SAE規格の一覧

• SAE-AMS2472 – Aluminum Alloys Sulfuric Acid Process, Dyed Coating, Anodic Treatment of
• SAE-AMS2471 – Aluminum Alloys Sulfuric Acid Process, Undyed Coating, Anodic Treatment of
• SAE-AMS2470 – Aluminum Alloys Chromic Acid Process, Anodic Treatment of
• SAE-AMS2469 – Aluminum and Aluminum Alloys Processing and Performance Requirements, Hard Anodiic Coating Treatment of
• SAE-AMS2465 – Molybdenum and Molybdenum Alloys Pack Cementation Method, Disilicide Diffusion Coating of
• SAE-AMS2454 – Plating, Electroless Nickel, Codeposited with Polytetrafluoroethylene (PTFE)
• SAE-AMS2451/9 – Plating, Brush, Zinc-Nickel Low Hydrogen Embrittlement
• SAE-AMS2451/5 – Plating, Brush, Chromium Hard Deposit, Trivalent
• SAE-AMS2436 – Coating, Aluminum Oxide Detonation Deposition
• SAE-AMS2435 – Tungsten Carbide-Cobalt Coatings Detonation Process
• SAE-AMS2433 – Nickel-Thallium-Boron or Nickel-Boron Electroless Desposition, Plating
• SAE-AMS2430 – Shot Peening
• SAE-AMS2425 – Gold Plating – for Thermal Control
• SAE-AMS2424 – Plating, Nickel Low-Stressed Deposit
• SAE-AMS2421 – PLATING MAGNESIUM FOR SOLDERABILITY ZINC IMMERSION PROCESS (NO S/S DOCUMENT)
• SAE-AMS2420 – Aluminum for Solderability, Zinc Immersion Pre-Treatment Process, Plating of
• SAE-AMS2419 – Plating, Cadmium-Titanium
• SAE-AMS2418 – Copper Plating
• SAE-AMS2417 – Plating, Zinc-Nickel Alloy
• SAE-AMS2416 – Nickel-Cadmium Plating, Diffused
• SAE-AMS2415 – Lead and Indium Plating
• SAE-AMS2413 – Plating, Silver-Rhodium
• SAE-AMS2412 – Silver Plating Copper Strike, Low Bake
• SAE-AMS2411 – Silver Plating for High Temperature Applications
• SAE-AMS2410 – Plating, Silver Nickel Strike, High Bake
• SAE-AMS2409 – Plating, Immersion Tin for Aluminum Alloys
• SAE-AMS2406 – Chromium, Plating Hard Deposit
• SAE-AMS2405 – Nickel Plating, Electroless, Low Phosphorus
• SAE-AMS2404 – Nickel, Electroless, Plating
• SAE-AMS2401 – Plating, Cadium, Low Hydrogen Content Deposit
• SAE-AMS2400 – Plating, Cadmium
• SAE-MAM5401 – NICKEL ALLOY, CORROSION AND HEAT RESISTANT, INVESTMENT CASTINGS 62NI – 21.5CR – 9.0MO – 3.6CB VACUUM CAST AS CAST (NO S/S DOCUMENT)
• SAE-ARP1947 – Aluminum Alloy Castings, Dendrite Arm Spacing of Structural Aircraft Quality D357, Determination and Acceptance of
• SAE-AMS-T-81915 – Titanium and Titanium-Alloy Castings, Investment
• SAE-AMS-A-21180 – Aluminum-Alloy Castings, High Strength
• SAE-AMS7730 – Depleted Uranium Castings (No S/S Document)
• SAE-AMS7720 – LEAD ALLOY CASTINGS, 6.5SB – 0.5SN (NO S/S DOCUMENT)
• SAE-AMS5727 – STEEL FORGINGS, CORROSION & HEAT RESISTANT 16CR-25NI-6MO
• SAE-AMS5412 – Steel Castings, Vacuum Melted, Vacuum Cast, Investment, Corrosion Resistant 13CR – 8.0NI – 2.2MO – 1.1AL (195,000 PSI (1344 MPA) Tensile Strength (Condition H1000) Homogenized, Solution, and Precipitation Heat Treated
