PACK規格の一覧

• SAE-AMS2817 – Packaging and Identification of Molded Elastomeric Seals and Sealing Components
• RMI-III-03 – Steel Storage Racks, Industrial, Specification for the Design, Testing and Utilization of (S/S by ANSI-MH16.1)
• NAS3426 – CABLE ASSEMBLIES, ELECTRICAL HARNESS, PACKAGING OF
• NAS3417 – CABLE-CORD-WIRE, PACKAGING OF ELECTRICAL
• NAS855 – PACKAGING INDUSTRIAL STANDARD (S/S BY ASTM-D3951)
• MHIA-MH16.1 – Steel Industrial Storage Racks, Design, Testing and Utilization of
• MCA-L1 – CHEMICALS HAZARDOUS, GUIDE TO PRECAUTIONARY LABELING OF (SUPERSEDED BYANSI Z129.1-76)
• ISO/IEC-16388 – Information Technology – Automatic Identification and Data Capture Techniques – Code 39 Bar Code Symbology
• ASTM-E619 – Odors in Paper Packaging, Evaluating Foreign, Standard Practice for
• ASTM-E462 – Odor and Taste Transfer from Packaging Film (No S/S Document)
• ASTM-E96 – Water Vapor Transmission Of Materials
• ASTM-D5445 – Pictorial Markings for Handling Goods
• ASTM-D5105 – Tapes, Pressure Sensitive, Using Concentrated Natural Sunlight, Performing Accelerated Outdoor Weathering of
• ASTM-D4919 – Testing of Hazardous Materials (Dangerous Goods) Packagings
• ASTM-D4675 – Materials, Flat Strapping, Selection and Use of
• ASTM-D4169 – Containers and Systems, Shipping, Performance Testing of
• ASTM-D3953 – Steel And Seals, Flat, Strapping
• ASTM-D3951 – Packaging, Commercial
• ASTM-D3950 – Nonmetallic, Strapping, (and Joining Methods)
• ASTM-D3889 – Tape, Pressure-Sensitive, at Low Temperature, Adherence to Linerboard of  (S/S by ASTM-D3889/D3889M)
• ASTM-D3889/D3889M – Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
• ASTM-D3812 – TAPE, PRESSURE SENSITIVE, IMPACT RESISTANCE OF
• ASTM-D3811 – Tapes, Pressure-Sensitive, Unwind Force of  (S/S by ASTM-D3811/D3811M)
• ASTM-D3811/D3811M – Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
• ASTM-D3503 – WOOD PRODUCTS, COMPRESSED, SWELLING AND RECOVERY OF, DUE TO MOISTURE ABSORPTION (NO S/S DOCUMENT)
• ASTM-D3502 – WOOD PRODUCTS, MOISTURE ABSORPTION OF COMPRESSED (NO S/S DOCUMENT)
• ASTM-D3330/D3330M – Tape, Pressure Sensitive, Peel Adhesion of
• ASTM-D2221 – Package Cushioning Materials, Creep Properties Of
• ASTM-D1968 – Paper and Paper Products, Standard Terminology Relating to (No S/S Document)
• ASTM-D1596 – Material, Packaging, Dynamic shock Cushioning Characteristics of
• ASTM-D1531 – Relative Permittivity (Dielectric Constant) and Dissipation Factor by Fluid Displacement Procedures (No S/S Document)
• ASTM-D1424 – Fabrics by Falling-Pendulum Type (Elmendorf) Apparatus, Tearing Strength of
• ASTM-D1310 – Liquids by Tag Open-Cup Apparatus, Flash Point and Fire Point of Apparatus
• ASTM-D1276 – CONTAINERS, SHIPPING, STANDARD METHOD OF TEST FOR WATER VAPOR PERMEABILITY, BY CYCLE METHOD – 18 JUM 68
• ASTM-D1185 – Pallets and Related Structures Employed in Materials Handling and Shipping
• ASTM-D1175 – TEXTILE FABRICS, (OSCILLATORY CYLINDER AND UNIFORM ABRASION METHODS), ABRASION RESISTANCE OF (NO S/S DOCUMENT)
