8040 - Adhesives規格の一覧

• SAE-ARP1575 – Aluminum Alloy Parts for High Durability Structural Adhesive Bonding Hand Applied Phosphoric Acid Anodizing, Surface Preparation and Priming of
• SAE-ARP1524 – Aluminum Alloy Parts for High Durability Structural Adhesive Bonding, Surface Preparation and Priming of
• SAE-AMS-A-25463 – Adhesive, Film Form, Metallic Structural Sandwich Construction
• SAE-AMS-A-8576 – Adhesive, Acrylic Base, for Acrylic Plastic
• SAE-AMS3689 – Adhesive, Foaming, Honeycomb, Core Splice, Structural -54 Deg. To +177 Deg. C (-65 Deg. To +350 Deg. F)
• SAE-AMS3688 – Adhesive, Foaming, Honeycomb Core Splice, Structural -55 DEG. C to +82 DEG. C (-65 DEG. F to +180 DEG. F)
• SAE-AMS3686 – ADHESIVE, POLYMIDE RESIN, FILM AND PASTE HIGH TEMPERATURE RESISTANT, 315 DEG. C (599 DEG. F)
• SAE-AMS3375 – Adhesive/Sealant, Fluorosilicone, Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing
• SAE-AMS3107/4 – Primer, Adhesive, Corrosion-Inhibiting High Durability Epoxy, -55 Deg, to Plus 215 Deg. C (-67 Deg. to Plus 419 Deg. F)
• SAE-AMS3107/3 – Primer, Adhesive, Corrosion Inhibiting High Durability Epoxy, -55 Deg. to Plus 175 Deg C (-67 Deg. to Plus 347 Deg. F)
• SAE-AMS3107/2 – Primer, Adhesive, Corrosion Inhibiting High Durability Epoxy, -55 Deg. To Plus 120 Deg C (-65 Deg To Plus 250 Deg. F)
• SAE-AMS3107/1 – Primer, Adhesive, Corrosion-inhibiting High Durability Epoxy, -55 Deg. To Plus 95 Deg. C (-65 Deg To Plus 200 Deg. F)
• SAE-AMS3107 – Primer, Adhesive, Corrosion-inhibiting For High Durability Structural Adhesive Bonding
• SAE-AMS3106 – PRIMER, ADHESIVE, CORROSION INHIBITING, MINUS 55 DEG. TO PLUS 950C (MINUS 67 DEG. TO 20 DEG. F) 1 MAR 74 (S/S BY AMS 3107-83 & AMS 3107/1-83)
• ASTM-F765 – Chain, Anchor Ship, Wildcats
• ASTM-F493 – Pipe and Fittings, Plastic, Solvent Cements for Chlorinated Poly (Vinyl Chloride)(CPVC)
• ASTM-E990 – Panels, Honeycomb Sandwich Shelter Core-splice Adhesive for
• ASTM-E874 – Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels, Adhesive Bonding of
• ASTM-E866 – Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
• ASTM-E865 – FILM ADHESIVES, STRUCTURAL, FOR HONEYCOMB SANDWICH PANELS
• ASTM-D5040 – Ash Content of Adhesives
• ASTM-D4783 – Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi, Resistance of
• ASTM-D4690 – Adhesive, Uvea-Formaldehyde Resin
• ASTM-D4689 – Adhesive, Casein-Type
• ASTM-D4500 – Adhesives, Water-Borne, Determining Grit, Lumps, or Undissolved Matter in (No S/S Document)
• ASTM-D4339 – ADHESIVES, DETERMINATION OF THE ODOR OF
• ASTM-D4338 – Flexibility Determination of Supported Adhesive Films by Mandrel Bend
• ASTM-D4317 – Adhesives, Emulsion, Polyvinyl Acetate-Based
• ASTM-D4300 – Films, Adhesive, Ability of, to Support or Resist the Growth of Fungi
