List of Paper and Packaging Standards

• ASTM F99 – Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
• ASTM F904 – Standard Practice for Separation of Plies for Bond Strength of Laminated Flexible Materials
• ASTM F874 – Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors
• ASTM F88/F88M – Standard Test Method for Seal Strength of Flexible Barrier Materials
• ASTM F372 – Standard Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique (Withdrawn 2009)
• ASTM F392/F392M – Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability
• ASTM F34 – Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
• ASTM F3375 – Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products
• ASTM F3300 – Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
• ASTM F3287 – Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
• ASTM F3299 – Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor)
• ASTM F3263 – Standard Guide for Packaging Test Method Validation
• ASTM F3169 – Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
• ASTM F3136 – Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
• ASTM F3039 – Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
• ASTM F3004 – Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
• ASTM F2981 – Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air
• ASTM F2824 – Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
• ASTM F2825 – Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
• ASTM F2714 – Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
• ASTM F2638 – Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
• ASTM F2622 – Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
• ASTM F2559/F2559M – Standard Guide for Writing a Specification for Sterilizable Peel Pouches
• ASTM F2475 – Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
• ASTM F2476 – Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using an Infrared Detector
• ASTM F2391 – Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
• ASTM F2338 – Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
• ASTM F2250 – Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
• ASTM F2251 – Standard Test Method for Thickness Measurement of Flexible Packaging Material
• ASTM F2252/F2252M – Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
• ASTM F2227 – Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method
• ASTM F2228 – Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
• ASTM F2203 – Standard Test Method for Linear Measurement Using Precision Steel Rule
• ASTM F2217/F2217M – Standard Practice for Coating/Adhesive Weight Determination
• ASTM F2095 – Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
• ASTM F2096 – Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
• ASTM F2097 – Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
• ASTM F2054/F2054M – Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
• ASTM F2029 – Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
• ASTM F2013 – Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
• ASTM F1980 – Standard Guide for Accelerated Aging of Sterile Barrier Systems and Medical Devices
• ASTM F1921/F1921M – Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
• ASTM F1927 – Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
• ASTM F1929 – Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
• ASTM F1884 – Standard Test Methods for Determining Residual Solvents in Packaging Materials
• ASTM F1886/F1886M – Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
• ASTM F1769 – Standard Test Method for Measurement of Diffusivity, Solubility, and Permeability of Organic Vapor Barriers Using a Flame Ionization Detector (Withdrawn 2004)
• ASTM F1770 – Standard Test Method for Evaluation of Solubility, Diffusivity, and Permeability of Flexible Barrier Materials to Water Vapor (Withdrawn 2004)
• ASTM F17 – Standard Terminology Relating to Primary Barrier Packaging
• ASTM F1608 – Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
• ASTM F1585 – Standard Guide for Integrity Testing of Porous Barrier Medical Packages (Withdrawn 2006)
• ASTM F151 – Standard Test Method for Residual Solvents in Flexible Barrier Materials (Withdrawn 2004)
• ASTM F1519 – Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
• ASTM F1500 – Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
• ASTM F1479 – Standard Terminology Relating to Microwave Food Packaging (Withdrawn 2007)
• ASTM F1416 – Standard Guide for Selection of Time-Temperature Indicators
• ASTM F1349 – Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
• ASTM F1317 – Standard Test Method for Calibration of Microwave Ovens
• ASTM F1327 – Standard Terminology Relating to Barrier Materials for Medical Packaging (Withdrawn 2007)
• ASTM F1306 – Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
• ASTM F1307 – Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
• ASTM F1308 – Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
• ASTM F1278 – Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
• ASTM F1249 – Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
• ASTM F119 – Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
• ASTM F1168 – Guide for Use in the Establishment of Thermal Processes for Foods Packaged in Flexible Containers (Withdrawn 2000)
• ASTM F1140/F1140M – Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
• ASTM F1115 – Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
• ASTM E398 – Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
• ASTM E171/E171M – Standard Practice for Conditioning and Testing Flexible Barrier Packaging
• ASTM D996 – Standard Terminology of Packaging and Distribution Environments
• ASTM D999 – Standard Test Methods for Vibration Testing of Shipping Containers
• ASTM D951 – Standard Test Method for Water Resistance of Shipping Containers by Spray Method
• ASTM D880 – Standard Test Method for Impact Testing for Shipping Containers and Systems
• ASTM D8409 – Standard Guide for Conducting Stacking Tests on UN Packagings Using Guided or Unguided Loads
• ASTM D8410 – Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and Products for Compostability in Municipal or Industrial Aerobic Composting Facilities
• ASTM D8314 – Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
• ASTM D8134 – Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types
• ASTM D8135 – Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
• ASTM D7932 – Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
• ASTM D7887 – Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
• ASTM D7860 – Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
• ASTM D7790 – Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing
• ASTM D7709 – Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
• ASTM D7660 – Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
• ASTM D7478/D7478M – Standard Specification for Heavy Duty Sheathed Wood Crates
• ASTM D7386 – Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
• ASTM D7387 – Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
• ASTM D7298 – Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
• ASTM D7257 – Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions (Withdrawn 2018)
• ASTM D7030 – Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
• ASTM D6880/D6880M – Standard Specification for Wood Boxes
• ASTM D6881/D6881M – Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density