• ASTM-D1008 – WATER VAPOR TRANSMISSION OF SHIPPING CONTAINERS (NO S/S DOCUMENT)
• ASTM-D997 – CONTAINERS, LOADED CYLINDRICAL, DROP TEST FOR (NO S/S DOCUMENT)
• ASTM-D996 – Environments, Packaging and Distribution
• ASTM-D951 – Water Resistance of Shipping Containers by Spray Method
• ASTM-D895 – Water Vapor Permeability of Packages (No S/S Document)
• ASTM-D782 – Containers, Shipping, in Revolving Hexagonal Drum, Standard Test Method of (No S/S Document)
• ASTM-D781 – PUNCTURE AND STIFFNESS OF PAPERBOARD, AND CORRUGATED AND SOLID FIBERBOARD (NO S/S DOCUMENT)
• ASTM-D645 – PAPER & PAPERBOARD, THICKNESS OF – 8 SEP 67
• ASTM-D642 – Containers, Shipping, Components, and Unit Loads, Determining Compressive Resistance of
• ASTM-D276 – Fibers in Textiles, Identification of
• ASTM-C148 – Glass, Containers, Polariscopic Examination of
• ASTM-B660 – Standard Practices for Packaging of Aluminum and Magnesium Products
• ASME-MH1.4.1M – Pallets, Procedures for Testing (See Notice of Withdrawal for Replacement Information)
• ASME-MH1.2.2M – Pallet Sizes (See Notice of Withdrawal for Replacement Information)
• ANSI-Z129.1 – Chemicals, Hazardous Industrial, Precautionary Labeling of (See Notice of Withdrawal for Replacement Information)
• ANSI-MH16.1 – Steel Industrial Storage Racks, Design, Testing and Utilization of (S/S by MHIA-MH16.1)
• ANSI-MH10.6M – Vehicles, for Surface and Air, Unit-Load Heights for Palletized Loads (No S/S Document)
• ANSI-MH1.1.2 – Definitions and Terminology Covering Pallets and Related Structures (Incorporated  into ASME-MH1)
• ANSI-MH1 – Pallets, Slip Sheets, and Other Bases for Unit Loads
• AIM-BC1 – Uniform Symbology Specification Code 39 (S/S by ISO/IEC-16388)
• MIL-HDBK-775 – Foam-in-Place Packaging, Procedures for
• MIL-HDBK-774 – Palletized Unit Loads (S/S by MIL-STD-147)
• MIL-HDBK-773 – Electrostatic Discharge Protective Packaging
• MIL-HDBK-772 – Military Packaging Engineering (No S/S Document)
• MIL-HDBK-770 – Shrink Film/Stretch Film in Military Packaging (S/S by ASTM-D4649, ASTM-D5331, ASTM-D5414, ASTM-D5415, ASTM-D5416, ASTM-D5458, ASTM-D5459)
• MIL-HDBK-769 – Standard Size Unit, Intermediate and Exterior Containers for Modular Packaging and Unitization on the 40 Inch X 48 Inch Pallet (No S/S Document)
• MIL-HDBK-768 – Rigid Polyurethane Foam Packaging Design (No S/S Document)
• MIL-HDBK-758 – Special Handling Data/Certification for Shipments via Military Aircraft (No S/S Document)
• MIL-HDBK-701 – Blocking, Bracing and Skidding of Industrial Plant Equipment for Shipment and Storage (No S/S Document)
• MIL-HDBK-304 – Package Cushioning Design
• MIL-HDBK-157 – Transportability Criteria (S/S by MIL-STD-1366)
• MIL-HDBK-129 – Military Marking (S/S by MIL-STD-129)
• FED-STD-804 – PACKAGING OF DUCK FABRICS (COTTON; SYNTHETIC FIBER; COTTON-SYNTHETIC FIBER BLENDS) (NO S/S DOCUMENT)
• FED-STD-803 – PACKAGING OF COTTON AND COTTON-SYNTHETIC FIBER BLEND FABRICS (EXCLUDING DUCK FABRICS) (NO S/S DOCUMENT)