• ASTM-D4214 – PAINT, EXTERIOR, FILMS, EVALUATING THE DEGREE OF CHALKING OF
• ASTM-D3833 – Water Vapor Transmission of Pressure-Sensitive Tapes, Standard Test Method for (S/S by ASTM-D3833/D3833M)
• ASTM-D3833/D3833M – Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
• ASTM-D3482 – ADHESIVES, DETERMINING ELECTROLYTIC CORROSION OF COPPER BY
• ASTM-D3166 – Adhesives in Shear by Tension Loading (Metal/Metal), Fatigue Properties of
• ASTM-D2919 – JOINTS, ADHESIVE, STRESSED IN SHEAR BY TENSION LOADING, DETERMINING DURABILITY OF
• ASTM-D2651 – Metal Surfaces for Adhesive Bonding, Preparation of
• ASTM-D2564 – Cements, Solvent, for Poly (Vinyl Chloride) (PVC) Plastic Piping Systems
• ASTM-D2559 – Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
• ASTM-D2556 – Properties, Adhesives Having Shear-Rate-Dependent Flow, Apparent Viscosity of
• ASTM-D1875 – ADHESIVES, IN FLUID FORM, DENSITY OF
• ASTM-D1781 – Adhesives, Climbing Drum Peel for
• ASTM-D1780 – Adhesives, Metal to Metal, Conducting Creep Tests of
• ASTM-D1779 – Adhesive for Acoustical Materials
• ASTM-D1583 – Films, Dry Adhesive, Hydrogen Ion Concentration of
• ASTM-D1579 – Filler Content of Phenol, Resorcinol, and Melamine Adhesives
• ASTM-D1489 – Adhesives, Aqueous, Nonvolatile Content of
• ASTM-D1488 – ADHESIVES, AMYLACEOUS MATTER IN
• ASTM-D1338 – Adhesives, Liquid or Paste by Consistency and Bond Strength, Woring Life of
• ASTM-D1205 – TESTING ADHESIVE FOR BRAKE LINING AND OTHER FRICTION MATERIALS
• ASTM-D1184 – Adhesive Bonded, Flexural Strength of Laminated Assemblies
• ASTM-D1183 – Resistance of Adhesives to Cyclic Laboratory Aging Conditions
• ASTM-D1151 – ADHESIVE BONDS, EFFECT OF MOISTURE AND TEMPERATURE ON
• ASTM-D1146 – LAYERS, POTENTIALLY ADHESIVE, BLOCKING POINT OF
• ASTM-D1084 – ADHESIVES, VISCOSITY OF
• ASTM-D1062 – Bonds, Adhesive, Cleavage Strength of Metal-to-Metal
• ASTM-D1002 – Metal Specimens, Single-Lap-Joint Adhesively Bonded, by Tension Loading (Metal-to-Metal), Apparent Shear Strength
• ASTM-D950 – Bonds, Adhesive, Impact Strength of
• ASTM-D906 – Adhesives, in Plywood Type Construction in Shear by Tension Loading, Strength Properties of
• ASTM-D905 – Adhesive Bonds in Shear by Compression Loading, Strength Properties of
• ASTM-D903 – Adhesive Bonds, Peel or Stripping Strength of
• ASTM-D899 – ADHESIVE, LIQUID, APPLIED WEIGHT PER UNIT, AREA OF
• ASTM-D898 – Adhesive Solids, Dried, Applied Weight Per Unit, Area of (No S/S Document)
• ASTM-D897 – Adhesive Bonds, Tensile Properties of
• ASTM-D896 – Adhesive Bonds to Chemical Reagents, Resistance of
• ASTM-D816 – Rubber Cements
• ASTM-D553 – RUBBER CEMENTS, VISCOSITY & TOTAL SOLIDS CONTENT OF, TEST FOR (REPLACED BY ASTM D1084)
