Skip to content
Toggle Navigation
ホーム
FSC
AIA
AIA/NAS規格一覧
ASTM
ASTMアニュアルブック
ASME
ASMEボイラーコード
SAE
SAE規格一覧
お気に入り
お問い合わせ
日本語
English
Search for:
8030 - Preservative and Sealing Compounds規格の一覧
554の規格があります
SAE-ARP1511 – CORROSION OF LOW-EMBRITTLING CADMIUM PLATE BY AIRCRAFT MAINTENANCE (S/S BY ASTM-F1111)
SAE-AMS-S-83318 – Sealing Compound, Polysulfide Type, Low Temperature Curing, Quick Repair, Integral Fuel Tanks and Fuel Cell Cavities
SAE-AMS-C-27725 – COATING, CORROSION PREVENTATIVE, POLYURETHANE FOR AIRCRAFT INTEGRAL FUEL TANKS FOR USE TO 250 DEG. F. (121 DEG. C.)
SAE-AMS-S-8802 – Sealing Compound, Temperature Resistant, Integral Fuel Tanks and Fuel Cell Cavities, High Adhesion
SAE-AMS-S-7916 – Compound, Sealing, Thread and Gasket, Fuel, Oil, and Water Resistant (No S/S Document)
SAE-AMS-S-7124 – Sealing Compound, Polysulfide, Accelerator Required, for Aircraft Structures
SAE-AMS-S-4383 – Sealing Compound, Topcoat, Fuel Tank, Buna-N Type
SAE-AMS5793 – Powder, Plasma Spray 95NI – 5AL
SAE-AMS5791 – Cobalt Alloy, Powder, Plasma Spray 56.5CO – 25.5CR – 10.5NI – 7.5W
SAE-AMS3381 – Sealing Compound, Aircraft Firewall, Non-Silicone
SAE-AMS3374 – Sealing Compound Aircraft Firewall
SAE-AMS3284 – Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates
SAE-AMS3281 – Sealing Compound, Polysulfide (T) Synthetic Rubber For Integral Fuel Tank and Fuel Cell Cavities Low Density (1.20 to 1.35 sp gr), for Intermittent Use to 360 Deg. F (182 Deg.C)
SAE-AMS3277 – Sealing Compound, Polythioether Rubber, Fast Curing Integral Fuel Tanks and General Purpose, Intermittent Use to 400 Mdf (204Mdc)
SAE-AMS3276 – Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 Deg. F (182 Deg. C)
SAE-AMS3269 – Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities High Strength, for Intermittent Use to 360 Deg. F (182 Deg. C)
SAE-AMS3136 – COATING MATERIAL, PHENOLIC RESIN, PTFE FILLED PIGMENTED, 150 DEG. C (302 DEG. F) CURE
SAE-AMS3100 – Adhesion Promoter for Polysulfide Sealing Compounds
SAE-AMS2535 – Microcircuits Coating, Vapor Deposited Poly-Monochloro-Para-Xylylene for
SAE-AMS2518 – Thread Compound, Anti-Seize, Graphite-Pertolatum
SAE-AIR4069 – Fuel Tanks, Sealing Integral
AWPA-P13 – CREOSOTE COAL TAR TO BE USED IN THE TREATMENT OF MARINE (COASTAL WATERS) PILES & TIMBERS STANDARD FOR
AWPA-P12 – Creosote-Coal Tar Solution to be used in the Treatment of Marine (Costal Waters) Piles and Timbers, Standard for (No S/S Document)
AWPA-P11 – Creosote-Pentachcorophenol Wood Preservative Solution, Standard for (No S/S Document)
AWPA-P9 – SOLVENTS & FORMULATION FOR ORGANIC PRESERVATIVE SYSTEMS, STANDARD FOR
AWPA-P8 – OIL-BORNE PRESERVATIVES
AWPA-P7 – Field Cuts, Creosote for Brush or Spray Treatment, Standard for (No S/S Document)
AWPA-P5 – Preservative, Waterborne, Standards for
AWPA-P4 – CREOSOTE, PETROLEUM OIL FOR BLENDING WITH, STANDARD FOR
AWPA-P3 – OIL SOLUTION, CREOSOTE-PETROLEUM, STANDARD FOR
AWPA-P2 – CREOSOTE & CREOSOTE SOLUTIONS, STANDARD FOR
AWPA-P1 – LAND & RESH WATER FOR COAL TAR CREOSOTE, STANDARD FOR
AWPA-M4 – Standard for the Handling, Storage, Field Fabrication and Field Treatment of Preservative-Treated Wood Products
