List of Masonry Standards

• ASTM E518/E518M – Standard Test Methods for Flexural Bond Strength of Masonry
• ASTM E519/E519M – Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
• ASTM E514/E514M – Standard Test Method for Water Penetration and Leakage Through Masonry
• ASTM E3317 – Standard Specification for Silica-Based Sediments for the Evaluation of Stormwater Treatment Devices
• ASTM E3318 – Standard Terminology for Standards Relating to Stormwater Control Measures
• ASTM E3332 – Standard Test Method for Determining Trash and/or Debris Capture Performance of Stormwater Control Measures
• ASTM C1364 – Standard Specification for Architectural Cast Stone
• ASTM C1372 – Standard Specification for Dry-Cast Segmental Retaining Wall Units
• ASTM C1357 – Standard Test Methods for Evaluating Masonry Bond Strength (Withdrawn 2016)
• ASTM C1325 – Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units
• ASTM C1314 – Standard Test Method for Compressive Strength of Masonry Prisms
• ASTM C1319 – Standard Specification for Concrete Grid Paving Units
• ASTM C1324 – Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
• ASTM C1283 – Standard Practice for Installing Clay Flue Lining
• ASTM C1288 – Standard Specification for Fiber-Cement Interior Substrate Sheets
• ASTM C129 – Standard Specification for Nonloadbearing Concrete Masonry Units
• ASTM C1298 – Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys
• ASTM C1272 – Standard Specification for Heavy Vehicular Paving Brick
• ASTM C126 – Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
• ASTM C1261 – Standard Specification for Firebox Brick for Residential Fireplaces
• ASTM C1262/C1262M – Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
• ASTM C1227 – Standard Specification for Precast Concrete Septic Tanks
• ASTM C1228 – Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
• ASTM C1229 – Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
• ASTM C1230 – Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
• ASTM C1232 – Standard Terminology for Masonry
• ASTM C1244/C1244M – Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
• ASTM C1244M – Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric) (Withdrawn 2020)
• ASTM C1209 – Standard Terminology of Concrete Masonry Units and Related Units (Withdrawn 2009)
• ASTM C1214 – Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
• ASTM C1214M – Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
• ASTM C12 – Standard Practice for Installing Vitrified Clay Pipe Lines
• ASTM C1225 – Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
• ASTM C1226 – Standard Test Method for Soluble Chlorides in Asbestos (Withdrawn 2007)
• ASTM C1208/C1208M – Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
• ASTM C118M – Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)
• ASTM C1194 – Standard Test Method for Compressive Strength of Architectural Cast Stone
• ASTM C1195 – Standard Test Method for Absorption of Architectural Cast Stone
• ASTM C1196 – Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
• ASTM C1197 – Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
• ASTM C118 – Standard Specification for Concrete Pipe for Irrigation or Drainage
• ASTM C1185 – Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
• ASTM C1186 – Standard Specification for Flat Fiber-Cement Sheets
• ASTM C1148 – Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar (Withdrawn 2019)
• ASTM C1154 – Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
• ASTM C1162/C1162M – Standard Test Method for Loose Density of Asbestos (Withdrawn 2021)
• ASTM C1167 – Standard Specification for Clay Roof Tiles
• ASTM C1131 – Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
• ASTM C1142 – Standard Specification for Extended Life Mortar for Unit Masonry (Withdrawn 2019)
• ASTM C1124/C1124M – Standard Test Method for Kerosene Retention of Asbestos (Withdrawn 2021)
• ASTM C1125 – Standard Test Method for Penetration Index of Asbestos (Withdrawn 2021)
• ASTM C1119/C1119M – Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes (Withdrawn 2021)
• ASTM C1120/C1120M – Standard Test Method for Wash Test of Asbestos (Withdrawn 2022)
• ASTM C1121/C1121M – Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos (Withdrawn 2021)
• ASTM C1122/C1122M – Standard Test Method for Wet Volume of Asbestos (Withdrawn 2021)
• ASTM C1123/C1123M – Standard Test Method for Compressibility and Recovery of Asbestos (Withdrawn 2021)
• ASTM C1089 – Standard Specification for Spun Cast Prestressed Concrete Poles
• ASTM C1091 – Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
• ASTM C1093 – Standard Practice for Accreditation of Testing Agencies for Masonry
• ASTM C1096/C1096M – Standard Test Method for Determination of Wood Fiber in Asbestos Cement (Withdrawn 2022)
• ASTM C1103 – Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
• ASTM C1103M – Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric) (Withdrawn 2022)
• ASTM C1072 – Standard Test Methods for Measurement of Masonry Flexural Bond Strength
• ASTM C1080 – Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers (Withdrawn 2019)
• ASTM C1081 – Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers (Withdrawn 2019)
• ASTM C1082 – Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill (Withdrawn 2019)
• ASTM C1088 – Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
• ASTM C1037 – Standard Practice for Inspection of Underground Precast Concrete Utility Structures
• ASTM C1006/C1006M – Standard Test Method for Splitting Tensile Strength of Masonry Units
• ASTM C1019 – Standard Test Method for Sampling and Testing Grout for Masonry