AIA/NAS規格の一覧

• NAS412 – Foreign Object Damage/Foreign Object Debris (FOD) Prevention
• NAS3426 – CABLE ASSEMBLIES, ELECTRICAL HARNESS, PACKAGING OF
• NAS3417 – CABLE-CORD-WIRE, PACKAGING OF ELECTRICAL
• NAS855 – PACKAGING INDUSTRIAL STANDARD (S/S BY ASTM-D3951)
• NAS410 – NAS Certification and Qualification of Nondestructive Test Personnel
• NASM33540 – Safety Wiring, Safety Cabling, Cotter Pinning, General Practice for
• NAS10001 – Metric Units, Preferred, For Aerospace
• NAS1906THRUNAS1916 – RIVET, HI-SHEAR, 100 DEGREES HEAD INTERFERENCE FIT, TITANIUM ALLOY
• NAS1806THRUNAS1816 – Rivet, Hi-Shear, Flat Head, Interference Fit, Titanium Alloy – SEP 57 w/DOD Exceptions
• NAS519 – Gage, 100 Deg., Flat Head Stylus
• NAS363THRUNAS369 – Control, Rod and Tube Assembly, 5/16-24 UNF-3A Thread
• NAS4006 – Aluminum Coating
• NAS3306 – Facility Requirements for Aircraft Operations
• NAS411 – Hazardous Materials Target List
• NAS411 – Materials Hazardous Management Program
• NMA-MS1 – QUALITY STANDARDS FOR COMPUTER OUTPUT MICROFILM (NO S/S DOCUMENT)
• NASM20995 – Wire, Safety or Lock
• NAS3620 – PROPELLANTS, NITROGEN TETROXIDE (S/S BY MIL-P-26539)
• NAS1091 – Streamer Assembly, Warning
• NASM33781 – Recess-Offset Cruciform, Dimensions of Recess, and Driver for
• NASM21130 – Bolts, Self-Retaining, Positive Locking, CRES 90 KSI FTU, 63 KSI FSU, 100 Degrees Flush Head, 450 Degrees F and 650 Degrees F
• NASM21132 – Wrenching Element, External Hexagon for Threaded Fasteners
• NASM33750 – Recess-Dovetail Slot and Conical Dovetail Slot, Dimensions of Recess, Gage and Driver for
• NASM1515 – Fastener Systems For Aerospace Applications
• NASM14191 – Recess-Offset Cruciform Ribbed Dimensions of Recess, Gage and Driver for
• NASM17855 – Fasterners, Screw Threaded, Descriptive Factor Symbols And Order Of Notes For Enigineering Documents
• NASM1312-31 – Fastener Test Methods Method 31, Torque
• NASM1312-32 – Fastener Test Method, Method 32, Barrel Nut Test
• NASM1312-30 – Fastener Test Methods Method 30, Sheet Pull-Up of Blind Fasteners
• NASM1312-27 – Fastener Test Methods Method 27, Panel Fastener Sheet Pull-Up
• NASM1312-28 – Fastener Test Methods Method 28, Elevated Temperature Double Shear
• NASM1312-29 – Fastener Test Methods Method 29 Measurement Techniques for Determining Shank Expanding Characteristics of Deformable Fasteners
• NASM1312-24 – Fastener Test Methods Method 24 Receptacle Torque-Out, Panel Fasteners
• NASM1312-25 – Fastener Test Methods Method 25 Driving Recess Torque Quality Conformance Test
• NASM1312-26 – Fastener Test Methods Method 26 Structural Panel Fastener Lap Joint Shear
• NASM1312-21 – Fastener Test Methods Method 21 Shear Joint Fatique Constant Amplitude
• NASM1312-22 – Fastener Test Methods Method 22 Receptacle Push-Out, Panel Fasteners
• NASM1312-23 – Fastener Test Methods Method 23 Tensile Strength of Panel Fasteners
• NASM1312-18 – Fastener Test Methods Method 18 Elevated Temperature Tensile Strength
• NASM1312-19 – Fastener Test Methods Method 19 Fastener Sealing
• NASM1312-20 – Fastener Test Methods Method 20 Single Shear
• NASM1312-15 – Fastener Test Methods Method 15 Torque – Tension
• NASM1312-16 – Fastener Test Methods Method 16 Clamping Force for Installation Formed Fasteners
• NASM1312-17 – Fastener Test Methods Method 17 Stress Relaxation
• NASM1312-12 – Fastener Test Methods Method 12 Thickness of Metallic Coatings
• NASM1312-13 – Fastener Test Methods Method 13 Double Shear Test
• NASM1312-14 – Fastener Test Methods Method 14 Stress Durability Internally Threaded Fasteners
• NASM1312-9 – Fastener Test Methods Method 9 Stress Corrosion
• NASM1312-10 – Fastener Test Methods Method 10 Stress Rupture
• NASM1312-11 – Fastener Test Methods Method 11 Tension Fatigue
• NASM1312-6 – Fastener Test Methods Method 6 Hardness
• NASM1312-7 – Fastener Test Methods Method 7 Vibration
• NASM1312-8 – Fastener Test Methods Method 8 Tensile Strength
• NASM1312-3 – Fastener Test Methods Method 3 Humidity
• NASM1312-4 – Fastener Test Methods Method 4 Lap Joint Shear
• NASM1312-5 – Fastener Test Methods Method 5 Stress Durability
• NASM1312 – FASTENER TEST METHODS
• NASM1312-1 – Fastener Test Methods, Method Method 1 Salt Spray
• NASM1312-2 – Fastener Test Methods Method 2 Interaction
• NAS7100 – Recess, Ribbed Cruciform, Dimensions of Recess and Gages
• NAM1312-113 – Fastener Test Methods, Metric Method 113 Double Shear Test
• NAS1347 – FASTENERS, IDENTIFICATION OF MALE THREADED
• NAM1312-108 – Fastener Test Methods Metric Method 108 Tensile Strength
• NAM1312-109 – FASTENER TEST METHODS, METRIC METHOD 109 STRESS CORROSION
• NAM1312-111 – Fastener Test Methods, Metric Method 111 Tension Fatigue
• NA0156 – Male Threaded Fasteners, Metric Design Parameters for
• NAM1312-105 – Fastener Test Methods Metric Method 105 Stress Durability
• NAM1312-107 – Fastener Test Methods, Metric Method 107 Vibration
• NA0025 – Recess, Offset Cruciform, Dimensions of Recess, Gage and Drive, Metric
• NA0026 – FASTENERS, METRIC, A-286 CRES EXTERNALLY THREADED 1100 MPA TENSILE 660 MPA SHEAR
• NA0057 – FASTENERS, METRIC, ALLOY STEEL EXTERNALLY THREADED 1250 MPA TENSILE 750 MPA SHEAR
• NA0007 – FASTENERS, METRIC, TITANIUM ALLOY EXTERNALLY THREADED 1100 MPA TENSILE 660 MPA SHEAR
• NA0008 – Fasteners, Metric Alloy Steel Externally Threaded 1100 MPA Tensile 660 MPA Shear
• NAS1195 – Shim, Miniature Anchor Nut
• NAS1056 – Spacer, Sleeve – Rivet, High Temperature, Non Magnetic
• NAS1057 – Spacer, Sleeve – Screw and Bolt, High Temperature, Non Magnetic
• NAS186 – Spacer, Stepped, Swage Type
• NAS42 – Spacer, Sleeve – Rivet
• NAS43 – Spacer, Sleeve – Screw and Bolt
• NAS47 – Spacer, Sleeve, Non Metallic, Screw and Bolt
• NASM91531 – Knobs, Control, Round, Plastic (with Fluted Grip)
• NASM91524 – Knobs, Control, Short Bar, Metal and Plastic
• NASM91525 – Knobs, Control, Bar, Metal and Plastic
• NASM91528 – Knobs-Control, Plastic (Round, Concentric, Pointer, Spinner, Spinner Slip-Clutch, Bar, Tactile, Knob Lock Pointer, Slip-Clutch, and Knob Locks)
• NASM90120 – Knobs, Control, Bar, Plastic
• NASM91522 – Knob, Control, Crank, Metal
• NASM91523 – Knob, Control, Lever, Metal
• NASM28728-6 – Dial, Control, Multiturn Counters, Three Digits, Illuminated and Non-Illuminated
• NASM28728-7 – Dial, Control, Multiturn Counters, 100 Turn Counters, 4 Digit
• NASM28728-8 – Dial, Control, Multi-Turn Counters, Vernier, .88 Diameter
• NASM28728-4 – Dial, Control, Multiturn Counters, Vernier, 1.16 Diameter
• NASM28728-5 – Dial, Control, Multiturn Counters, Three Digits
• NASM28728-3 – Dial, Control, Multiturn Counters, 10-Turn Counter, Concentric (1.810-Inch Diameter)
• NASM28728 – Dial, Control, Multi-Turn Counters General Specification for
• NASM28728-1 – Dial, Control, Multiturn Counters, Vernier, 1.81 Diameter
• NASM28728-2 – Dial, Control, Multiturn Counters, Vernier, 1.75 Diameter
• NASM21386 – Knob, Round, Concentric, Illuminated and Non-Illuminated
• NASM21387 – Knob-Round, Illuminated and Non Illuminated, Small
• NASM25049 – Knobs, Control, Electronic Equipment, General Specification for
• NASM21383 – Knob-Radial Indicator, Illuminated and Non-Illuminated

12次へ