List of Roofing Standards

• ASTM E936 – Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing (Withdrawn 2012)
• ASTM E907 – Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems (Withdrawn 2013)
• ASTM E2777 – Standard Guide for Vegetative (Green) Roof Systems
• ASTM E2788/E2788M – Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems
• ASTM E2396/E2396M – Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
• ASTM E2397/E2397M – Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
• ASTM E2398/E2398M – Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems
• ASTM E2399/E2399M – Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegetative (Green) Roof Systems
• ASTM E2400/E2400M – Standard Guide for Selection, Installation, and Maintenance of Plants for Vegetative (Green) Roof Systems
• ASTM E1980 – Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
• ASTM E1918 – Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
• ASTM E102/E102M – Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
• ASTM D88/D88M – Standard Test Method for Saybolt Viscosity
• ASTM D8425 – Standard Guide for the Use of Sodium Bentonite Needle-Punched Geotextile Waterproofing Systems with Cast-in-Place Concrete Below-Grade Foundation Construction
• ASTM D8257/D8257M – Standard Specification for Mechanically Attached Polymeric Roof Underlayment Used in Steep Slope Roofing
• ASTM D8231 – Standard Practice for the Use of a Low Voltage Electronic Scanning System for Detecting and Locating Breaches in Roofing and Waterproofing Membranes
• ASTM D8154 – Standard Test Methods for 1H-NMR Determination of Ketone-Ethylene-Ester and Polyvinyl Chloride Contents in KEE-PVC Roofing Fabrics
• ASTM D8109 – Standard Guide for Waterproofing Repair of Concrete by Chemical Grout Crack Injection
• ASTM D8099/D8099M – Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)
• ASTM D8051/D8051M – Standard Specification for Wax-Modified Asphalt Used in Roofing
• ASTM D8052/D8052M – Standard Test Method for Quantification of Air Leakage in Low-Sloped Membrane Roof Assemblies
• ASTM D8013 – Standard Guide for Establishing a Recycle Program for Roof Coverings, Roofing Membrane, and Shingle Materials
• ASTM D8014 – Standard Guide for Selection of Membranes Used in Vegetative Roofing Systems
• ASTM D7954/D7954M – Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Nondestructive Electrical Impedance Scanners
• ASTM D7897 – Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance
• ASTM D7877 – Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes
• ASTM D7851 – Standard Guide for Design of Sustainable, Low-Slope Roofing Systems
• ASTM D7832/D7832M – Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)
• ASTM D7693/D7693M – Standard Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks
• ASTM D7694/D7694M – Standard Test Methods for Self-Adhesive Modified Bituminous Sheet Material
• ASTM D7654/D7654M – Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
• ASTM D7655/D7655M – Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
• ASTM D7635/D7635M – Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
• ASTM D7636/D7636M – Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
• ASTM D7586/D7586M – Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies (Withdrawn 2020)
• ASTM D7530/D7530M – Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
• ASTM D7505/D7505M – Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
• ASTM D7492/D7492M – Standard Guide for Use of Drainage System Media with Waterproofing Systems
• ASTM D7425/D7425M – Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
• ASTM D7379/D7379M – Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
• ASTM D7349/D7349M – Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal Around Fasteners
• ASTM D7311/D7311M – Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane (Withdrawn 2013)
• ASTM D7281 – Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
• ASTM D7186 – Standard Practice for Quality Assurance Observation of Roof Construction and Repair
• ASTM D7158/D7158M – Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)
• ASTM D7119/D7119M – Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
• ASTM D7120/D7120M – Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
• ASTM D7105/D7105M – Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
• ASTM D7067 – Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane (Withdrawn 2014)
• ASTM D7051 – Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
• ASTM D7052/D7052M – Standard Test Method for Determining Impact Resistance of New Low Slope Roof Membranes Using Steel Balls (Z8295Z)
• ASTM D7053/D7053M – Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
• ASTM D6945/D6945M – Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
• ASTM D6946/D6946M – Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) (Withdrawn 2022)
• ASTM D6946 – Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade) (Withdrawn 2012)
• ASTM D6947/D6947M – Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
• ASTM D6948/D6948M – Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
• ASTM D6950/D6950M – Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks (Withdrawn 2015)
• ASTM D6878/D6878M – Standard Specification for Thermoplastic Polyolefin-Based Sheet Roofing
• ASTM C1305/C1305M – Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
• ASTM C1306/C1306M – Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
• ASTM C1250 – Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes (Withdrawn 2015)
• ASTM C1127/C1127M – Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface