FACR規格の一覧

• UL1479 – FIRE TESTS OF THROUGH-PENETRATION FIRESTOPS
• UL779 – FLOORINGS, ELECTRICALLY CONDUCTIVE
• UL698 – Industrial Control Equipment for use in Hazardous (Classified) Locations(See Notice of Withdrawal for Replacement Information)
• UL96A – INSTALLATION REQUIREMENTS FOR LIGHTING PROTECTION SYSTEMS
• UL96 – LIGHTNING PROTECTION COMPONENTS
• SMACNA-SRM – Manual Seismic Restraint: Guidelines for Mechanical Systems (See Notice of Withdrawal for Replacement Information)
• SAE-J1995 – ENGINE POWER TEST CODE
• SAE-J1019 – Tests and Procedures for High Temperature Transmission Oil Hose, Engine Lubricating Oil Hose, and Hose Assemblies (No S/S Document)
• SAE-ARP892 – DC STARTER-GENERATOR, ENGINE
• PPI-TR21 – THERMAL EXPANSION AND CONTRACTION IN PLASTIC PIPING SYSTEMS
• PPI-TN8.8 – Thermoplastic Pipe and Fittings, Making Threaded Joints with (No S/S Document)
• PFI-ES35 – BEVELS AND JOINT CONFIGURATIONS FOR BUTT WELDS, NONSYMETRICAL
• PFI-ES31 – PIPING ASSEMBLIES, PROTECTION OF ENDS OF FABRICATED, STANDARD FOR
• PFI-ES22 – COLOR CODING OF PIPING MATERIALS
• PFI-ES21 – INTERNAL MACHINING AND FIT-UP OF GTAW ROOT PASS CIRCUMFERENTIAL BUTT WELDS
• PFI-ES11 – PERMANENT MARKING ON PIPING MATERIALS
• PFI-ES7 – NOZZLES, WELDED, MINIMUM LENGTH AND SPACING FOR
• PFI-ES3 – FABRICATING TOLERANCES
• PFI-ES1 – INTERNAL MACHINING AND SOLID MACHINED BACKING RINGS FOR CIRCUMFERENTIAL BUTT WELDS
• NSF61 – COMPONENTS, DRINKING WATER SYSTEM – HEALTH EFFECT
• NSF37 – AIR CURTAINS FOR ENTRANCEWAYS IN FOOD SERVICE ESTABLISHMENTS
• NFPA1221 – FIRE SERVICE COMMUNICATION SYSTEMS, PUBLIC, INSTALLATION, MAINTENANCE, AND USE OF
• NFPA409 – AIRCRAFT HANGARS
• NFPA99 – FACILITIES, HEALTH CARE
• NFPA50 – Systems, Bulk Oxygen, at Consumer Sites (No S/S Document)
• NFPA32 – PLANTS, DRYCLEANING
• NFPA30 – FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE
• NFPA30A – AUTOMOBILE AND MARINE SERVICE STATION CODE
• NFPA24 – FIRE SERVICE, PRIVATE, MAINS AND THEIR APPURTENANCES
• NEMA-WC74 – ENERGY, ELECTRICAL, 5-46 KV SHIELDED POWER CABLE FOR USE IN THE TRANSMISSION AND DISTRIBUTION OF
• NEMA-WC71 – ENERGY, ELECTRICAL, NON-SHIELDED CABLES RATED 2001-5000 VOLTS FOR USE IN THE DISTRIBUTION OF
• NEMA-WC70 – NON-SHIELDED POWER CABLES RATED 2000 VOLTS OR LESS FOR THE DISTRIBUTION OF ELECTRICAL ENERGY
• NEMA-TP1 – GUIDE FOR DETERMINING ENERGY EFFICIENCY FOR DISTRIBUTION TRANSFORMERS
• NEMA-TC7 – DUCT, PLASTIC, SMOOTH-WALL COILABLE POLYETHYLENE ELECTRICAL
• NEMA-SG6 – Power Switching Equipment (No S/S Document)
• NEMA-SG5 – Power Switch Gear Assemblies (No S/S Document)
• NEMA-SG4 – CIRCUIT BREAKER, ALTERNATING-CURRENT HIGH- VOLTAGE
• NEMA-PE5 – CHARGERS, BATTERY, UTILITY TYPE
• NEMA-PE1 – POWER SYSTEMS, UNINTERRUPTIBLE
• NEMA-OS2 – BOXES, NONMETALLIC OUTLET, DEVICE BOXES, COVERS AND BOX SUPPORTS
• NEMA-MG2 – SAFETY STANDARD FOR CONSTRUCTION AND GUIDE FOR SELECTION, INSTALLATION, AND USE OF ELECTRIC MOTORS AND GENERATORS