• SAE-AMS5408 – Alloy Castings, Centrifugal, Corrosion and Heat Resistant 64NI – 16CR – 15MO – 0.30A1 – 0.05LA Solution Heat Treated (No S/S Document)
• SAE-AMS5407 – Alloy Castings, Investment, Corrosion and Heat Resistant 60NI – 9.0CR – 10CO – 12.5W – 1.0CB – 2.0TI – 5.0AL – 0.015B – 0.06ZR Vacuum Melted, Vacuum Cast as Cast (No S/S Document)
• SAE-AMS5406 – Alloy Castings, Investment, Corrosion and Heat Resistant 3NI – 8.0CR – 10CO – 6.0MO – 1.0TI – 4.2TA – 60AL – 0.015B – 0.03ZR – 1.2HF Vacuum Melted, Vacuum Cast as Cast (No S/S Document)
• SAE-AMS5405 – Alloy Castings, Investment, Corrosion and Heat Resistant 64Ni – 8.0Cr – 10Co – 6.0Mo – 1.0Ti – 4.2Ta – 6.0Al – 0.015B – 0.08Zr Vacuum Melted, Vacuum Cast as Cast (No S/S Document)
• SAE-AMS5404 – Alloy Castings, Investment, Corrosion and Heat Resistant 59NI – 12.6CR – 9.0CO – 1.9MO – 4.2W – 4.0TI – 4.2TA – 3.4AL – 0.015B – 0.10ZR – 0.90HF Vacuum Melted, Vacuum Cast Solution and Precipitation Heat Treated (No S/S Document)
• SAE-AMS5403 – Alloy Castings, Investment, Corrosion and Heat Resistant 60NI – 14CR – 9.5CO – 4.0MO – 4.0W – 5.0TI – 3.0AL -0.015B – 0.06ZR Vacuum Melted, Vacuum Cast (No S/S Document)
• SAE-AMS5401 – Nickel Alloy Castings, Investment, Corrosion and Heat Resistant 62NI – 21.5CR – 9.0MO – 3.6CB (NB) Vacuum Melted, Vacuum Cast as Cast
• SAE-AMS5400 – Steel, Corrosion Resistant, Investment Castings 15CR – 4.6NI – 0.22CB – 2.8CU Solution and Precipitation Heat Treated (H935) 170 KSI (1172 MPA) Tensile Strength
• SAE-AMS5399 – Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 52NI – 19CR – 11CO – 9.8MO – 3.2TI – 1.6AL – 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
• SAE-AMS5398 – Steel, Corrosion Resistant, Sand and Centrifugal Castings 16Cr-4.1Ni-0.22Cb (Nb)- 2.8Cu Solution Heat Treated
• SAE-AMS5397 – Alloy Castings, Investment, Corrosion and Heat Resistant 50NI – 9.5CR – 15CO – 3.0MO – 4.8TI – 5.5AI – 0.015B – 0.95V – 0.06ZR Vacuum-Melted, Vacuum-Cast as Cast
• SAE-AMS5396 – Alloy, Nickel, Corrosion and Heat Resistant, Investment Castings 65NI – 28MO – 5.5FE – 0.40V (N-12MV) as Cast
• SAE-AMS5395 – Alloy Iron Castings, Ductile, Sand, Corrosion Resistant 22NI (2.5 – 3.0C) as Cast
• SAE-AMS5391 – Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73NI – 0.14C – 13CR – 4.5M0 – 2.3CB – 0.75TI – 6.0AL – 0.010B – 0.10ZR Vacuum Cast, as Cast
• SAE-AMS5390 – Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 47.5NI – 22CR – 1.5CO – 9MO – 0.60W – 18.5FE (N-12MV) as Cast
• SAE-AMS5388 – Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 53.3Ni-16.5Cr-17Mo-4.5W-5.8Fe-0.40V (CW-12MW) As Cast
• SAE-AMS5387 – Alloy Castings, Investment, Corrosion and Heat Resistant 60 CO -29CR – 4.5W AS CAST
• SAE-AMS5385 – Cobalt Alloy, Corrosion and Heat Resistant, Investment Castings 62Co-27Cr-2.8Ni-5.5Mo As Cast