• FED-STD-802 – PACKAGING OF SYNTHETIC FIBER FABRICS (NO S/S DOCUMENT)
• FED-STD-356 – Commercial Packaging of Supplies and Equipment (Use MIL-STD-1188)
• FED-STD-123 – Marking for Shipment (Civil Agencies)
• FED-STD-102 – PRESERVATION, PACKAGING, AND PACKING LEVELS (S/S BY MIL-P-116 AND MIL-STD-2073)
• FED-STD-101 – TEST PROCEDURES FOR PACKAGING MATERIALS (CHANGE NOTICES 1 THRU 3 ARE INCORPORATED IN WITH REVISION C) (S/S BY MIL-STD-3010)
• FED-STD-75 – GLOSSARY OF PACKAGING TERMS
• PPP-B-2920 – BOILERS AND RELATED EQUIPMENT; PACKAGING OF (NO S/S DOCUMENT)
• PPP-G-2919 – GENERATOR SETS, MOBILE ELECTRIC POWER AND SUPPLEMENTAL EQUIPMENT; PACKAGING OF (NO S/S DOCUMENT)
• PPP-C-2020 – Chemicals, Liquid, Dry, and Paste: Packaging of
• PPP-P-2008 – PREPARATION FOR DELIVERY REQUIREMENTS FOR PARTITIONS, OFFICE, STEEL (NO S/S DOCUMENT)
• PPP-P-1998 – PREPARATION FOR DELIVERY REQUIREMENTS FOR STORAGE SECTIONS, OVERFILE, STEEL (NO S/S DOCUMENT)
• PPP-P-001946 – PACKAGING AND PACKING OF STEEL CREDENZA FURNITURE (NO S/S DOCUMENT)
• PPP-P-001944 – PACKAGING AND PACKING OF LATERAL FILING CABINETS, STEEL, GENERAL OFFICE (NO S/S DOCUMENT)
• PPP-P-001941 – PACKAGING AND PACKING OF CARRELS, DESK TOP, STEEL (NO S/S DOCUMENT)
• PPP-P-001938 – PACKAGING AND PACKING OF OFFICE PARTITIONS, PORTABLE, FABRIC COVERED (NO S/S DOCUMENT)
• PPP-P-1937 – PREPARATION FOR DELIVERY REQUIREMENTS FOR DESKS, STEEL, FLAT TOP, CONTEMPORARY STYLE (NO S/S DOCUMENT)
• PPP-P-1899 – PREPARATION FOR DELIVERY REQUIREMENTS FOR TABLES, STEEL, GENERAL OFFICE (NO S/S DOCUMENT)
• PPP-P-1892 – PAINT, VARNISH, LACQUER, AND RELATED MATERIALS; PACKAGING, PACKING, AND MARKING OF (NO S/S DOCUMENT)
• PPP-P-1892 – PAINT, VARNISH, LACQUER, AND RELATED MATERIALS: PACKAGING, PACKING, AND MARKING OF (NO S/S DOCUMENT)
• PPP-P-1882 – PREPARATION FOR DELIVERY REQUIREMENTS FOR TEMPLATES, TRIANGLES, CURVES, PROTRACTORS AND RELATED DRAFTING AIDS (NO S/S DOCUMENT)
• PPP-P-1877 – PACKAGING AND PACKING OF WOOD OFFICE FURNITURE (NO S/S DOCUMENT)
• PPP-P-1875 – PREPARATION FOR DELIVERY REQUIREMENTS FOR CHAIRS, METAL AND PLASTIC, OFFICE (NO S/S DOCUMENT)
• PPP-P-1656 – PACKING AND PACKAGING, FLUORESCENT LIGHT FIXTURES (NO S/S DOCUMENT)
• PPP-H-1581 – Hardware (Fasteners and Related Items), Packaging of (S/S by ASTM-D3951 or Mil-Std-2073-)
• PPP-T-001471 – Tool Equipment TE-49, Packaging, Packing and Marking of (No S/S Document)
• PPP-T-001470 – Tool Equipment TE-73, Packaging, Packing and Marking of (No S/S Document)
• PPP-A-1182 – ALUMINUMWARE, BAKESHOP AND KITCHEN, PACKAGING, PACKING, AND MARKING OF (NO S/S DOCUMENT)
• PPP-T-1150 – TOOLS AND TOOL ACCESSORIES FOR POWER DRIVEN, METAL AND WOODWORKING, MACHINERY, PACKAGING AND PACKING OF (S/S BY PPP-P-40)
• PPP-P-1136 – PACKAGING OF COATED (PLASTIC; RUBBER) AND LAMINATED FABRICS (NO S/S DOCUMENT)
• PPP-P-1132 – PACKAGING OF WOOLEN, WORSTED AND WOOL BLEND (SYNTHETIC FIBER; COTTON) FABRICS (NO S/S DOCUMENT)

12次へ