• NEMA-LL1 – Procedures for Linear Fluorescent Lamp Sample Preparation and the TCLP (No S/S Document)
• NEMA-LE4 – LUMINAIRES, RECESSED; CEILING COMPATIBILITY
• NEMA-ICS10 – INDUSTRIAL CONTROL AND SYSTEMS: AC TRANSFER SWITCH EQUIPMENT
• NEMA-ICS7 – INDUSTRIAL CONTROL AND SYSTEMS: ADJUSTABLE SPEED DRIVES
• NEMA-ICS4 – TERMINAL BLOCKS, INDUSTRIAL CONTROL AND SYSTEMS
• NEMA-ICS3.1 – CONTRACTORS, AC GENERAL-PURPOSE MEDIUM VOLTAGE, AND CLASS E CONTROLLERS, 50 AND 60 HERTZ , INDUSTRIAL CONTROL AND SYSTEMS: HANDLING, STORAGE AND INSTALLATION GUIDE FOR
• NEMA-HV2 – INSULATORS, CERAMIC SUSPENSION, APPLICATION GUIDE FOR
• NEMA-FU1 – CARTRIDGE FUSES, LOW VOLTAGE
• NEMA-C12.10 – METERS, WATTHOUR
• NEMA-C12.1 – METERING, ELECTRICITY, CODE FOR
• NEMA-AB3 – CIRCUIT BREAKERS, MOLDED-CASE, AND THEIR APPLICATION
• NEMA-AB1 – Circuit Breakers, Molded-Case, Molded Case Switches, and Circuit-Breaker Enclosures (S/S by UL489)
• NEMA107 – RADIO INFLUENCE VOLTAGE (RIV) OF HIGH VOLTAGE APPARATUS, METHODS OF MEASUREMENT OF
• NAPHCC-NSPC – PLUMBING CODE – ILLUSTRATED
• NACE-RP0572 – Design, Installation, Operation and Maintenance of Impressed Current Deep Groundbeds (See Notice of Withdrawal for Replacement Information)
• NACE-RP0388 – Impressed Current Cathodic Protection of Internal Submerged Surfaces of Carbon Steel Water Tanks (See Notice of Withdrawal for Replacement Information)
• NACE-RP0288 – INSPECTION OF LININGS ON STEEL AND CONCRETE
• NACE-RP0274 – HIGH VOLTAGE ELECTRICAL INSPECTION OF PIPELINE COATINGS
• NACE-RP0196 – Galvanic Anode Cathodic Protection of Internal Submerged Surfaces of Steel Water Storage Tanks (See Notice of Withdrawal for Replacement Information)
• NACE-RP0193 – EXTERNAL CATHODIC PROTECTION OF ON-GRADE CARBON STEEL STORAGE TANK BOTTOMS
• NACE-RP0190 – External Protective Coatings for Joints, Fittings, and Valves on Metallic Underground or Submerged Pipelines and Piping Systems (See Notice of Withdrawal for Replacement Information)
• NACE-RP0188 – DISCONTINUITY (HOLIDAY) TESTING OF NEW PROTECTIVE COATINGS ON CONDUCTIVE SUBSTRATES
• NACE-RP0185 – Extruded, Polyolefin Resin Coating Systems with Soft Adhesives for Underground or Submerged Pipe (/see Notice of Withdrawal for Replacement Information)
• NACE-RP0178 – Fabrication Details, Surface Finish Requirements, and Proper Design Considerations for Tanks and Vessels to be Lined for Immersion Service (See Notice of Withdrawal for Replacement Information)
• NACE-RP0177 – Mitigation of Alternating Current and Lightning Effects on Metallic Structures and Corrosion Control Systems (See Notice of Withdrawal for Replacement Information)
• NACE-RP0169 – Control of External Corrosion on Underground or Submerged Metallic Piping Systems (See Notice of Withdrawal for Replacement Information)
• NAS3306 – Facility Requirements for Aircraft Operations
• MSS-SP104 – COPPER, WROUGHT, SOLDER JOINT PRESSURE FITTINGS
• MSS-SP88 – VALVES, DIAPHRAGM
• MSS-SP86 – VALVES, FLANGES, FITTINGS AND ACTUATORS, GUIDELINES FOR METRIC DATA IN STANDARDS FOR