• SAE-AMS5384 – Alloy Castings, Investment, Corrosion and Heat Resistant 53NI – 18CR – 18CO – 4.0MO – 2.9TI – 2.9AL – 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated
• SAE-AMS5383 – Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 52.5Ni – 19Cr – 3.0Mo – 5.1(Cb+Ta) – 0.90Ti – 0.60Al – 18Fe Vacuum Melted Homogenization and Solution Heat Treated
• SAE-AMS5382 – Cobalt Alloy, Corrosion and Heat Resistant, Investment Castings 54CO – 25.5CR – 10.5NI – 7.5W As Cast
• SAE-AMS5380 – Cobalt Alloy, Corrosion and Heat Resistant, Investment Castings 50.5Co-26Cr-15Ni-6.0Mo As Cast
• SAE-AMS5377 – Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 73NI – 12 CR – 4.5MO – 2.0CB – 0.70TI – 0.05C – 6.0AL – 0.010B – 0.10ZR Vacuum Cast, as Cast
• SAE-AMS5375 – Alloy Castings, Investment, Corrosion and Heat Resistant 65.5CO – 25CR – 1.8NI – 5.0W as Cast (No S/S Document)
• SAE-AMS5370 – Steel Corrosion and Heat Resistant, Investment Castings 19CR – 9.5 (CF-3) NI Solution Heat Treated
• SAE-AMS5368 – Steel Castings, Investment, Corrosion Resistant 15CR – 4.0NI – 2.3MO – 0.09N Solution Heat Treated
• SAE-AMS5366 – Steel, Corrosion and Heat Resistant, Investment Castings 25CR – 20NI (CK20) as Cast
• SAE-AMS5365 – Steel Castings, Sand, Corrosion and Heat Resistant 24.5CR – 20.5NI – Solution Heat Treated
• SAE-AMS5363 – Steel Castings, Sand and Centrifugal, Corrosion and Heat Resistant 18.5CR – 10.5NI – 0.90(CB+TA) Solution Heat Treated
• SAE-AMS5362 – Steel, Corrosion and Heat Resistant, Investment Castings 19CR – 12NI – 1.0(CB + TA) Solution Heat Treated
• SAE-AMS5360 – Steel, Corrosion and Heat Resistant, Investment Castings 17CR – 13NI – 1.9MO Solution Heat Treated
• SAE-AMS5359 – Steel Castings, Sand, Corrosion and Heat Resistant 15CR – 4.0NI – 2.3MO – 0.08N Solution Heat Treated (No S/S Document)
• SAE-AMS5357 – Steel, Corrosion Resistant, Investment Castings 15CR – 4.6NI – 0.22CB – 2.8CU Solution Heat Treated, Precipitation Hardenable
• SAE-AMS5356 – Steel, Corrosion Resistant, Investment Castings 15CR – 4.6NI – 0.22CB – 2.8CU Solution and Precipitation Heat Treated (H1100) 130 KSI (896 MPA) Tensile Strength
• SAE-AMS5355 – Steel, Corrosion Resistant, Investment Castings 16CR – 4.1NI – 0.28CB – 3.2CU Homogenization and Solution Heat Treated Or Homogenization, Solution, and Precipitation Heat Treated
• SAE-AMS5354 – Steel, Corrosion and Heat Resistant, Investment Castings 13CR – 2.0NI – 3.0W, Hardened and Tempered
• SAE-AMS5353 – Steel, Corrosion Resistant, Investment Castings 16CR – 1.8NI – 0.08N as Cast
• SAE-AMS5352 – Steel, Corrosion Resistant, Investment Castings 17CR – 0.55MO (0.95 – 1.20C) Annealed
• SAE-AMS5351 – Steel Castings, Sand, Corrosion and Moderate Heat Resistant 13CR Normalized and Tempered
• SAE-AMS5350 – Steel, Corrosion and Moderate Heat Resistant, Investment Castings 12.5Cr (SAE 51410) Hardened and Tempered
