List of Building Standards

• ASTM E3127 – Standard Guide for Specifying Water Vapor Transmission Material Properties of Water-Resistive Barriers and Air Barriers
• ASTM E3090/E3090M – Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems
• ASTM E3091 – Standard Specification for Systems to Measure Sound Levels
• ASTM E3069 – Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall
• ASTM E3074/E3074M – Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities
• ASTM E3075 – Standard Test Method for Water Immersion and Drying for Evaluation of Flood Damage Resistance
• ASTM E3087 – Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods
• ASTM E3053 – Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel
• ASTM E3054/E3054M – Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes
• ASTM E3036 – Standard Guide for Notating Facade Conditions in the Field
• ASTM E3037 – Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems
• ASTM E3038 – Standard Practice for Assessing and Qualifying Candidates as Inspectors of Firestop Systems and Fire-Resistive Joint Systems
• ASTM E3035 – Standard Classification for Facility Asset Component Tracking System (FACTS)
• ASTM E3008/E3008M – Standard Classification for Transportation Surface Elements—UNIFORMAT II
• ASTM E2963 – Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments
• ASTM E2964 – Standard Test Method for Measurement of the Normalized Insertion Loss of Doors
• ASTM E2969 – Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction
• ASTM E2947 – Standard Guide for Building Enclosure Commissioning
• ASTM E2953 – Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units
• ASTM E2954 – Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members
• ASTM E2923 – Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry
• ASTM E2924 – Standard Practice for Intumescent Coatings
• ASTM E2925 – Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function
• ASTM E2913/E2913M – Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples
• ASTM E2914/E2914M – Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples
• ASTM E2841 – Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
• ASTM E2817 – Standard Test Method for Test Fueling Masonry Heaters
• ASTM E283/E283M – Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
• ASTM E2813 – Standard Practice for Building Enclosure Commissioning
• ASTM E2778 – Standard Specification for Custom Tiled/Mortared Masonry Heaters (Stoves)
• ASTM E2779 – Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
• ASTM E2780 – Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
• ASTM E2785 – Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
• ASTM E2786 – Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems
• ASTM E2691 – Standard Practice for Job Productivity Measurement
• ASTM E2692 – Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products
• ASTM E2634 – Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
• ASTM E2637 – Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification
• ASTM E2638 – Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room
• ASTM E2649 – Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
• ASTM E2611 – Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method
• ASTM E2618 – Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances
• ASTM E2619/E2619M – Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
• ASTM E2620 – Standard Classification for Program and Project Estimate Summaries
• ASTM E2568 – Standard Specification for PB Exterior Insulation and Finish Systems
• ASTM E2570/E2570M – Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
• ASTM E2556/E2556M – Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
• ASTM E2557 – Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
• ASTM E2558 – Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces
• ASTM E2505 – Standard Practice for Industrial Rope Access
• ASTM E2506 – Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
• ASTM E2511 – Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies
• ASTM E2513 – Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
• ASTM E2514 – Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
• ASTM E2515 – Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
• ASTM E2516 – Standard Classification for Cost Estimate Classification System
• ASTM E2517 – Standard Specification for Cargo Bed Cover, Type III (M35A2, 212 Ton Cargo Truck/M1078, 212 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 21
• ASTM E2518 – Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)
• ASTM E2485/E2485M – Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
• ASTM E2486/E2486M – Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
• ASTM E2484 – Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
• ASTM E2459 – Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
• ASTM E2461 – Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
• ASTM E2462 – Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
• ASTM E2463 – Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
• ASTM E2430/E2430M – Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”)
• ASTM E2431 – Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
• ASTM E241 – Standard Guide for Limiting Water-Induced Damage to Buildings
• ASTM E2377 – Standard Specification for Shelter, Electrical Equipment, Lightweight
• ASTM E2393 – Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
• ASTM E2395 – Standard Specification for Voluntary Security Performance of Window and Door Assemblies with Glazing Impact
• ASTM E2355 – Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface (Withdrawn 2019)
• ASTM E2357 – Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies
• ASTM E2358 – Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
• ASTM E2359/E2359M – Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
• ASTM E2354 – Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units (Withdrawn 2019)
• ASTM E2342/E2342M – Standard Test Method for Durability Testing of Duct Sealants
• ASTM E2351 – Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality (Withdrawn 2022)
• ASTM E2353 – Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades
• ASTM E2319 – Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
• ASTM E2320 – Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
• ASTM E2321 – Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
• ASTM E2322 – Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
• ASTM E2323 – Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer (Withdrawn 2012)
• ASTM E2265 – Standard Terminology for Anchors and Fasteners in Concrete and Masonry
• ASTM E2266 – Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
• ASTM E2267 – Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022)
• ASTM E2268 – Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
• ASTM E2269 – Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
• ASTM E2270 – Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
• ASTM E2271/E2271M – Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings
• ASTM E2273 – Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
• ASTM E2264 – Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
• ASTM E2249 – Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
• ASTM E2252 – Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
• ASTM E2255/E2255M – Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
• ASTM E2260 – Standard Guide for Repointing (Tuckpointing) Historic Masonry
• ASTM E2235 – Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
• ASTM E2239 – Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
• ASTM E2240 – Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units (Withdrawn 2015)

Previous123Next