MISC規格の一覧

• AN526 – Screw, Machine, Truss Head (Use MS35206, MS35207, MS35218, MS35219, MS51957 and MS51958)
• AN520 – SCREW, MACHINE, ROUND HEAD, FINE THREAD (USE MS 35207, MS35215, MS35219 AND MS51958
• AN515 – SCREW, MACHINE, ROUND HEAD, COARSE THREAD (USE MS-35206, MS-35214, MS-35218, MS-51957)
• AN509 – SCREW-MACHINE, FLAT HEAD, 100 DEG., STRUCTURAL (S/S BY MS 24694)
• AN507 – SCREW, MACHINE, FLAT HEAD, 100 DEGREE (S/S BY MS 24693)
• AN427 – RIVET, 100 DEG. COUNTERSUNK HEAD, STEEL, MONEL AND COPPER (USE MS-20427)
• AN365 – NUT, SELF&LOCKING, 250 DEG. F (S/S BY MS&20365)
• AN115 – SHACKLE-WIRE ROPE (S/S BY MS20115)
• ANA-BUL-446 – PROCEDURE FOR SUBMITTAL AND LISTING OF INDUSTRY SPECIFICATIONS AND STANDARDS IN ANA BULLETIN NO. 147 (NO S/S DOCUMENT)
• ANA-BUL-445 – ENGINEERING CHANGES TO WEAPONS, SYSTEMS, EQUIPMENTS AND FACILITIES (S/S BY MIL-STD-480 AND MIL-STD-481)
• ANA-BUL-444 – ELECTRONIC EQUIPMENT, PILOTED AIRCRAFT, DESIGN CRITERIA FOR
• ANA-BUL-441 – AERONAUTICAL USE OF LIMITATION NOTICES ON FEDERAL AND MILITARY SERIES SPECIFICATIONS AND STANDARDS
• ANA-BUL-440 – TYPE DESIGNATION SYSTEM FOR AERONAUTICAL AND SUPPORT EQUIPMENT (S/S BY MIL-STD-875)
• ANA-BUL-437 – PROCEDURE FOR AIRFRAME CONTRACTOR S PURCHASE OF SUPPLY ITEMS REQUIRING QUALIFICATION TESTS
• ANA-BUL-436 – QUALITY STANDARDS FOR AIRCRAFT TIRES AND TUBES (S/S BY MIL-STD-698)
• ANA-BUL-435 – INSPECTION STANDARDS FOR STAND & DISSECTION TESTED NON SELF SEALING TYPE CELLS (S/S BY MIL-STD-801)
• ANA-BUL-434 – AGE CONTROLS OF AGE SENSITIVE ELASTOMERIC ITEMS (S/S BY MIL-STD-801)
• ANA-BUL-433 – OVERCODING OF STANDARD DRAWINGS
• ANA-BUL-432 – ATMOSPHERIC PROPERTIES – POLAR AND TROPICAL ATMOSPHERES, STANDARD FOR AERONAUTICAL DESIGN (S/S BY MIL-STD-210)
• ANA-BUL-428 – ENGINE, ROCKET, LIQUID PROPELLANT, DESIGN AND INSTALLATION CRITERIA FOR
• ANA-BUL-427 – AGE CONTROLS FOR SYNTHETIC RUBBER PARTS (S/S BY ANA BULLETIN 438)
• ANA-BUL-425 – MS FITTING, CLASSIFICATION OF DEFECTS OF (S/S BY MIL-STD-1655)
• ANA-BUL-424 – DESIGNATION, RADIO AND RADAR EQUIPMENT INTERCONNECTING CABLE (USE MIL-W-5088)
• ANA-BUL-423 – ENGINE, AIRCRAFT, VENDOR SUBSTANTIATION TEST FOR (S/S BY MIL-STD-1529)
• ANA-BUL-422 – PROCEDURES FOR STANDARDIZED PROCUREMENT AND UTILIZATION OF AERONAUTICAL ENGINE CONTAINERS (SEE MIL-STD 648, 1367 AND MIL-P-9024)
• ANA-BUL-421 – ATMOSPHERIC PROPERTIES – EXTREME COLD AND HOT, STANDARD FOR AERONAUTICAL DESIGN (S/S BY MIL-STD-210)
• ANA-BUL-419 – O RING TYPE PACKINGS, GASKETS, AND SEALS, IDENTIFICATION OF
• ANA-BUL-418 – DIFFERENTIAL PRESSURES (NO S/S DOCUMENT)
• ANA-BUL-410 – AGE CONTROLS FOR AERONAUTICAL FUEL SYSTEM SYNTHETIC RUBBER MATERIALS (S/S BY ANA BULLETIN 438)
• ANA-BUL-406 – MOCK-UP, ENGINE, CONSTRUCTION & INSPECTION OF (S/S BY MIL-STD-1592)
• ANA-BUL-403 – AN AND MS UTILITY PARTS STANDARDS FOR ENGINES AND PROPELLERS, EXPLANATORY INFORMATION ON (NO S/S DOCUMENT)
• MIL-BUL-400 – Airborne Electronic and Associated Equipment, Applicable Documents (No S/S Documents)
• ANA-BUL-400 – AIRBORNE ELECTRONIC AND ASSOCIATED EQUIPMENT, APPLICABLE DOCUMENTS (NO S/S DOCUMENT)
