List of Paint and Related Coating Standards

• ASTM E2030 – Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings (Withdrawn 2018)
• ASTM E203 – Standard Test Method for Water Using Volumetric Karl Fischer Titration
• ASTM E2036 – Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
• ASTM E2037 – Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
• ASTM E200 – Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
• ASTM E1899 – Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide
• ASTM E179 – Standard Guide for Selection of Geometric Conditions for Measurement of Reflection and Transmission Properties of Materials
• ASTM E1808 – Standard Guide for Designing and Conducting Visual Experiments
• ASTM E1809 – Standard Test Method for Measurement of High-Visibility Retroreflective-Clothing Marking Material Using a Portable Retroreflectometer (Withdrawn 2010)
• ASTM E1786 – Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
• ASTM E1787 – Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
• ASTM E1754 – Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
• ASTM E1767 – Standard Practice for Specifying the Geometries of Observation and Measurement to Characterize the Appearance of Materials
• ASTM E1743 – Standard Practice for Selection and Use of Portable Retroreflectomers for the Measurement of Pavement Marking Materials (Withdrawn 2003)
• ASTM E1746 – Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
• ASTM E1708 – Standard Practice for Electronic Interchange of Color and Appearance Data
• ASTM E1709 – Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle
• ASTM E1710 – Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer
• ASTM E167 – Standard Practice for Goniophotometry of Objects and Materials (Withdrawn 2005)
• ASTM E1682 – Standard Guide for Modeling the Colorimetric Properties of a CRT-Type Visual Display Unit
• ASTM E1696 – Standard Test Method for Field Measurement of Raised Retroreflective Pavement Markers Using a Portable Retroreflectometer
• ASTM E1651 – Standard Test Method for Total Luminous Reflectance Factor by Use of 30/t Integrating-Sphere Geometry (Withdrawn 2004)
• ASTM E1615 – Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry
• ASTM E1584 – Standard Test Method for Assay of Nitric Acid
• ASTM E1547 – Standard Terminology Relating to Industrial and Specialty Chemicals
• ASTM E1541 – Standard Practice for Specifying and Matching Color Using the Colorcurve System (Withdrawn 2007)
• ASTM E1499 – Standard Guide for Selection, Evaluation, and Training of Observers
• ASTM E1477 – Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
• ASTM E1478 – Standard Practice for Visual Color Evaluation of Transparent Sheet Materials (Withdrawn 2022)
• ASTM E1455 – Standard Practice for Obtaining Colorimetric Data from a Visual Display Unit Using Tristimulus Colorimeters
• ASTM E1360 – Standard Practice for Specifying Color by Using the Optical Society of America Uniform Color Scales System
• ASTM E1331 – Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Hemispherical Geometry
• ASTM E1336 – Standard Test Method for Obtaining Colorimetric Data From a Visual Display Unit by Spectroradiometry
• ASTM E1338 – Standard Guide for Identification of Metals and Alloys in Computerized Material Property Databases
• ASTM E1341 – Standard Practice for Obtaining Spectroradiometric Data from Radiant Sources for Colorimetry
• ASTM E1345 – Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
• ASTM E1347 – Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
• ASTM E1348 – Standard Test Method for Transmittance and Color by Spectrophotometry Using Hemispherical Geometry
• ASTM E1349 – Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45°:0° or 0°:45°) Geometry
• ASTM E1247 – Standard Practice for Detecting Fluorescence in Object-Color Specimens by Spectrophotometry
• ASTM E1229 – Standard Specification for Calcium Hypochlorite
• ASTM E1228 – Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure
• ASTM E1146 – Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
• ASTM E1164 – Standard Practice for Obtaining Spectrometric Data for Object-Color Evaluation
• ASTM E1120 – Standard Specification for Liquid Chlorine
• ASTM E1119 – Standard Specification for Industrial Grade Ethylene Glycol
• ASTM E1064 – Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
• ASTM D962 – Standard Specification for Aluminum Powder and Paste Pigments for Paints
• ASTM D964 – Standard Specification for Metallic Copper Powder for Use in Antifouling Paints
• ASTM D968 – Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