AWPA-F6 – Factors and Correction Tables, Miscellaneous Conversion (No S/S Document)
AWPA-F5 – Salt Solutions, Preservative, Volume Correction Factors for (No S/S Document)
AWPA-F4 – Creosote-Petroleum Solutions, Standard Volume Correction Table for (No S/S Document)
AWPA-F1 – Creosote-Coal Tar Solution (up to 50 Percent Tar) and Coal Tar (Coke Oven Tar) Volume and Specific Gravity Correction Tables for Creosote (No S/S Document)
AWPA-A11 – TREATED WOOD & TREATING SOLUTIONS BY ATOMIC ABSORPTION SPECTROSCOPY
AWPA-A9 – WOOD, TREATED, & TREATING SOLUTIONS BY X-RAY SPECTROSCOPY, STANDARD METHOD FOR ANALYSIS OF
AWPA-A8 – Creosote or Creosote-Coal Tar Solution from Freshly Treated Piles, Poles, or Timber (Squeeze Method) Qualitative Recover of (No S/S Document)
AWPA-A7 – WOOD, PREPARING, FOR CHEMICAL ANALYSIS, STANDARD WET ASHING PROCEDURE FOR
AWPA-A6 – WOOD, OIL-TYPE PRESERVATIVES & WATER IN, METHOD FOR THE DETERMINATION OF
AWPA-A5 – PRESERVATIVES, OIL-BORNE, ANALYSIS OF, STANDARD METHODS FOR
AWPA-A4 – WOOD PRESERVATIVES, STANDARD METHODS FOR
AWPA-A3 – PENETRATION OF PRESERVATIVES & FIRE RETARDANTS, STANDARD METHODS FOR DETERMINING
AWPA-A2 – PRESERVATIVES, WATERBORNE, & FIRE RETARDANT FORMULATIONS, STANDARD METHODS FOR ANALYSIS OF
AWPA-A1 – CREOSOTE & OIL-TYPE PRESERVATIVES,STANDARD METHODS FOR ANALYSIS
ASTM-E759/E759M – Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
ASTM-D5363 – Anaerobic Single-Component Adhesives (AN)
ASTM-D4562 – ADHESIVES USING PIN-AND-COLLAR SPECIMEN, SHEAR STRENGTH OF
ASTM-D2825 – ASPHALT ROOF COATINGS, ALUMINUM PIGMENTED (S/S BY ASTM D2824-82)
ASTM-D2824/D2824M – Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos
ASTM-D1858 – CREOSOTE PETROLEUM SOLUTION (NO S/S DOCUMENT)
ASTM-D1625 – Arsenate, Chromated Copper (No S/S Document)
ASTM-D1272 – Pentachlorophenol (No S/S Document)
ASTM-D1190 – SEALER, CONCRETE JOINT, HOT-APPLIED ELASTIC TYPE (NO S/S DOCUMENT)
ASTM-D453 – Acids, Tar, in Cresote-Coal Tar Solutions, Standard Test Method for (No S/S Document)
ASTM-D391 – Creosote-Coal Tar Solution, Standard Specification for (No S/S Document)
ASTM-C1085 – SEALANTS, BUTYL RUBBER-BASED SOLVENT-RELEASE (NO S/S DOCUMENT)
ASTM-C920 – Sealants, Elastomeric Joint
ASTM-C834 – Latex Sealants
ASTM-C794 – Sealants, Joint, Elastomeric, Adhesion-in-Peel, Test Method for
ASTM-C793 – Sealants, Elastomeric Joint, Effects of Laboratory Accelerated Weathering on
ASTM-C792 – Sealants, Elastomeric, Effects of Heat Aging of Weight Loss, Cracking, and Chalking of
ASTM-C732 – Sealants, Latex, Artificial Weathering on, Aging Effects of
ASTM-C719 – Sealants, Elastomeric Joint, Under Cyclic Movement (Hockman Cycle). Adhesion and Cohesion of
ASTM-C679 – Sealants, Elastomeric, Tack-Free Time of
ASTM-C669 – METAL SASH, GLAZING COMPOUNDS FOR BACK BEDDING AND FACE GLAZING OF (NO S/S DOCUMENT)
ASTM-C661 – Sealants by Means of a Durometer, Elastomeric-Type, Indentation Hardness of
ASTM-C639 – Sealants, Elastomeric, Rheological (Flow) Properties of
ASTM-C603 – Sealants, Elastomeric, Extrusion Rate and Application Life of
