List of SAE Standards

• SAE-AMS4855 – LEADED RED BRASS, SAND AND CENTRIFUGAL CASTINGS 85CU – 5.0SN – 5.0PB – 5.0ZN AS CAST
• SAE-AMS4845 – TIN BRONZE CASTINGS, SAND AND CENTRIFUGAL 87.5CU – 10SN – 2ZN AS CAST
• SAE-AMS4842 – CASTINGS, LEADED BRONZE, SAND AND CENTRIFUGAL 80CU – 10SN – 9.5PB AS CAST
• SAE-AMS4511 – COPPER-BERYLLIUM ALLOY CASTINGS 97CU – 2.1BE – 0.52(CO + NI) – 0.28SI SOLUTION AND PRECIPITATION HEAT TREATED (TF00)
• SAE-AMS4484 – Magnesium Alloy Castings, Permanent Mold 9.0A1 – 2.0ZN (AZ92A-T6) Solution and Precipitation Heat Treated
• SAE-AMS4455 – MAGNESIUM ALLOY, INVESTMENT CASTINGS 10A1 (AM100A-T6) SOLUTION AND PRECIPITATION HEAT TREATED
• SAE-AMS4453 – Magnesium Alloy, Investment Castings 9.0AI – 2.0Zn(AZ92A-T6) Solution and Precipitation Heat Treated
• SAE-AMS4452 – Magnesium Alloy, Investment Castings 8.7A1 – 0.70ZN – 0.22MN (AZ91C – T6) Solution and Precipitation Heat Treated
• SAE-AMS4424 – Magnesium Alloy Castings, Sand 6.0A1 – 3.0ZN (AZ63-T6) Solution and Precipitation Heat Treated
• SAE-AMS4418 – MAGNESIUM ALLOY, SAND CASTINGS 2.5AG – 2.1DI – 0.70ZR (QE22A-T6) SOLUTION AND PRECIPITATION HEAT TREATED
• SAE-AMS4281 – Aluminum Alloy Castings, Permanent Mold 5.0si – 1.2cu – 0.50mg (355.0-t6) Solution And Precipitation Heat Treated
• SAE-AMS4261 – Aluminum Alloy Castings, Investment 7.0si – 0.32mg (356.0-t51) Precipitation Heat Treated
• SAE-AMS4236 – Aluminum Alloy Castings 4.6cu – 0.35mn – 0.25mg – 0.22ti (A206.0-t4) Solution Heat Treated And Naturally Aged
• SAE-AMS4235 – Aluminum Alloy Castings, 4.6cu – 0.35mn – 0.25mg – 0.22ti (A206.0-t71) Solution And Precipitation Heat Treated
• SAE-AMS4229 – Aluminum Alloy Castings, High Strength 4.5cu – 0.70ag – 0.30mn – 0.25mg – 0.25ti (A201.0-t7) Solution Heat Treated And Overaged
• SAE-AMS4215 – ALUMINUM ALLOY, CASTINGS 5.0SI – 1.2CU – 0.5MG (C355.0-T6) SOLUTION AND PRECIPITATION HEAT TREATED
• SAE-AMS4212 – Aluminum Alloy Castings, Sand 5.0si – 1.2cu – 0.50mg (355.0-t6) Solution And Precipitation Heat Treated
• SAE-AMS2804 – Identification Castings
• SAE-AMS2768 – Heat Treatment of Magnesium Alloy Castings
• SAE-AMS2362 – STRESS-RUPTURE PROPERTIES OF CASTINGS
• SAE-AMS2361 – ELEVATED TEMPERATURE TENSILE PROPERTIES OF CASTINGS
• SAE-AMS2360 – ROOM TEMPERATURE TENSILE PROPERTIES OF CASTINGS
• SAE-HIR1622 – Noise Control in Fluid Power Systems of Marine Vehicles (No S/S Document)
• SAE-J1174 – Engine Powdered Equipment, Small, Operator Ear Sound Level Measurement Procedure for
• SAE-J1166 – SOUND MEASUREMENT – OFF-ROAD SELF-PROPELLED WORK MACHINES OPERATOR-WORK CYCLE
• SAE-J1163 – SEAT, DETERMINING INDEX POINT
• SAE-J1074 – Engine Sound Level Measurement Procedure
• SAE-J1050 – View, Driver’s Field of, Describing and Measuring the
• SAE-J986 – Cars, Passenger, and Light Trucks, Sound Level for