• ANA-BUL-395 – ENGINE, AIRCRAFT RECIPROCATING, DESIGNATION OF (REPLACED BY MIL-STD-1557)
• ANA-BUL-391 – CHANGES, ENGINEERING, TO AIRCRAFT ENGINES, PROPELLERS AND EQUIPMENT IN PRODUCTION AND SERVICE (S/S BY ANA 445)
• ANA-BUL-390 – CHANGE, ENGINEERING, TO AIRCRAFT (S/S BY ANA 445)
• ANA-BUL-389 – LIST OF STANDARDIZED AND APPROVED AIRCRAFT ORDNANCE AND CHEMICAL AND ARMAMENT ITEMS
• ANA-BUL-388 – INVERTERS, ROTARY (SEE MIL-I-7032 OR QPL-7032)
• ANA-BUL-386 – Recommended Guide for Location and Actuation of Pilot’s Control (S/S by MIL-STD-203)
• ANA-BUL-360 – HOSE END FITTINGS AND HOSE ASSEMBLIES
• ANA-BUL-352 – ENGINES, ROCKET, LIQUID PROPELLANT, DESIGNATION OF (USE MIL-STD-815)USAF(
• MIL-BUL-343 – Documents Applicable to Aircraft Engines and Propellers, Use of (No S/S Document)
• ANA-BUL-337 – DRAWING STATUS NOTES ON AIR FORCE-NAVY AERONAUTICAL STANDARD DRAWINGS (USE MIL-STD-32
• ANA-BUL-325 – NUT, SELF-LOCKING, 550 DEG. F (USE MIL-N-25027)
• ANA-BUL-306 – ENGINES, AIRCRAFT TURBINE AND JET, DESIGNATION OF (NO S/S DOCUMENT)
• ANA-BUL-302 – PRESERVATION AND PACKAGING CARD LIST FOR AERONAUTICAL SPARES, FORM AND INSTRUCTION FOR (S/S BY MIL-STD-834)
• ANA-BUL-295 – CODING, NYLON PARACHUTE CLOTH MANUFACTURERS COLOR
• ANA-BUL-275 – GUIDE FOR THE USE OF LUBRICANTS, COMPOUNDS, AND FLUIDS IN AIRCRAFT
• ANA-BUL-268 – FITTING ASSEMBLY, LOW PRESSURE, DETACHABLE, HOSE STANDARDS 1/AN6270 AN7733
• ANA-BUL-261 – ABBREVIATIONS AND CONTRACTIONS FOR USE ON AIRBORNE EQUIPMENT, APPROVED LIST OF (USE MIL-STD-783)
• ANA-BUL-249 – STRAINERS, FUEL SYSTEM (SPECIFICATION AN-S-40)
• ANA-BUL-245 – CERTIFIED X-RAY LABORATORIES
• ANA-BUL-182 – MATERIAL CHANGES AND SUBSTITUTIONS, AIRCRAFT ENGINE PARTS (PRODUCTION CONTRACTS)
• ANA-BUL-179 – PUMPS, 700 GPH POWER DRIVEN FUEL
• ANA-BUL-178 – PUMPS, 400 GPH POWER DRIVEN FUEL
• ANA-BUL-177 – PUMPS, 200 GPH POWER DRIVEN FUEL
• ANA-BUL-168 – BOLTS, AN AERONAUTICAL STANDARD DRAWINGS REINSTATED BY THIS REVISION( )SPECIFICATION NB-3(
• ANA-BUL-166 – Colors; List of Standard Aircraft Glossy (S/S by FED-STD-595)
• ANA-BUL-164 – LUBRICANTS, HYDRAULIC FLUIDS AND CORROSION INHIBITORS FOR AIRCRAFT, QUALIFYING PROCEDURE FOR (S/S BY – PROVISIONS GOVERNING QUALIFICATION – QUALIFIED PRODUCTS LISTS)
• ANA-BUL-159 – NUT, SELF-LOCKING, 250 DEG. F (USE MIL-N-25027)
• ANA-BUL-157 – Colors, List of Standard Aircraft Camouflage (Use FED-STD-595)
• ANA-BUL-152 – NUMBERS, SERIAL, AIRCRAFT ENGINE, INSTRUCTIONS FOR ASSIGNMENT (S/S BY MIL-STD-1559)
• MIL-BUL-147 – Specifications and Standards of Non-Government Organizations Released for Flight Vehicle Design and Construction (No S/S Document)
• ANA-BUL-143 – Specifications and Standards Use of (S/S by MIL-STD-143)
• ANA-BUL-125 – PROCEDURE FOR OBTAINING QUALIFICATION TEST APPROVAL OF PROTECTIVE COATING MATERIALS FOR AIRCRAFT
• ANA-BUL-112 – ACCEPTANCE STANDARDS FOR SELF SEALING FUEL & OIL CELLS (S/S BY MIL-STD-801)
• ANA-BUL-107 – INSPECTION STANDARDS FOR STAND & DISSECTION TESTED SELF SEALING FUEL & OIL CELLS (S/S BY MIL-STD-801)
