List of Waste Management Standards

• ASTM E949 – Standard Test Method for Total Moisture in a Refuse-Derived Fuel Laboratory Sample (Withdrawn 2004)
• ASTM E953/E953M – Standard Practice for Fusibility of Refuse-Derived Fuel (RDF) Ash
• ASTM E954 – Standard Practice for Packaging and Shipping of Laboratory Samples of Refuse-Derived Fuel (Withdrawn 2002)
• ASTM E955 – Standard Test Method for Thermal Characteristics of Refuse-Derived Fuel Macrosamples (Withdrawn 2017)
• ASTM E956 – Standard Classification for Municipal-Mixed Nonferrous Metals (MNM)
• ASTM E959 – Standard Test Method for Characterizing the Performance of Refuse Size-Reduction Equipment
• ASTM E926 – Standard Practices for Preparing Refuse-Derived Fuel (RDF) Samples for Analyses of Metals (Withdrawn 2002)
• ASTM E929 – Standard Test Method for Measuring Electrical Energy Requirements of Processing Equipment (Withdrawn 2014)
• ASTM E897 – Standard Test Method for Volatile Matter in the Analysis Sample of Refuse-Derived Fuel (Withdrawn 2004)
• ASTM E885 – Standard Test Methods for Analyses of Metals in Refuse-Derived Fuel by Atomic Absorption Spectroscopy (Withdrawn 2009)
• ASTM E886 – Standard Practices for Dissolution of Refuse-Derived Fuel (RDF) Ash Samples for Analyses of Metals (Withdrawn 2002)
• ASTM E887 – Standard Test Method for Silica in Refuse-Derived Fuel (RDF) and RDF Ash
• ASTM E889 – Standard Test Method for Composition or Purity of a Solid Waste Materials Stream
• ASTM E856 – Standard Definitions of Terms and Abbreviations Relating to Physical and Chemical Characteristics of Refuse Derived Fuel (Withdrawn 2004)
• ASTM E868 – Standard Test Methods for Conducting Performance Tests on Mechanical Conveying Equipment Used in Resource Recovery Systems (Withdrawn 2005)
• ASTM E828 – Standard Test Method for Designating the Size of RDF-3 From its Sieve Analysis (Withdrawn 2009)
• ASTM E829 – Standard Practice for Preparing Refuse-Derived Fuel (RDF) Laboratory Samples for Analysis
• ASTM E830 – Standard Test Method for Ash in the Analysis Sample of Refuse-Derived Fuel (Withdrawn 2004)
• ASTM E778 – Standard Test Methods for Nitrogen in Refuse-Derived Fuel Analysis Samples
• ASTM E790 – Standard Test Method for Residual Moisture in Refuse-Derived Fuel Analysis Samples
• ASTM E791 – Standard Test Method for Calculating Refuse-Derived Fuel Analysis Data from As-Determined to Different Bases
• ASTM E775 – Standard Test Methods for Total Sulfur in the Analysis Sample of Refuse-Derived Fuel
• ASTM E776 – Standard Test Method for Determination of Forms of Chlorine in Refuse-Derived Fuel
• ASTM E777 – Standard Test Method for Carbon and Hydrogen in the Analysis Sample of Refuse-Derived Fuel
• ASTM E711 – Standard Test Method for Gross Calorific Value of Refuse-Derived Fuel by the Bomb Calorimeter (Withdrawn 2004)
• ASTM E708 – Standard Specification for Waste Glass as a Raw Material for the Manufacture of Glass Containers
• ASTM E688 – Standard Test Methods for Waste Glass as a Raw Material for Glass Manufacturing (Withdrawn 2019)
• ASTM E701 – Standard Test Methods for Municipal Ferrous Scrap
• ASTM E702 – Standard Specification for Municipal Ferrous Scrap
• ASTM E2866 – Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid, and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Li
• ASTM E2838 – Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM E2787 – Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)
• ASTM E1553 – Standard Practice for Collection of Airborne Particulate Lead During Abatement and Construction Activities (Withdrawn 2002)
• ASTM E1370 – Standard Guide for Air Sampling Strategies for Worker and Workplace Protection
• ASTM E1266 – Standard Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications
• ASTM E1248 – Standard Practice for Shredder Explosion Protection
• ASTM E1183 – Standard Test Method for Air Drying RDF-5 for Further Analysis (Withdrawn 2009)
• ASTM E1107 – Standard Test Method for Measuring the Throughput of Resource-Recovery Unit Operations
• ASTM E1108 – Standard Test Method for Determination of the Recovery of a Product in a Materials Separation Device
• ASTM E1109 – Standard Test Method for Determining the Bulk Density of Solid Waste Fractions
• ASTM E1076 – Standard Practice for Maintaining Health and Safety Records at Solid Waste Processing Facilities (Withdrawn 2010)
• ASTM E1037 – Standard Test Method for Measuring Particle Size Distribution of RDF-5
• ASTM D8460 – Standard Test Method for Quantification of Volatile Organic Compounds Using Proton Transfer Reaction Mass Spectrometry
• ASTM D8408/D8408M – Standard Guide for Development of Long-Term Monitoring Plans for Vapor Mitigation Systems
• ASTM D8404 – Standard Practice for Preparation of Soil Samples by Ammonium Bifluoride-Nitric Acid Digestion for Subsequent Analysis for Metals and Metalloids