• SAE-J925 – Machines, Off Road, Minimum Service Access Demensions for (No S/S Document)
• SAE-J919 – MACHINES, OFF-ROAD WORK, – OPERATOR – SINGULAR TYPE – SOUND MEASUREMENT
• SAE-J899 – WORK MACHINES, OFF-ROAD SELF-PROPELLED, OPERATOR’S SEAT DIMENSIONS FOR
• SAE-J898 – Machines, Off-Road Work, Control Locations for (See Notice of Withdrawal for Replacement Information)
• SAE-J833 – Human Physical Dimensions (No S/S Document)
• SAE-J680 – Instruments and Controls in Motor Truck Cabs, Location and Operation of
• SAE-J336 – Truck Cab Interior, Sound Level for
• SAE-J209 – Construction and Industrial Equipment, Instrument Face Design and Location for (No S/S Document)
• SAE-J184 – System, Acquisition, Qualifying A Sound Data
• SAE-J154 – Operator Space Envelope Dimensions for Off-Road Machines (No S/S Document)
• SAE-J88 – MACHINES, OFF-ROAD WORK, -EXTERIOR, SOUND MEASUREMENT
• SAE6906 – Standard Practice for Human Systems Integration
• SAE-ARP982 – Wrought Titanium Alloy Products, Minimizing Stress-corrosion Cracking In
• SAE-AMS-QQ-A-367 – Aluminum Alloy Forgings
• SAE-AMS-A-22771 – Aluminum Alloy Forgings, Heat Treated
• SAE-AMS-F-7190 – Forging, Steel, For Aircraft/Aerospace Equipment And Special Ordnance Applications
• SAE-AMS5881 – FORGINGS, ALLOY, CORROSION AND HEAT RESISTANT 59.5NI – 12CR – 10CO – 3.0MO – 6.0W – 3.0TI – 1.5TA – 4.5AL – 0.015B – 0.10Z – (0.30 – 0.35C) SOLUTION STABILIZED AND PRECIPITATION HEAT TREATED) (NO S/S DOCUMENT)
• SAE-AMS5704 – Nickel Alloy, Corrosion and Heat Resistant Forgings 57NI – 19.5CR- 13.5CO – 4.3MO – 3.OTI – 1.4A1 – 0.05ZR – 0.006B Consumable Electrode or Vacuum Induction Melted 1825 TO 1900 Deg. F (995 TO 1038 Deg. C) Solution, Stabilization, and Precipitation Heat Treated
• SAE-AMS5060 – Steel Bars, Forgings, and Tubing 0.13 – 0.18C (SAE 1015)
• SAE-AMS4984 – Forgings, Titanium Alloy, 10V – 2FE – 3AL Consumable Electrode Melted, Solution Heat Treated and Aged 173 KSI (1193 MPA) Tensile Strength
• SAE-AMS4983 – Forgings, Titanium Alloy, 10V – 2FE – 3AL Consumable Electrode Melted, Single-Step Solution Heat Treated and Aged 180 KSI (1241 MPA) Tensile Strength
• SAE-AMS4976 – Titanium Alloy, Forgings 6.0al – 2.0sn – 4.0zr – 2.0mo Solution And Precipitation Heat Treated
• SAE-AMS4363 – Forgings, Magnesium Alloy 2.0Th – 0.78Mn (HM21A – T5) Precipitation Heat Treated (No S/S Document)
• SAE-AMS4334 – Aluminum Alloy, Forgings 7.8ZN – 2.2MG – 1.6CU – 0.15CR (7249-T74 and T7452)
• SAE-AMS4321 – Aluminum Alloy Forgings 7.7zn – 2.5mg – 1.5cu – 0.16cr (7049-01) High Temperature Annealed
• SAE-AMS4320 – Aluminum Alloy Forgings 7.7zn – 2.5mg – 1.5cu – 0.16cr (7149-t73) Solution And Precipitation Heat Treated
