Skip to content
Toggle Navigation
Home
FSC
AIA
List of AIA/NAS
ASME
ASME Boiler and Pressure Vessel Code
ASTM
ASTM Annual Book
List of ASTM
SAE
List of SAE
Your Favorite
Contact Us
English
日本語
Search for:
List of Corrosion and Wear Standards
132 standards
ASTM G48 – Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution
ASTM G96 – Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)
ASTM G97 – Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM G98 – Standard Test Method for Galling Resistance of Materials
ASTM G99 – Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus
ASTM G83 – Standard Test Method for Wear Testing with a Crossed-Cylinder Apparatus (Withdrawn 2005)
ASTM G84 – Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing
ASTM G85 – Standard Practice for Modified Salt Spray (Fog) Testing
ASTM G87 – Standard Practice for Conducting Moist SO2 Tests
ASTM G91 – Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation
ASTM G92 – Standard Practice for Characterization of Atmospheric Test Sites
ASTM G69 – Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys
ASTM G71 – Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes
ASTM G73 – Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus
ASTM G75 – Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)
ASTM G76 – Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM G77 – Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test
ASTM G78 – Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments
ASTM G79 – Standard Practice for Evaluation of Metals Exposed to Carburization Environments (Withdrawn 2005)
ASTM G81 – Standard Test Method for Jaw Crusher Gouging Abrasion Test
ASTM G82 – Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance
ASTM G64 – Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys
ASTM G65 – Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus
ASTM G66 – Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)
ASTM G67 – Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)
ASTM G49 – Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM G50 – Standard Practice for Conducting Atmospheric Corrosion Tests on Metals
ASTM G51 – Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing
ASTM G5 – Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
ASTM G52 – Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater
ASTM G56 – Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials (Withdrawn 2022)
ASTM G57 – Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method
ASTM G58 – Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments
ASTM G59 – Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements
ASTM G60 – Standard Practice for Conducting Cyclic Humidity Exposures
ASTM G61 – Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys
ASTM G44 – Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution
ASTM G46 – Standard Guide for Examination and Evaluation of Pitting Corrosion
ASTM G47 – Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products
ASTM G31 – Standard Guide for Laboratory Immersion Corrosion Testing of Metals
ASTM G3 – Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing
ASTM G32 – Standard Test Method for Cavitation Erosion Using Vibratory Apparatus
ASTM G33 – Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens
ASTM G34 – Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)
ASTM G35 – Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids
ASTM G36 – Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution
ASTM G37 – Standard Practice for Use of Mattsson’s Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys
ASTM G38 – Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM G39 – Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM G4 – Standard Guide for Conducting Corrosion Tests in Field Applications
ASTM G40 – Standard Terminology Relating to Wear and Erosion
ASTM G41 – Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment
ASTM G28 – Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys
ASTM G30 – Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens
ASTM G202 – Standard Test Method for Using Atmospheric Pressure Rotating Cage
ASTM G203 – Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems
ASTM G204 – Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions
ASTM G205 – Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils
ASTM G206 – Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests
ASTM G208 – Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus
ASTM G209 – Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys
ASTM G210 – Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus
ASTM G211 – Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets
ASTM G215 – Standard Guide for Electrode Potential Measurement
ASTM G217 – Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method
ASTM G218 – Standard Guide for External Corrosion Protection of Ductile Iron Pipe Utilizing Polyethylene Encasement Supplemented by Cathodic Protection
ASTM G219 – Standard Guide for Determination of Static Coefficient of Friction of Test Couples Using an Inclined Plane Testing Device
ASTM G220 – Standard Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potentials
ASTM G184 – Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage
ASTM G185 – Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode
ASTM G186 – Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
ASTM G187 – Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method
ASTM G188 – Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys
ASTM G189 – Standard Guide for Laboratory Simulation of Corrosion Under Insulation
ASTM G190 – Standard Guide for Developing and Selecting Wear Tests (Withdrawn 2021)
ASTM G192 – Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique
ASTM G193 – Standard Terminology and Acronyms Relating to Corrosion
ASTM G194 – Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane
ASTM G195 – Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser
ASTM G196 – Standard Test Method for Galling Resistance of Material Couples
ASTM G198 – Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood
ASTM G199 – Standard Guide for Electrochemical Noise Measurement
ASTM G200 – Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil
ASTM G182 – Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings
ASTM G165 – Standard Practice for Determining Rail-to-Earth Resistance
ASTM G168 – Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens
ASTM G170 – Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory
ASTM G171 – Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus
ASTM G174 – Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact
ASTM G176 – Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method
ASTM G180 – Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries
ASTM G181 – Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions
ASTM G149 – Standard Practice for Conducting the Washer Test for Atmospheric Galvanic Corrosion (Withdrawn 2004)
ASTM G150 – Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys
ASTM G157 – Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries
ASTM G158 – Standard Guide for Three Methods of Assessing Buried Steel Tanks
ASTM G161 – Standard Guide for Corrosion-Related Failure Analysis
ASTM G16 – Standard Guide for Applying Statistics to Analysis of Corrosion Data
ASTM G162 – Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils
ASTM G164 – Standard Test Method for Determination of Surface Lubrication on Flexible Webs
1
2
Next
Page load link
Go to Top