• SAE-AMS5349 – Steel Castings, Investment, Corrosion Resistant 13CR Free Machining, Hardened and Tempered
• SAE-AMS5347 – Steel, Corrosion-Resistant, Investment Castings 15Cr – 4.6Ni – 0.22Cb (Nb)- 2.8Cu Solution and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (15-5)
• SAE-AMS5344 – Steel, Corrosion-Resistant, Investment Castings 16Cr – 4.1Ni – 0.28Cb – 3.2Cu Homogenization, Solution and Precipitation Heat Treated (H900) 180 ksi (1241 MPa) Tensile Strength
• SAE-AMS5343 – Steel, Corrosion Resistant, Investment Castings 16Cr – 4.1Ni – 0.28Cb (Nb) – 3.2Cu Homogenization, Solution, and Precipitation Heat Treated (H1000) 150 ksi (1034 MPa) Tensile Strength (17-4)
• SAE-AMS5340 – Steel, Corrosion Resistant, Investment Castings 14CR – 4.25NI – 2.25MO – 0.25CB – 3.25CU Homogenization and Solution Heat Treated
• SAE-AMS5339 – Steel, Maraging, Investment Castings 17NI – 10CO – 4.6MO – 0.30TI – 0.06A1 Vacuum Melted, Homogenized, Overaged, and Solution Heat Treated
• SAE-AMS5338 – Steel, Investment Castings, 0.95Cr – 0.20Mo (0.35 – 0.45C) (SAE 4140 Mod) Normalized or Normalized and Tempered
• SAE-AMS5337 – Steel, Maraging, Investmetn Castings 18.5NI – 9.0CO – 5.0MO – 0.70TI – 0.12AL Vacuum Melted Homogenized, Overaged, and Solution Heat Treated
• SAE-AMS5336 – Steel, Investment Castings 0.95CR – 0.20MO (0.25 – 0.35C) (SAE 4130 MOD) Normalized or Normalized and Tempered
• SAE-AMS5335 – STEEL CASTINGS, SAND 0.65CR – 0.75NI – 0.20MO (0.25 – 0.33C) (SAE 8630 MODIFIED) NORMALIZED AND TEMPERED (NO S/S DOCUMENT)
• SAE-AMS5334 – Steel, Investment Castings 0.50CR – 0.55NI – 0.20MO (0.25 – 0.35C) (SAE 8630 Mod) Normalized and Tempered
• SAE-AMS5333 – Steel, Investment Castings, 0.50CR-0.55NI-0.25MO (0.11-0.17C) (SAE 8615) Normalized
• SAE-AMS5331 – STEEL CASTINGS, SAND 0.82CR – 1.8NI – 0.35MO (0.38 – 0.46C) (SAE 4340) NORMALIZED AND TEMPERED (NO S/S DOCUMENT)
• SAE-AMS5330 – Steel, Castings, Investment, 0.80 CR – 1.8NI – 0.35MO (0.38 – 0.46C) (SAE 4340 Modified) Annealed
• SAE-AMS5329 – STEEL CASTINGS, SAND 0.80CR – 1.8NI – 0.35MO (0.28 – 0.36C) (SAE 4330 MODIFIED) ANNEALED (NO S/S DOCUMENT)
• SAE-AMS5328 – Steel Castings, Investment, 0.80CR – 1.8NI – 0.35MO (0.28 – 0.36C) (SAE 4330 Modified) Annealed
• SAE-AMS4892 – Alloy Castings, Corrosion and Heat-Resistant 66Ni – 29Cu – 4.0Si As Cast
• SAE-AMS4890 – COPPER-BERYLLIUM ALLOY CASTINGS 97CU – 2.1BE – 0.52CO – 0.28SI SOLUTION HEAT TREATED (TBOO)
• SAE-AMS4880 – Aluminum Bronze Alloy, Centrifugal and Continuous-Cast Castings 81.5Cu – 10.3Al – 5.0Ni – 2.8Fe Quench Hardened and Temper Annealed (TQ50)
• SAE-AMS4862 – MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS 63CU – 24ZN – 6.2AL – 3.8MN – 3.0FE HIGH STRENGTH, AS CAST
• SAE-AMS4860 – MANGANESE BRONZE, SAND AND CENTRIFUGAL CASTINGS 58CU – 39ZN – 1.2FE – 1.0AL – 0.80MN AS CAST

前へ123次へ