• SAE-AMS4314 – Aluminum Alloy Rings, Rolled Or Forged 4.5cu – 0.85si – 0.80mn – 0.50mg (2014-t651, 2014-t652) Solution Heat Treated, Mechanically Stress Relieved, And Precipitation Heat Treated
• SAE-AMS4313 – Aluminum Alloy, Rolled Or Forged Rings 6.3cu – 0.30mn – 0.18zr – 0.10v – 0.06ti (2219-t351, 2219-t352) Solution Heat Treated And Mechanically Stress Relieved
• SAE-AMS4312 – Aluminum Alloy, Rolled Or Forged Rings 1.0mg – 0.60si – 0.28cu – 0.20cr (6061-t651, 6061-t652) Solution Heat Treated, Mechanically Stress Relieved, And Precipitation Heat Treated
• SAE-AMS4310 – Aluminum Alloy, Rolled Or Forged Rings 5.6zn – 2.5mg – 1.6cu – 0.23cr (7075-t651, 7075-t652) Solution Heat Treated, Mechanically Stress Relieved, And Precipitation Heat Treated
• SAE-AMS4248 – ALUMINUM ALLOY HAND FORGINGS AND ROLLED RINGS 1.0MG – 0.60SI – 0.28CU – 0.20CR (6061-T652) SOLUTION HEAT TREATED, STRESS RELIEF COMPRESSED, AND PRECIPITATION HEAT TREATED
• SAE-AMS4247 – Aluminum Alloy, Hand Forgings 7.7ZN – 2.4MG – 1.6CU – 0.16CR (7049-T7352) Solution Heat Treated, Stress Relieved By Compression, And Precipitation Heat Treated
• SAE-AMS4179 – Aluminum Alloy Forgings 5.6zn – 2.5mg – 1.6cu – 0.23cr (7175-t7452) Solution Heat Treated, Stress Relieved, And Precipitation Heat Treated
• SAE-AMS4149 – Aluminum Alloy, Die And Hand Forgings 5.6zn – 2.5mg – 1.6cu – 0.23cr (7175-t74) Solution And Precipitation Heat Treated
• SAE-AMS4148 – Aluminum Alloy Die Forgings (7175-T66) Solution and Precipitation Heat Treated
• SAE-AMS4147 – Aluminum Alloy Forgings 5.6zn – 2.5mg – 1.6cu – 0.23cr (7075-t7352) Solution Heat Treated, Stress Relieved By Compression, And Overaged
• SAE-AMS4146 – Aluminum Alloy Forgings and Rolled or Forged Rings 1.0MG – 0.60SI – 0.28CU – 0.20CR (6061-T4) Solution Heat Treated and Naturally Aged
• SAE-AMS4144 – Aluminum Alloy Hand Forgings And Rolled Rings 6.3CU – 0.30MN – 0.18ZR – 0.10V – 0.06TI (2219-T852/T851) Solution Heat Treated,Mechanically Stress Relieved, And Precipitation Heat Treated
• SAE-AMS4143 – Aluminum Alloy Forgings And Rolled Or Forged Rings 6.3cu – 0.30mn – 0.18zr – 0.10v – 0.60ti (2219-t6) Solution And Precipitation Heat Treated
• SAE-AMS4141 – Aluminum Alloy Die Forgings 5.6zn – 2.5mg – 1.6cu – 0.23cr (7075-t73) Solution And Precipitation Heat Treated
• SAE-AMS4140 – Aluminum Alloy Die Forgings 4.0cu – 2.0ni – 0.68mg (2018-t61) Solution And Precipitation Heat Treated
• SAE-AMS4134 – Aluminum Alloy Die Forgings 4.4CU – 0.85SI – 0.80MN – 0.50MG (2014-T4) Solution Heat Treated
• SAE-AMS4133 – Aluminum Alloy Forgings And Rolled Rings 4.4cu – 0.85si – 0.80mn – 0.50mg (2014-t6) Solution And Precipitation Heat Treated
• SAE-AMS4132 – Aluminum Alloy Die And Hand Forgings, Rolled Rings, And Forging Stock 2.3cu – 1.6mg – 1.1fe – 1.0ni – 0.18si – 0.07ti (2618-t61) Solution And Precipitation Heat Treated
• SAE-AMS4131 – Aluminum Alloy Forgings 5.6zn – 2.5mg – 1.6cu – 0.23cr (7075-t74) Solution Heat Treated And Aged
• SAE-AMS4130 – Aluminum Alloy Die Forgings 4.4cr – 0.85si – 0.80mn (2025-t6) Solution And Precipitation Heat Treated
• SAE-AMS4127 – Aluminum Alloy Forgings And Rolled Or Forged Rings (6061-t6) Solution And Precipitation Heat Treated
• SAE-AMS4126 – Aluminum Alloy Forgings 5.6zn – 2.5mg – 1.6cu – 0.23cr (7075-t6) Solution And Precipitation Heat Treated
• SAE-AMS4125 – Aluminum Alloy Die Forgings, And Rolled Or Forged Rings 0.90si – 0.62mg – 0.25cr (6151-t6) Solution And Precipitation Heat Treated
• SAE-AMS4111 – Aluminum Alloy Forgings 7.7ZN- 2.5MG – 1.5CU-0.16CR (7049-T73) Solution And Precipitation Heat Treated
• SAE-AMS4109 – ALUMINUM ALLOY HAND FORGINGS 5.6ZN – 2.5MG – 1.6CU – 0.24CR (7175-T736) (NO S/S DOCUMENT)
• SAE-AMS4108 – Aluminum Alloy Hand Forgings 6.2ZN – 2.3CU – 2.2MG – 0.12ZR (7050-T7452) Solution Heat Treated, Compression Stress Relieved, and Overaged
• SAE-AMS4107 – Aluminum Alloy Die Forgings 6.2ZN – 2.3CU – 2.2MG – 0.12ZR (7050-T74) Solution Heat Treated and Overaged
• SAE-AMS2808 – IDENTIFICATION FORGINGS
• SAE-AMS2375 – Control of Forgings Requiring First Article Approval
• SAE-J1995 – ENGINE POWER TEST CODE
• SAE-J1019 – Tests and Procedures for High Temperature Transmission Oil Hose, Engine Lubricating Oil Hose, and Hose Assemblies (No S/S Document)
• SAE-ARP892 – DC STARTER-GENERATOR, ENGINE
• SAE-HIR1063 – General Environmental Considerations for Marine Vehicles (S/S by SAE-J1777)
• SAE-J1777 – Marine Vehicles, General Environmental Considerations for
• SAE-J551 – RADIATION FROM VEHICLES AND DEVICES, (30 TO 1000 MHZ), PERFORMANCE LEVELS AND METHODS OF MEASUREMENT (NO S/S DOCUMENT)
• SAE-ARP1972 – Measurement Practices and Procedures Recommended for EMC Testing (No S/S Document)
• SAE-ARP1173 – TEST PROCEDURE TO MEASURE THE RF SHIELDING CHARACTERISTICS OF E.M.I. GASKETS
• SAE-HRP4382 – Hydraulic System Diagrams and Associated Tables for Marine Vehicles
• SAE-R424 – Composite Materials Handbook (CMH-17) Volume 3 Polymer Matrix Composites: Materials Usage, Design, and Analysis
• SAE-R423 – Composite Materials Handbook (CMH-17) Volume 2, Polymer Matrix Composites: Materials Properties
• SAE-R422 – Composite Materials Handbook (CMH-17) Volume 1, Polymer Matrix Composites: Guidelines for Characterization of Structural Materials
• SAE-ARP1927 – Epoxy and Addition Type Polyimides, Application of Direct Pressure to Resin in Curing of
• SAE-AMS4301 – BORON-ALUMINUM COMPOSITE SHEET 50 V/O 5.6B, 2024-0, FOR DIFFUSION BONDING (NO S/S DOCUMENT)
• SAE-AMS4300 – Aluminum, Boron, Composite Sheet 50 V/o 5.6b, 6061-0 For Diffusion Bonding
• SAE-AMS3912 – Radomes, Foam Sandwich Polyimide/Quartz Cloth Construction

Previous234Next