List of Gas Metal Arc Welding Standards

• AWS G2.5/G2.5M – GUIDE FOR THE FUSION WELDING OF ZIRCONIUM AND ZIRCONIUM ALLOYS
• AWS D2.0 – SPECIFICATIONS FOR WELDED HIGHWAY AND RAILWAY BRIDGES (HISTORICAL)
• AWS B2.1-8-005 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF AUSTENITIC STAINLESS STEEL, (M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-232 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) FOLLOWED BY ARGON PLUS 25% CARBON DIOXIDE SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL
• AWS B2.1-1-233 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR 75% ARGON PLUS 25% CARBON DIOXIDE SHIELDED GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) FOLLOWED BY 98% ARGON PLUS 2% OXYGEN
• AWS B2.1-1-234 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 25% CARBON DIOXIDE SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUPS 1 and 2), 1/8 THROUGH 1-1/2 INCH THICK, E7XT-X, AS-WELDED OR PWHT CONDITION (HISTORICAL)
• AWS B2.1-1-235 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR ARGON PLUS 2% OXYGEN SHIELDED GAS METAL ARC WELDING (SPRAY TRANSFER MODE) OF CARBON STEEL (M-1/P-1/S-1, GROUPS 1 AND 2), 1/8 THROUGH 1-1/2 INCH THICK, ER70S-3, FLAT POSITION ONLY (HISTORICAL)
• AWS B2.1-1-020 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR 75% AR/25% CO2 SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED OR PWHT CONDITION
• AWS B2.1-1-021 – STANDARD WELDING PROC. SPEC. (SWPS) FOR GAS TUNGSTEN ARC WELDING FOLLOWED BY SHIELDED METAL ARC WELDING OF CARBON STEEL (M-1/P-1, GROUP 1 OR 2) 1/8 ” [3 MM] THROUGH 1-1/2 ” [38 MM] THICK, ER70S-2 AND E7018, IN THE AS-WELDED OR PWHT CONDITION
• AWS B2.1-1-027 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1/2 INCH THICK, E71T-11, AS-WELDED CONDITION (HISTORICAL)
• AWS B2.1-1-003 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARC WELDING (SHORT CIRCUITING TRANSFER MODE) OF GALVANIZED STEEL (M-1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-004 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR GAS METAL ARCWELDING (SHORT CIRCUITING TRANSFER MODE) OF CARBON STEEL, (M-1, GROUP 1), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION, WITH OR WITHOUT BACKING
• AWS B2.1-1-018 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR SELF-SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2),1/8 THROUGH 1-1/2 INCH THICK, E71T-8, AS-WELDED CONDITION (HISTORICAL)
• AWS B2.1-1-019 – STANDARD WELDING PROCEDURE SPECIFICATION (SWPS) FOR CO2 SHIELDED FLUX CORED ARC WELDING OF CARBON STEEL, (M-1/P-1/S-1, GROUP 1 OR 2), 1/8 THROUGH 1-1/2 INCH THICK, E70T-1 AND E71T-1, AS-WELDED CONDITION
• AWS B2.1-4-218 – Standard Welding Procedure Specification (SWPS) for Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-4/P-4, Group 1 or 2), E8018-82, 1/8 inch [3 mm] through 1/2 inch [13 mm] Thick, As-Welded Condition; 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick
• AWS B2.1/B2.1M – SPECIFICATION FOR WELDING PROCEDURE AND PERFORMANCE QUALIFICATION (HISTORICAL)
• AWS B2.1-1/8-006 – STANDARD WELDING PROCEDURE SPECIFICATION FOR GMAW (SHORT CIRCUITING TRANSFER MODE) OF CARBON STEEL TO AUSTENITIC STAINLESS STEEL, (M-1 TO M-8, P-8, OR S-8), 18 THROUGH 10 GAUGE, IN THE AS-WELDED CONDITION WITH OR WITHOUT BACKING
• AWS A5.34/A5.34M – SPECIFICATION FOR NICKEL – ALLOY ELECTRODES FOR FLUX CORED ARC WELDING (HISTORICAL)
• AWS A5.7/A5.7M – SPECIFICATION FOR COPPER AND COPPER – ALLOY BARE WELDING RODS AND ELECTRODES
• AWS A5.9/A5.9M (ISO 14343) – WELDING CONSUMABLES-WIRE ELCTRODES, STRIP ELECTRODES, WIRES, AND RODS FOR ARC WELDING OF STAINLESS AND HEAT RESISTING STEELS – CLASSIFICATION (HISTORICAL)
• AWS A5.9/A5.9M – SPECIFICATION FOR BARE STAINLESS STEEL WELDING ELECTRODES AND RODS
• AWS A5.20/A5.20M – CARBON STEEL ELECTRODES FOR FLUX CORED ARC WELDING (HISTORICAL)
• AWS A5.22/A5.22M – SPECIFICATION FOR STAINLESS STEEL FLUX CORED AND METAL CORED WELDING ELECTRODES AND RODS
• AWS A5.24/A5.24M – ZIRCONIUM AND ZIRCONIUM ALLOY WELDING ELECTRODES AND RODS (HISTORICAL)
• AWS A5.28/A5.28M – SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES AND RODS FOR GAS SHIELDED ARC WELDING (HISTORICAL)
• AWS A5.29/A5.29M – SPECIFICATION FOR LOW-ALLOY STEEL ELECTRODES FOR FLUX CORED ARC WELDING (HISTORICAL)
• AWS A5.19 – SPECIFICATION FOR MAGNESIUM ALLOY WELDING ELECTRODES AND RODS