• ASTM-C633 – ADHESION OR COHESIVE STRENGTH OF THERMAL SPRAY COATINGS
• ASTM-C557 – Adhesives for Fastening Gypsum Wallboard to Wood Framing
• MIL-HDBK-83377 – Adhesive Bonding (Structural) for Aerospace and Other Systems, Requirements for
• MIL-HDBK-725 – ADHESIVES: A GUIDE TO THEIR PROPERTIES AND USES AS DESCRIBED BY FEDERAL AND MILITARY SPECIFICATIONS
• MIL-HDBK-691 – Adhesive Bonding
• MIL-HDBK-337 – Adhesive Bonded Aerospace Structure Repair
• QPL-AMS-A-25463 – Adhesive, Film Form, Metallic Structural, Sandwich Construction (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-MMM-A-1617 – Adhesive, Rubber Base, General Purpose (Replaced by the Qualified Products Database (QPD) see Notice 2 for Additional Information)
• QPL-MMM-A-139 – ADHESIVE, NATURAL OR SYNTHETIC-NATURAL RUBBER (NO S/S DOCUMENT)
• QPL-MMM-A-138 – ADHESIVE, METAL TO WOOD, STRUCTURAL
• QPL-MMM-A-134 – Adhesives, Epoxy Resin, Metal Structural Bonding (Replaced by the Qualified Products Database (QPD) see Notice 3 for Additional Information)
• QPL-MMM-A-132 – Adhesives, Heat Resistant, Airframe Structural; Metal to Metal
• QPL-MMM-A-131 – ADHESIVE, GLASS-TO-METAL (FOR BONDING OF OPTICAL ELEMENTS) (SEE MIL-A-48611)
• QPL-MMM-A-121 – Adhesive, Bonding Vulcanized Synthetic Rubber to Steel (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-MMM-A-101 – Adhesive, HAPs-Free, Bonding Vulcanized Synthetics Rubber to Steel
• QPL-85705 – ADHESIVE, AIRCRAFT, FOR STRUCTURAL REPAIR (NO S/S DOCUMENT)
• QPL-48611 – Adhesive System Epoxy – Elastomeric, for Glass to Metal
• QPL-25463 – ADHESIVE, FILM FORM, METALLIC STRUCTURAL, SANDWICH CONSTRUCTION (NO S/S DOCUMENT)
• QPL-25457 – ADHESIVE, AIR-DRYING, SILICONE RUBBER
• QPL-24456 – Adhesive for Plastic Vibration-Damping Tiles (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-24179 – Adhesive, Flexible Unicellular-Plastic Thermal Insulation (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-24084 – ADHESIVE, PLASTIC SHEET VIBRATION DAMPING
• QPL-23092 – CEMENT, NATURAL RUBBER
• QPL-22397 – Adhesive, Phenol and Resorcinol Resin Base (for Marine Service Use) (No S/S Document)
• QPL-21016 – ADHESIVE, RESILIENT DECK COVERING
• QPL-18065 – ADHESIVE, HIGH INITIAL BOND
• QPL-14443 – ADHESIVE, GLASS-TO-METAL (FOR BONDING OF LENSES) USE QPL MMM-A-00131(
• QPL-9117 – ADHESIVE, AROMATIC FUEL CELLS AND GENERL REPAIR
• QPL-8623 – ADHESIVE, EPOXY RESIN, METAL TO METAL STRUCTURAL BONDING
• QPL-5540 – Adhesive, Polychloroprene (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-5539 – ADHESIVE, NATURAL OR SYNTHETIC NATURAL RUBBER
• QPL-5092 – ADHESIVE, RUBBER BASE, GENERAL PURPOSE
• QPL-5090 – ADHESIVE, HEAT RESISTANT, AIRFRAME STRUCTURAL, METAL TO METAL (USE QPL-MMM-A-132)
• QPL-4003 – CEMENT, GENERAL PURPOSE SYNTHETIC BASE

12次へ