of Water Testing Standards

• ASTM F660 – Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters
• ASTM F488 – Standard Test Method for On-site Screening of Heterotrophic Bacteria in Water (Withdrawn 2004)
• ASTM F316 – Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test
• ASTM E1198 – Standard Practice for Sampling Zooplankton with Pumps
• ASTM E1199 – Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
• ASTM E1200 – Standard Practice for Preserving Zooplankton Samples
• ASTM E1201 – Standard Practice for Sampling Zooplankton with Conical Tow Nets
• ASTM D932 – Standard Practice for Filamentous Iron Bacteria in Water and Water-Formed Deposits
• ASTM D933 – Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits
• ASTM D934 – Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction
• ASTM D887 – Standard Practices for Sampling Water-Formed Deposits
• ASTM D888 – Standard Test Methods for Dissolved Oxygen in Water
• ASTM D857 – Standard Test Method for Aluminum in Water
• ASTM D858 – Standard Test Methods for Manganese in Water
• ASTM D859 – Standard Test Method for Silica in Water
• ASTM D8456 – Standard Test Method for Determination of Nitrosamines in Water by Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
• ASTM D8421 – Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances (PFAS) in Aqueous Matrices by Co-solvation followed by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D8422 – Standard Practice for Pre-Stressing Terminal Point-of-Use Water Filters before Testing by Test Method F838
• ASTM D8429 – Standard Test Method for Legionella pneumophila in Water Samples Using Legiolert
• ASTM D8431 – Standard Test Method for Detection of Water-soluble Petroleum Oils by A-TEEM Optical Spectroscopy and Multivariate Analysis
• ASTM D8361 – Standard Test Method for Total Organic Carbon in Water by Two Stage Wet Chemical Catalyzed Hydroxyl Radical Oxidation with Infra-Red Detection of Resulting Carbon Dioxide
• ASTM D8332 – Standard Practice for Collection of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers
• ASTM D8333 – Standard Practice for Preparation of Water Samples with High, Medium, or Low Suspended Solids for Identification and Quantification of Microplastic Particles and Fibers Using Raman Spectroscopy, IR Spectroscopy, or Pyrolysis-GC/MS
• ASTM D8293 – Standard Guide for Evaluating and Expressing the Uncertainty of Radiochemical Measurements
• ASTM D8294 – Standard Practice for Estimating pH to Verify Status of Aqueous Samples
• ASTM D8272 – Standard Guide for Development and Optimization of D19 Chemical Analysis Methods Intended for EPA Compliance Reporting
• ASTM D8273 – Standard Practice for Determination of Total and Available Cyanide in Solid Waste and Soil after Alkaline Extraction
• ASTM D8234 – Standard Test Method for Anions in High Ionic Water by Ion Chromatography using Tandem Suppressed Conductivity and UV Detection
• ASTM D8243 – Standard Test Method for Determination of APS Reductase to Estimate Sulfate Reducing Bacterial Bioburdens in Water – Enzyme-Linked Immunosorbent Assay Method
• ASTM D8193 – Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbon (TPH) in Water and Wastewater with Solvent Extraction Using Non-Dispersive Mid-IR Transmission Spectroscopy
• ASTM D8083 – Standard Test Method for Total Nitrogen, and Total Kjeldahl Nitrogen (TKN) by Calculation, in Water by High Temperature Catalytic Combustion and Chemiluminescence Detection
• ASTM D8084 – Standard Test Method for Photoelectrochemical Oxygen Demand of Freshwater Sources for Drinking Water Treatment Plants and Treated Drinking Water
• ASTM D807 – Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)
• ASTM D8024 – Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Water by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
• ASTM D8025 – Standard Test Method for Determination of Select Pesticides in Water by Multiple Reaction Monitoring Liquid Chromatography Tandem Mass Spectrometry
• ASTM D8026 – Standard Practice for Determination of Tc-99 in Water by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
• ASTM D8027 – Standard Practice for Concentration of Select Radionuclides Using MnO2 for Measurement Purposes
• ASTM D8028 – Standard Test Method for Measurement of Dissolved Gases Methane, Ethane, Ethylene, and Propane by Static Headspace Sampling and Flame Ionization Detection (GC/FID)
• ASTM D8002 – Standard Test Method for Modified Fouling Index (MFI-0.45) of Water
• ASTM D8001 – Standard Test Method for Determination of Total Nitrogen, Total Kjeldahl Nitrogen by Calculation, and Total Phosphorus in Water, Wastewater by Ion Chromatography
• ASTM D7979 – Standard Test Method for Determination of Per- and Polyfluoroalkyl Substances in Water, Sludge, Influent, Effluent, and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D7980 – Standard Guide for Ion-Chromatographic Analysis of Anions in Grab Samples of Ultrapure Water (UPW) in the Semiconductor Industry
• ASTM D7937 – Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water
• ASTM D7938 – Standard Practice for Sampling of C-14 in Gaseous Effluents
• ASTM D7939 – Standard Test Method for Rapid Radiochemical Determination of Americium-241 in Water
• ASTM D7902 – Standard Terminology for Radiochemical Analyses
• ASTM D7903 – Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges
• ASTM D7781 – Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase
• ASTM D7782 – Standard Practice for Determination of the 99 %/95 % Critical Level (WCL) and a Reliable Detection Estimate (WDE) Based on Within-laboratory Data (Withdrawn 2022)
• ASTM D7783 – Standard Practice for Within-laboratory Quantitation Estimation (WQE)
• ASTM D7784 – Standard Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry
• ASTM D7729 – Standard Practice for Determining and Expressing Precision of Measurement Results, in the Analysis of Water, as Relative Standard Deviation, Utilizing DQCALC Software
• ASTM D7730 – Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D7731 – Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D7742 – Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ 12) in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D7725 – Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)
• ASTM D7726 – Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water
• ASTM D7727 – Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant
• ASTM D7728 – Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance
• ASTM D7677 – Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water
• ASTM D7678 – Standard Test Method for Total Oil and Grease (TOG) and Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy
• ASTM D7644 – Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D7645 – Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D7598 – Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry
• ASTM D7599 – Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (L
• ASTM D7600 – Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM D7601 – Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation
• ASTM D7574 – Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM D7575 – Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination
• ASTM D7597 – Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liqu
• ASTM D7573 – Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection
• ASTM D7572 – Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil
• ASTM D7535 – Standard Test Method for Lead-210 in Water
• ASTM D7510 – Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water
• ASTM D7511 – Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection
• ASTM D7512 – Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation
• ASTM D7513 – Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges
• ASTM D7485 – Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM D7362 – Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition
• ASTM D7363 – Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode
• ASTM D7365 – Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
• ASTM D7366 – Standard Practice for Estimation of Measurement Uncertainty for Data from Regression-based Methods
• ASTM D7315 – Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode
• ASTM D7316 – Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions
• ASTM D7283 – Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting
• ASTM D7284 – Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection
• ASTM D7285 – Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems
• ASTM D7282 – Standard Practice for Setup, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements
• ASTM D7237 – Standard Test Method for Free Cyanide and Aquatic Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
• ASTM D7168 – Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk
• ASTM D7126 – Standard Test Method for On-Line Colorimetric Measurement of Silica
• ASTM D7065 – Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry
• ASTM D7066 – Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination
• ASTM D6994 – Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection
• ASTM D6919 – Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography
• ASTM D6908 – Standard Practice for Integrity Testing of Water Filtration Membrane Systems
• ASTM D6888 – Standard Test Method for Available Cyanides with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection
• ASTM D6889 – Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)