• ASTM D969 – Standard Test Method for Laboratory Determination of Degree of Bleeding of Traffic Paint (Withdrawn 2010)
• ASTM D970 – Standard Test Methods for Para Red and Toluidine Red Pigments (Withdrawn 2003)
• ASTM D912 – Standard Specification for Cuprous Oxide for Use in Antifouling Paints (Withdrawn 2004)
• ASTM D913 – Standard Practice for Evaluating Degree of Pavement Marking Line Wear
• ASTM D914 – Standard Test Methods for Ethylcellulose
• ASTM D890 – Standard Test Method for Water in Liquid Pine Chemicals
• ASTM D891 – Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
• ASTM D889 – Standard Test Method for Volatile Oil in Rosin
• ASTM D853 – Standard Test Method for Hydrogen Sulfide and Sulfur Dioxide Content (Qualitative) of Industrial Aromatic Hydrocarbons (Withdrawn 2013)
• ASTM D868 – Standard Practice for Determination of Degree of Bleeding of Traffic Paint
• ASTM D869 – Standard Test Method for Evaluating Degree of Settling of Paint
• ASTM D870 – Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
• ASTM D871 – Standard Test Methods of Testing Cellulose Acetate
• ASTM D847 – Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons
• ASTM D848 – Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons
• ASTM D849 – Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons
• ASTM D850 – Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
• ASTM D85 – Standard Specification for Ochre Pigment
• ASTM D852 – Standard Test Method for Solidification Point of Benzene
• ASTM D841 – Standard Specification for Nitration Grade Toluene
• ASTM D8424 – Standard Guide for Retroreflective Composite Optics Laboratory Procedures
• ASTM D843 – Standard Specification for Nitration Grade Xylene
• ASTM D83 – Standard Specification for Red Lead Pigment
• ASTM D8380 – Standard Test Method for Dry Abrasion Resistance of Hydrophobic and Omniphobic Coatings
• ASTM D835 – Specification for Refined Benzene-485 (Withdrawn 1997)
• ASTM D8367 – Standard Practice for Making a Laboratory Pavement Marking Sample Using a Pavement Marking and Drop-on Particles
• ASTM D8370 – Standard Test Method for Field Measurement of Electrochemical Impedance on Coatings and Linings
• ASTM D8330 – Standard Specification for Artists’ Pastels
• ASTM D8331/D8331M – Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference
• ASTM D8301 – Standard Test Method for Determination of the Content of Nitroxide Radical (4-Hydroxy-2,2,6,6-tetramethylpiperidine-1-oxyl) in Butadiene, Styrene and Isoprene by Cyclic Voltammetry Method
• ASTM D8311 – Standard Test Method for Impurities in Monoethylene Glycol by Gas Chromatography with Normalization
• ASTM D8266 – Standard Test Method for Analysis of Bisphenol A (4,4`-Isopropylidenediphenol) by High Performance Liquid Chromatography
• ASTM D8271 – Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete
• ASTM D822/D822M – Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
• ASTM D823 – Standard Practices for Producing Films of Uniform Thickness of Paint, Coatings and Related Products on Test Panels
• ASTM D8207 – Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PAT) by Atomic Absorption (AA) Spectrometry
• ASTM D817 – Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate
• ASTM D81 – Standard Specification for Basic Carbonate White Lead Pigment
• ASTM D8163 – Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings
• ASTM D8157 – Standard Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants
• ASTM D8160 – Standard Test Method for Un-notched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Pavement Marking Materials
• ASTM D8161 – Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight
• ASTM D8162 – Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit
• ASTM D8130 – Standard Test Method for Determination of Metals in Purified Terephthalic Acid (PTA) by Inductively Coupled Plasma Atomic Emission Spectrometric Method
• ASTM D8104 – Standard Guide for Determining Coating Qualification Test Data Applicability
• ASTM D8087 – Standard Test Method for Color of Maleic Anhydride in the Molten State and After Heating (Platinum-Cobalt Scale) Using Tristimulus Colorimetry
• ASTM D8090 – Standard Test Method for Particle Size Distribution and Shape Analysis of Paints and Pigments Using Dynamic Imaging Methods
• ASTM D8062 – Standard Specification for Purified Terephthalic Acid (PTA) with Low p-Toluic Acid
• ASTM D8063 – Standard Test Method for Water in Purified Terephthalic Acid (PTA) by Volumetric Karl Fischer Titration
• ASTM D804 – Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products

Previous123Next