List of Geotechnical Engineering Standards

• ASTM D7648/D7648M – Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
• ASTM D7659 – Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection
• ASTM D7629/D7629M – Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features (Withdrawn 2013)
• ASTM D7630/D7630M – Standard Practice for Minimum Geospatial Data for Postmining Land Uses (Withdrawn 2013)
• ASTM D7631 – Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location (Withdrawn 2013)
• ASTM D7625 – Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Abrasiveness Index Method
• ASTM D7626 – Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
• ASTM D7627 – Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine (Withdrawn 2013)
• ASTM D7628 – Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas (Withdrawn 2013)
• ASTM D7608 – Standard Test Method for Torsional Ring Shear Test to Measure Drained Fully Softened Shear Strength and Stress Dependent Strength Envelope of Fine-Grained Soils
• ASTM D7613 – Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
• ASTM D7556 – Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
• ASTM D7557/D7557M – Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
• ASTM D7560 – Standard Test Method for Determination of Fiber Length Percentages in Hydraulic Erosion Control Products (HECPs)
• ASTM D7533/D7533M – Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Area (Withdrawn 2013)
• ASTM D7534/D7534M – Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit (Withdrawn 2013)
• ASTM D7498/D7498M – Standard Test Method for Vertical Strip Drains Using a Large-Scale Consolidation Test
• ASTM D7499/D7499M – Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
• ASTM D7503 – Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
• ASTM D7466/D7466M – Standard Test Method for Measuring Asperity Height of Textured Geomembranes
• ASTM D7481 – Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
• ASTM D7458 – Standard Test Method for Determination of Beryllium in Soil and Sediment Using Ammonium Bifluoride Extraction and Fluorescence Detection
• ASTM D7465/D7465M – Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
• ASTM D7439 – Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry
• ASTM D7441 – Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples (Withdrawn 2018)
• ASTM D7443 – Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents (Withdrawn 2013)
• ASTM D7400/D7400M – Standard Test Methods for Downhole Seismic Testing
• ASTM D7401 – Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests (Withdrawn 2017)
• ASTM D7406 – Standard Test Method for Time-Dependent Compressive Deformation Under Constant Pressure for Geosynthetic Drainage Products
• ASTM D7407 – Standard Guide for Determining the Transmission of Gases Through Geomembranes
• ASTM D7408 – Standard Specification for Non-Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
• ASTM D7409 – Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
• ASTM D7380/D7380M – Standard Test Method for Soil Compaction Determination at Shallow Depths Using 2.3-kg [5-lbm] Dynamic Cone Penetrometer
• ASTM D7382 – Standard Test Methods for Determination of Maximum Dry Unit Weight of Granular Soils Using a Vibrating Hammer
• ASTM D7383 – Standard Test Methods for Axial Rapid Load (Compressive Force Pulse) Testing of Deep Foundations
• ASTM D7384 – Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary (Withdrawn 2013)
• ASTM D7367/D7367M – Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
• ASTM D7361 – Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
• ASTM D7351/D7351M – Standard Test Method for Determination of Sediment Retention Device (SRD) Effectiveness in Sheet Flow Applications
• ASTM D7352 – Standard Practice for Volatile Contaminant Logging Using a Membrane Interface Probe (MIP) in Unconsolidated Formations with Direct Push Methods
• ASTM D7322/D7322M – Standard Test Method for Determination of Erosion Control Product (ECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
• ASTM D7296 – Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds
• ASTM D7299 – Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
• ASTM D7300 – Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
• ASTM D7272 – Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Premanufactured Taped Methods
• ASTM D7273/D7273M – Standard Guide for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
• ASTM D7274 – Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (PBGMs)
• ASTM D7275 – Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGMs)
• ASTM D7276 – Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
• ASTM D7277 – Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
• ASTM D7262 – Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
• ASTM D7263 – Standard Test Methods for Laboratory Determination of Density and Unit Weight of Soil Specimens
• ASTM D7243 – Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
• ASTM D7238 – Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
• ASTM D7239 – Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
• ASTM D7240 – Standard Practice for Electrical Leak Location Using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive-Backed Geomembrane Spark Test)
• ASTM D7242/D7242M – Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers (Withdrawn 2022)
• ASTM D7208 – Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
• ASTM D7202 – Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection
• ASTM D7207 – Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions (Withdrawn 2014)
• ASTM D7176 – Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
• ASTM D7177/D7177M – Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
• ASTM D7178 – Standard Practice for Determining the Number of Constrictions “m” of Non-Woven Geotextiles as a Complementary Filtration Property
• ASTM D7179 – Standard Test Method for Determining Geonet Breaking Force
• ASTM D7180/D7180M – Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
• ASTM D7181 – Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils
• ASTM D7128 – Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
• ASTM D7144 – Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Determination of Metals and Metalloids
• ASTM D7106/D7106M – Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
• ASTM D7099 – Standard Terminology Relating to Frozen Soil and Rock
• ASTM D7100 – Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
• ASTM D7101 – Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions (Withdrawn 2022)
• ASTM D7069 – Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
• ASTM D7070 – Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
• ASTM D7045 – Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities
• ASTM D7046 – Standard Guide for Use of the Metal Detection Method for Subsurface Exploration (Withdrawn 2020)
• ASTM D7047 – Standard Test Method for Swell Volume of Plantago Insularis (Ovata, Psyllium)
• ASTM D7048 – Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
• ASTM D7049 – Standard Test Method for Metalworking Fluid Aerosol in Workplace Atmospheres
• ASTM D7056 – Standard Test Method for Determining the Tensile Shear Strength of Prefabricated Bituminous Geomembrane Seams
• ASTM D7035 – Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• ASTM D7012 – Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
• ASTM D7013/D7013M – Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
• ASTM D7014 – Standard Practice for Installation of Double-Twisted Wire Mesh Gabions and Revet Mattresses
• ASTM D7015/D7015M – Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
• ASTM D7001 – Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
• ASTM D7002 – Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method
• ASTM D7003/D7003M – Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
• ASTM D7004/D7004M – Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
• ASTM D7005/D7005M – Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
• ASTM D7006 – Standard Practice for Ultrasonic Testing of Geomembranes
• ASTM D7007 – Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials
• ASTM D7008 – Standard Specification for Geosynthetic Alternate Daily Covers
• ASTM D698 – Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12,400 ft-lbf/ft3 (600 kN-m/m3))
• ASTM D6992 – Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
• ASTM D6966 – Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
• ASTM D6938 – Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
• ASTM D6939 – Standard Practice for Brushmattressing (Withdrawn 2012)
• ASTM D6940/D6940M – Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
• ASTM D6941 – Standard Practice for Measuring Fluidization Segregation Tendencies of Powders

Previous123Next