ASTM-C570 – OIL- AND RESIN-BASE CAULKING COMPOUND FOR BUILDING CONSTRUCTION (NO S/S DOCUMENT)
ANSI-Z26.1 – SAFETY GLAZING MATERIALS FOR GLAZING MOTOR VEHICLES AND MOTOR VEHICLE EQUIPMENT OPERATING ON LAND HIGHWAYS
MIL-HDBK-696 – Plastic Coating Compound, Strippable, Hot and Cold Dip (No S/S Document)
MIL-HDBK-506 – Process for Coating, Pack Cementation, Chrome Aluminide
MIL-HDBK-341 – Coating, Aluminum and Silicon Diffusion, Process for
QPL-AMS-S-7124 – Sealing Compound, Polysulfide, Accelerator Required, for Aircraft Structures
QPL-AMS-S-4383 – Sealing Compound, Topcoat, Fuel Tank, Buna-N-Type (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
QPL-AMS3281 – SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES LOW DENSITY (1.35 SP GR MAX), FOR INTERMITTENT USE TO 360 DEG. F (182 DEG. C) (USERS MAY REFER TO PRI-QPL-AMS3281)
QPL-AMS3277 – SEALING COMPOUND, POLYTHIOETHER INTEGRAL FUEL TANKS AND GENERAL PURPOSE, FAST CURING INTERMITTENT USE TO 360 DEG. F (182 DEG. C) (USERS MAY REFER TO PRI-QPL-AMS3277)
QPL-AMS3276 – SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEG. F (182 DEG. C) (USERS MAY REFER TO PRI-QPL-AMS3276)
QPL-TT-P-595 – PRESERVATIVE COATING, CANVAS (NO S/S DOCUMENT)
QPL-TT-C-530 – COATING COMPOUND, RUST INHIBITIVE, FISH OIL BASE (NO S/S DOCUMENT)
QPL-TT-C-520 – COATING COMPOUND, BITUMINOUS, SOLVENT TYPE, UNDERBODY (FOR MOTOR VEHICLES)
QPL-85334 – Sealing Compound, Non-Curling, Low Consistency, Silicone, Groove Injection, for Integral Fuel Tanks (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
QPL-83982 – COMPOUND, SEALING, FLUID RESISTANT (NO S/S DOCUMENT)
QPL-0083933 – CORROSION PREVENTIVE COMPOUND, COLD APPLICATION (FOR MOTOR VEHICLES)
QPL-83455 – POTTING COMPOUND, TWO COMPONENT, RTV, FLUOROSILICONE (NO S/S DOCUMENT)
QPL-83430 – SEALING COMPOUND, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES, INTERMITTENT USE TO 360 DEG. F (182 DEG. C) (S/S BY QPL-AMS-3276)
QPL-83318 – SEALING COMPOUND, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES (NO S/S DOCUMENT)
QPL-83315 – SEALING COMPOUND, ALUMINUM STRUCTURE, PRESSURE AND WEATHER SEALING, LOW DENSITY (NO S/S DOCUMENT)
QPL-82633 – Compound, Polymeric Elastomer, Thermosetting (For Use as Bomb Tail Pad) (No S/S Document)
QPL-82604 – Compound, Asphaltic, High Melting Hot-Melt (Cavity Lining) (No S/S Document)
QPL-81904 – Coating Compound, Thermal Insulation, Ablative (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)
QPL-81733 – Sealing and Coating Compound, Corrosion Inhibitive (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
QPL-81732 – SEALING COMPOUND, ELECTRICAL, HIGH STRENGTH, ACCELERATOR REQUIRED (NO S/S DOCUMENT)
QPL-81309 – Corrosion Preventive Compounds, Water Displacing, Ultra-Thin Film (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
QPL-81287 – TAPE, PRESSURE-SENSITIVE ADHESIVE, ALUMINUM FOIL BACKED, FOR HIGH TEMPERATURE APPLICATION (NO S/S DOCUMENT)
QPL-62218 – CORROSION PREVENTIVE COMPOUNDS, COLD-APPLICATION (FOR NEW AND FIELDED MOTOR VEHICLES AND TRAILERS) (NO S/S DOCUMENT)
QPL-45021 – PLASTIC COATING COMPOUND, STRIPPABLE, COLD DIPPING 120 DEG., F. (49 DEG. C)
1
2
次へ
Page load link
Go to Top