• ASTM D8358 – Standard Guide for Assessment and Inclusion of Wall Deposits in the Analysis of Single-Stage Samplers for Airborne Particulate Matter
• ASTM D8344 – Standard Practice for Ammonium Bifluoride and Nitric Acid Digestion of Airborne Dust and Dust-Wipe Samples for the Determination of Metals and Metalloids
• ASTM D8310 – Standard Test Method for Analysis of Target Phenols (TPs) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
• ASTM D8208 – Standard Practice for Collection of Non-Fibrous Nanoparticles Using a Nanoparticle Respiratory Deposition (NRD) Sampler
• ASTM D8170 – Standard Guide for Using Disposable Handheld Soil Core Samplers for the Collection and Storage of Soil for Volatile Organic Analysis
• ASTM D8174 – Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Small-Scale Closed Cup Tester
• ASTM D8175 – Standard Test Method for Finite Flash Point Determination of Liquid Wastes by Pensky-Martens Closed Cup Tester
• ASTM D8187 – Standard Guide for Interpretation of Standard Humidity Cell Test Results
• ASTM D8155 – Standard Practice for Shake Extraction of Solid Mining and Metallurgical Processing Waste with Water
• ASTM D8106 – Standard Test Methods for Determining the Oil Sorption Capacity of Organophilic Clay
• ASTM D8064 – Standard Test Method for Elemental Analysis of Soil and Solid Waste by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams
• ASTM D8037/D8037M – Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils
• ASTM D8018 – Standard Test Method for Determination of (Tri-n-butyl)-n-tetradecylphosphonium chloride (TTPC) in Soil by Multiple Reaction Monitoring Liquid Chromatography/Mass Spectrometry (LC/MS/MS)
• ASTM D7968 – Standard Test Method for Determination of Polyfluorinated Compounds in Soil by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)
• ASTM D7948 – Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry
• ASTM D7929 – Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
• ASTM D7858 – Standard Test Method for Determination of Bisphenol A in Soil, Sludge, and Biosolids by Pressurized Fluid Extraction and Analyzed by Liquid Chromatography/Tandem Mass Spectrometry
• ASTM D7831 – Standard Practice for Sampling of Tanks by Field Personnel
• ASTM D7822 – Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids
• ASTM D7773 – Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3) Using Filter Sampling and Suppressed Ion Chromatography
• ASTM D7758 – Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
• ASTM D7707 – Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust
• ASTM D7663 – Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
• ASTM D7648/D7648M – Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
• ASTM D7659 – Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
• ASTM D7626 – Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
• ASTM D7458 – Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection
• ASTM D7441 – Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples (Withdrawn 2018)
• ASTM D7439 – Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
• ASTM D7352 – Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods
• ASTM D7353 – Standard Practice for Sampling of Liquids in Waste Management Activities Using a Peristaltic Pump
• ASTM D7296 – Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
• ASTM D7294 – Standard Guide for Collecting Treatment Process Design Data at a Contaminated Site—A Site Contaminated with Chemicals of Interest
• ASTM D7262 – Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
• ASTM D7242/D7242M – Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers (Withdrawn 2022)
• ASTM D7202 – Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
• ASTM D7203 – Standard Practice for Screening Trichloroethylene (TCE)-Contaminated Media Using a Heated Diode Sensor (Withdrawn 2022)
• ASTM D7204 – Standard Practice for Sampling Waste Streams on Conveyors
• ASTM D7144 – Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids
• ASTM D7069 – Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
• ASTM D7045 – Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities
• ASTM D7048 – Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
• ASTM D7049 – Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres
• ASTM D7035 – Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• ASTM D6982 – Standard Practice for Detecting Hot Spots Using Point-Net (Grid) Search Patterns
• ASTM D6956 – Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
• ASTM D6966 – Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
• ASTM D6907 – Standard Practice for Sampling Soils and Contaminated Media with Hand-Operated Bucket Augers
• ASTM D6911 – Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
• ASTM D6914/D6914M – Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
• ASTM D6877 – Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace