SAE規格の一覧

• SAE-ARP1675 – Aluminum Structures, Structural Weldbonding Of
• SAE-ARP1317 – ELECTRON BEAM WELDING (NO S/S DOCUMENT)
• SAE-AMS-STD-2219 – FUSION WELDING FOR AEROSPACE APPLICATIONS (NO S/S DOCUMENT)
• SAE-AMS-W-6858 – Welding, Resistance: Spot and Seam (No S/S Document)
• SAE-AMS2681 – ELECTRON-BEAM WELDING
• SAE-AMS2680 – WELDING, ELECTRON-BEAM, FOR FATIGUE CRITICAL APPLICATIONS
• SAE-AMS2672 – Aluminum, Brazing Torch or Furnace
• SAE-J121M – DECARBURIZATION IN HARDENED AND TEMPERED METRIC THREADED FASTENERS
• SAE-J121 – DECARBURIZATION IN HARDENED AND TEMPERED UNIFIED THREADED FASTENERS
• SAE-AS3062 – Bolts, Screws and Studs, Screw Thread Requirements
• SAE-HIR1559 – Pneumatic Systems, Bleed-Air, for Gas Turbine Equipped Marine and Amphibious Craft (S/S by SAE-J1775)
• SAE-GEIA-HB-649 – Configuration Management Standard Implementation Guide
• SAE-GEIA-859 – Data Management
• SAE-J2333 – Ship Systems and Equipment – Hydraulic Systems – Filter Selection Parameters
• SAE-J1775 – Gas Turbine Equipped Marine and Amphibious Craft, Pneumatic Systems, Bleed-Air, for
• SAE-J1559 – Measurement of Solar Heating Effect
• SAE-AS50881 – WIRING, AEROSPACE VEHICLE
• SAE-AS6500A – Manufacturing Management Program
• SAE-AS6496 – Fraudulent/Counterfeit Electronics Parts: Avoidance, Detection, Mitigation, and Disposition – Authorized/Franchised Distribution
• SAE-AS6174 – Counterfeit Materiel; Assuring Acquisition of Authentic and Conforming Materiel
• SAE-AS6171 – Test Method Standard; General Requirements, Suspect/Counterfeit, Electrical, Electronic, and Electromechanical Parts
• SAE-AS6081 – Parts, Electronic, Fraudulent/Counterfeit: Avoidance, Detection, Mitigation, and Disposition – Distributors Counterfeit Electronic Parts; Avoidance Protocol, Distributors
• SAE-J231 – Object, Falling, Protective Structive (FOPS), Minimum Performance Criteria for (No S/S Document)
• SAE-J98 – Machines, Industrial, Personnel Protection for General Purpose
• SAE-AS9100 – AEROSPACE REQUIREMENTS, QUALITY MANAGEMENT SYSTEMS
• SAE-AS9003 – Inspection and Test Quality Systems Requirements for Aviation, Space, and Defense Organizations
• SAE-AMS2371 – QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGINGS STOCK
• SAE-TA-STD-0017 – Product Support Analysis
• SAE-GEIA-STD-0007 – Logistics Product Data
• SAE-JA1012 – A Guide to the Reliability-Centered Maintenance (RCM) Standard
• SAE-JA1011 – Evaluation Criteria for Reliability-Centered Maintenance (RCM) Processes
• SAE-AS1390 – Level of Repair Analysis (LORA)
• SAE-AMS2817 – Packaging and Identification of Molded Elastomeric Seals and Sealing Components
• SAE-MAM2303 – Steel Cleanliness, Aircraft Quality Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure Metric (SI) Measurement (S/S by SAE-AMS2303)
• SAE-MAM2300 – Steel Cleanliness, Premium Aircraft-Quality Magnetic Particle Inspection Procedure, Metric (SI) Measurement (S/S by SAE-AMS2300)
• SAE-J423 – CASE DEPTH, METHODS OF MEASURING
• SAE-AS3071 – Acceptance Criteria – Magnetic Particle, Fluorescent Penetrant, And Contrast Dye Penetrant Inspection
• SAE-ARP4462 – Steel Parts, Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength
• SAE-ARP1923 – Inspectors, Etch, Qualification and Certification of
• SAE-AMS-STD-2175 – CASTINGS, CLASSIFICATION AND INSPECTION OF (SEE NOTECE 2 FOR REPLACEMENT INFORMATION)
• SAE-AMS-STD-2154 – Inspection, Ultrasonic, Wrought Metals, Process For
• SAE-AMS-I-83387 – Inspection Process, Magnetic Rubber
• SAE-AMS2645 – FLUORESCENT PENETRANT INSPECTION (S/S BY ASTM-E1417)
• SAE-AMS2643 – Titanium Alloys, Chemical Etch Inspection Procedure, Structural Examination of
• SAE-AMS2640 – MAGNETIC PARTICLE INSPECTION (NO S/S DOCUMENT)
• SAE-AMS2634 – Metal Tubing, Thin Wall, Ultrasonic Inspection
• SAE-AMS2633 – Cylinders, Steel Tubular, Centrifugally-Cast, Corrosion-Resistant, Ultrasonic Inspection
• SAE-AMS2632 – Inspection, Ultrasonic, of Thin Materials 0.50 Inch (12.7 MM) and Under in Cross-Sectional Thickness
• SAE-AMS2631 – Titanium and Titanium Alloy Bar and Billet, Ultrasonic Inspection
• SAE-AMS2630 – Inspection, Ultrasonic, Product Over 0.5 Inch (12.7 MM) Thick
• SAE-AMS2625 – PRESSURE TESTING, HYDRAULIC 2500 PSI (NO S/S DOCUMENT)
• SAE-AMS2620 – PRESSURE TESTING, HYDRAULIC 1000 PSI (NO S/S DOCUMENT)
• SAE-AMS2616 – PRESSURE TESTING, HYDRAULIC 200 PSI (NO S/S DOCUMENT)
• SAE-AMS2610 – Pressure Testing, Gaseous Media Pressure as Specified
• SAE-AMS2607 – PRESSURE TESTING 100 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2606 – PRESSURE TESTING 70 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2605 – PRESSURE TESTING 55 PSI (S/S BE SAE-AMS2610)
• SAE-AMS2604 – PRESSURE TESTING, GASEOUS MEDIA 40 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2602 – PRESSURE TESTING 25 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2601 – PRESSURE TESTING, GASEOUS MEDIA 10 PSI (S/S BY SAE-AMS2610)
• SAE-AMS2303 – Aircraft Quality Steel Cleanliness Martensitic Corrosion-Resistant Steels Magnetic Particle Inspection Procedure
• SAE-AMS2301 – Aircraft Quality, Steel Cleanliness Magnetic Particle Inspection Procedure
• SAE-AMS2300 – Aircraft Premium-Quality Steel Cleanliness Magnetic Particle Inspection Procedure
• SAE-AMS2175 – Casting, Classification And Inspection Of
• SAE-AS8700 – INSTALLATION AND TEST OF ELECTRONIC EQUIPMENT IN AIRCRAFT, GENERAL SPECIFICATION FOR
• SAE-AS478 – Identification Marking Methods
• SAE-AMS2825 – Material Safety Data Sheets (See Notice of Withdrawal for Replacement Information)
• SAE-AMS2800 – Identification Finished Parts
• SAE-AMS2762 – Steel, Carburizing, Carbon and Low-Alloy Parts
• SAE-AMS2759/7 – Carburizing and Heat Treatment of Carburizing Grade Steel Parts
• SAE-AMS2759/6 – Gas Nitriding and Heat Treatment of Low-Alloy Steel Parts
• SAE-AS12500 – Corrosion Prevention and Deterioration Control in Electronic Components and Assemblies
• SAE-AMS-STD-753 – Steel Parts, Corrosion-Resistant: Sampling, Inspection And Testing For Surface Passivation
• SAE-AMS-QQ-P-416 – Plating, Cadmium (Electrodeposited)
• SAE-AMS-QQ-C-320 – Chromium Plating (Electrodeposited) (S/S by SAE-AMS2460)
• SAE-AMS-QQ-N-290 – Nickel Plating (Electrodeposited)
• SAE-AMS-C-81769 – Metals, Chemical Milling of
• SAE-AMS-P-81728 – Plating, Tin-Lead (Electrodeposited)
• SAE-AMS-C-81562 – Coatings, Cadmium, Tin-Cadmium and Zinc (Mechanically Deposited)
• SAE-AMS-C-26074 – Electroless Nickel Coatings
• SAE-AMS-S-13165 – Shot Peening of Metal Parts (S/S by SAE-AMS2430)
• SAE-AMS-C-8837 – Coating, Cadmium (Vacuum Deposited)
• SAE-AMS-M-3171 – MAGNESIUM ALLOY, PROCESSES FOR PRETREATMENT AND PREVENTION OF CORROSION ON
• SAE-AMS5819 – Rod and Wire 62CO – 27CR – 2.9NI – 5.5MO, Hardfacing Cardfacing Caobalt Alloy, Corrosion and Heat Resistant
• SAE-AMS5788 – Cobalt Alloy, Corrosion and Heat-Resistant, Hard Facing Rods and Wire 62Co – 29Cr – 4.5W – 1.2C
• SAE-AMS5682 – Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 78Ni – 20Cr
• SAE-AMS2755 – Salt Bath, Molten, Nitriding (No S/S Document)
• SAE-AMS2700 – Steels, Passivation of Corrosion Resistant
• SAE-AMS2590 – Rotary Flap Peening of Metal Parts
• SAE-AMS2553 – CLEANING, PACKAGING, & ASSEMBLY OF CRITICAL SYSTEM COMPONENTS CLEAN AREA PROCEDURE, 2500 MICRON MAX PARTICLE SIZE (NO S/S DOCUMENT)
• SAE-AMS2552 – CLEANING, PACKAGING, & ASSEMBLY OF CRITICAL SYSTEM COMPONENTS CLEAN ROOM PROCEDURE, 500 MICRON MAX PARTICLE SIZE – 15 JAN 63
• SAE-AMS2550 – Treatment of Sheet Metal Parts Corrosion Resistant Steel
• SAE-AMS2516 – Polytetrafluoroethylene (PTFE) Resin Coating High Build, 370 Degrees – 400 Degrees C (698 Degrees – 752 Degrees F) Fusion
• SAE-AMS2515 – Polytetrafluoroethylene (PTFE) Resin Coating Low Build, 370 Degrees – 400 Degrees C (698 Degrees – 752 Degrees F) Fusion
• SAE-AMS2510 – Engine Gray Finishing Low Baking
• SAE-AMS2491 – Polytetrafluoroethylene, Preparation for Bonding, Surface Treatment of
• SAE-AMS2488 – Anodic Treatment – Titanium and Titanium Alloys Solution pH 13 or Higher
• SAE-AMS2486 – Conversion Coating of Titanium Alloys Fluoride-Phosphate Type
• SAE-AMS2485 – Coating, Black Oxide
• SAE-AMS2475 – Magnesium Alloys, Protective Treatments

12次へ