• MIL-BUL-100 – List of Specification and Standard Approved by the Naval Sea Systems Command (OS) (No S/S Document)
• MIL-HDBK-1812 – Type Designation,  Assignment and Method for Obtaining (Future Acquisitions may refer to MIL-STD-1812)
• MIL-HDBK-1785 – System Security Engineering Program Management Requirements
• MIL-HDBK-1763 – Aircraft/Stores Compatibility: Systems Engineering Data Requirements and Test Procedures
• MIL-HDBK-1280 – Keyboard Arrangements
• MIL-HDBK-881 – Work Breakdown Structures for Defense Materiel Items (S/S by MIL-STD-881)
• DOD-HDBK-791 – Maintainability Design Techniques Metric
• MIL-HDBK-766 – Design to Cost (No S/S Document)
• MIL-HDBK-727 – Design Guidance for Producibility
• MIL-HDBK-694 – Aluminum and Aluminum Alloys (No S/S Document)
• MIL-HDBK-505 – Definitions of Item Levels, Item Exchangeability, Models, and Related Terms
• DOD-HDBK-345 – MIL-STD-1567, Work Measurement Verification and Compliance Plan (No S/S Document)
• MIL-HDBK-336/3 – Survivability, Aircraft, Nonnuclear, Engine-Volume 3 (See Notice 2 for Replacement Information)
• MIL-HDBK-336/2 – Survivability, Aircraft, Nonnuclear, Airframe-Volume 2 (See Notice 2 for Replacement Information)
• MIL-HDBK-336/1 – Survivability, Aircraft, Nonnuclear, General Criteria-Volume 1 (See Notice 2 for Replacement Information)
• MIL-HDBK-319 – Guide for Preparation and Processing on Air Force Electronic Equipment Type Designation Requests (MIL-STD-196) (See Notice 1 for Replacement Information
• MIL-HDBK-318 – Cargo Aircraft Compartment Dimensional Data (No S/S Document)
• MIL-HDBK-300 – Support Equipment Data Sources
• MIL-HDBK-276/2 – Life Cycle Cost Model for Defense Materiel Systems Operating Instructions (No S/S Document)
• MIL-HDBK-276/1 – Life Cycle Cost Model for Defense Materiel Systems Data Collection Workbook (No S/S Document)
• MIL-HDBK-275 – Guide for Selection of Lubricants, Fluids, and Compounds for Use in Flight Vehicles and Components
• MIL-HDBK-266 – Application of Reliability – Centered Maintenance to Naval Aircraft, Weapon Systems and Support Equipment (S/S by MIL-STD-2173)
• MIL-HDBK-259 – Life Cycle Cost in Navy Acquisitions
• MIL-HDBK-248 – Acquisition Streamlining (No S/S Document)
• MIL-HDBK-245 – Preparation of Statement of Work (SOW)
• MIL-HDBK-221 – Fire Protection Design Handbook for U.S. Navy Aircraft Powered by Turbine Engines
• MIL-HDBK-216 – RF Transmission Lines and Fittings (Including Change Notice 1 Thru Change Notice 10) (No S/S Document)
• MIL-HDBK-206 – Gear Tooth, Load Ratings (Except Aeronautical Applications) (No S/S Document)
• DOD-HDBK-178 – Quantitative Description of Obscuration Factors for Electro-Optical and Millimeter Wave Systems (Metric)
• MIL-HDBK-153 – Office Copying Processes and Equipment (No S/S Document)
• MIL-HDBK-152 – Office Duplicating Processes (No S/S Document)
• MIL-HDBK-140 – Security Classification and Cognizant Activity of Electronic Equipment (No S/S Document)
• MIL-HDBK-115 – US Army Reverse Engineering Handbook (Guidelines and Procedures)

前へ234次へ