• MSS-SP85 – CAST IRON GLOBE & ANGLE VALVES , FLANGED AND THREADED ENDS
• MSS-SP84 – Valves – Socket Welding and Threaded Ends (S/S by ASME-B16.34)
• MSS-SP81 – VALVES, FLANGED KNIFE GATE, STAINLESS STEEL, BONNETLESS
• MSS-SP78 – VALVES, CAST IRON PLUG, FLANGED AND THREADED ENDS
• MSS-SP73 – Brazing Joints for Copper and Copper Alloy Pressure Fittings (No S/S Document)
• MSS-SP67 – VALVES, BUTTERFLY
• MSS-SP54 – STEEL CASTINGS FOR VALVES, FLANGES AND FITTINGS AND OTHER PIPING COMPONENTS RADIOGRAPHIC EXAMINATION METHOD, QUALITY STANDARD FOR
• MSS-SP53 – STEEL CASTINGS AND FORGINGS FOR VALVES, FLANGES AND FITTINGS AND OTHER PIPING COMPONENTS MAGNETIC PARTICLE EXAM METHOD, QUALITY STANDARD FOR
• MSS-SP44 – STEEL PIPELINE FLANGES
• MSS-SP43 – FITTINGS, WROUGHT STAINLESS STEEL BUTT-WELDING
• ITU-V42BIS – DATA COMMUNICATION OVER THE TELEPHONE NETWORK: DATA COMPRESSION PROCEDURES FOR DATA CIRCUIT TERMINATING EQUIPMENT (DCE) USING ERROR CORRECTION PROCEDURES
• ITU-V32BIS – DATA COMMUNICATION OVER THE TELEPHONE NETWORK: A DUPLEX MODEM OPERATING AT DATA SIGNALING RATES OF UP TO 14 400 BIT(S) FOR USE ON THE GENERAL SWITCHED TELEPHONE NETWORK AND ON LEASED POINT-TO-POINT TWO-WIRE TELEPHONE-TYPE CIRCUITS
• ITU-V42 – DATA COMMUNICATION OVER THE TELEPHONE NETWORK: ERROR-CORRECTING PROCEDURES FOR DCES USING ASYNCHRONOUS-SYNCHRONOUS CONVERSION
• ITU-V34 – DATA COMMUNICATION OVER THE TELEPHONE NETWORK: A MODEM OPERATING AT DATA SIGNALING RATES OF UP TO 33,000 BIT(S) FOR USE ON THE GENERAL SWITCHED TELEPHONE NETWORK AND ON LEASED POINT-TO-POINT TWO-WIRE TELEPHONE-TYPE CIRCUITS
• ITU-BLUEBOOK – TELECOMMUNICATION POLICIES FOR THE AMERICAS (DATA COMMUNICATION OVER THE TELEPHONE NETWORK, SERIES V RECOMMENDATIONS (DDITT BLUE BOOK VOL. VIII FASCICLE VIII.1))
• ISO10763 – FLUID POWER, HYDRAULIC – PLAIN-END, SEAMLESS AND WELDED PRECISION STEEL TUBES – DIMENSIONS AND NOMINAL WORKING PRESSURES
• ISO7811-2 – CARDS, IDENTIFICATION – RECORDING TECHNIQUE – PART 2: MAGNETIC STRIPE – LOW COERCIVITY
• ISO7811-1 – IDENTIFICATION CARDS- RECORDING TECHNIQUES-PART 1: EMBOSSING
• ISO7810 – IDENTIFICATION CARDS PHYSICAL CHARACTERISTICS
• ISO7005 – METALLIC FLANGES-PART 2: CAST IRON FLANGES
• ISO5752 – METAL VALVES FOR USE IN FLANGED PIPE SYSTEMS FACE-TO-FACE AND CENTER-TO-FACE DIMENSIONS
• ISO5598 – FLUID POWER SYSTEMS AND COMPONENTS – VOCABULARY
• ISO5209 – GENERAL PURPOSE INDUSTRIAL VALVES – MARKING
• ISO5199 – TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS, CLASS II
• ISO4126 – SAFETY VALVES-PART 1: GENERAL REQUIREMENTS
• ISO2858 – END SUCTION CENTRIFUGAL PUMPS (RATING 16 BAR) DESIGNATION NOMINAL DUTY POINT AND DIMENSIONS
• ISO2551 – MACHINE-MADE TEXTILE FLOOR COVERINGS DETERMINATION OF DIMENSIONAL CHANGES DUE TO THE EFFECTS OF VARIED WATER AND HEAT CONDITIONS
• ISO262 – SCREW THREADS, METRIC, GENERAL-PURPOSE-SELECTED SIZES FOR SCREWS, BOLTS AND NUTS
• ISO228 – PIPE THREADS WHERE PRESSURE-TIGHT JOINTS ARE NOT MADE ON THE THREADS

12次へ