5315 - Nails, Machine Keys, and Pins規格の一覧

• AN150201THRUAN150300 – PIN-LOCK, STEEL (S/S BY SAE-AS150201THRUAS150300)
• AN416 – PIN, RETAINING, SAFETY (S/S BY A-A-55488)
• AN121601THRUAN121650 – PIN, STRAIGHT, HEADED – .125 NOM. (S/S BY SAE-AS121601THRUAS121650)
• AN121651THRUAN121700 – PIN, STRAIGHT, HEADED – .187 NOM. (S/S BY SAE-AS121651THRUAS121700)
• AN121701THRUAN121750 – PIN, STRAIGHT, HEADED – .250 NOM. (S/S BY SAE-AS121701THRUAS121750)
• AN121751THRUAN121800 – PIN, STRAIGHT, HEADED – .312 NOM. (S/S BY SAE-AS121751THRUAS121800)
• AN409 – PIN & 100 DEG. COUNTERSUNK HEAD, HIGH SHEAR, OVERSIZE (SEE MS21001)
• AN411 – PIN & FLAT HEAD, HIGH SHEAR, OVERSIZE, (SEE MS21000)
• AN415 – PIN, LOCK (HITCH PIN) (S/S BY A-A-55487)
• AN404 – PIN & FLAT HEAD (7&8) (S/S BY MS&20392)
• AN406 – PIN – FLAT HEAD (1) (S/S BY MS20392)
• AN397 – PIN & FLAT HEAD (7&16) (S/S BY MS&20392)
• AN398 – PIN & FLAT HEAD (1&2) (S/S BY MS&20392)
• AN399 – PIN & FLAT HEAD (9&16) (S/S BY MS&20392)
• AN400 – PIN – FLAT HEAD (5-8) (S/S BY MS20392)
• AN402 – PIN & FLAT HEAD (3&4) (S/S BY MS&20392)
• AN392 – PIN & FLAT HEAD (1&8) (S/S BY MS&20392)
• AN393 – PIN – FLAT HEAD (3-16) (S/S BY MS20392)
• AN394 – PIN & FLAT HEAD (1&4) (S/S BY MS&20392)
• AN395 – PIN & FLAT HEAD (5&16) (S/S BY MS&20392)
• AN396 – PIN & FLAT HEAD (3&8) (S/S BY MS&20392)
• AN380 – PIN, COTTER (NO S/S DOCUMENT)
• AN381 – PIN, COTTER (CORROSION-RESISTANT STEEL) (NO S/S DOCUMENT)
• AN385 – PIN TAPERED PLAIN (S/S BY MS-24692)
• AN386 – PIN – THREADED TAPER (S/S BY NASM386)
• AN303 – NAIL – UPHOLSTER S – OVAL
• FF-T-1813 – TACK (NO S/S DOCUMENT)
• OO-K-220 – Key, Machine
• AN280 – KEY-WOODRUFF (S/S BY MS35756)
• AN301 – NAIL – FLAT HEAD (NO SUPERSEDING DOCUMENT) (USE FED SPEC FF-N-103 OR FF-N-105)
• AN302 – PIN ESCRUTCHEON (S/S BY NASM302)
• FF-P-395/6 – PIN, DRIVE, POWER ACTUATED, TYPE II – FOR USE WITH INDIRECT-ACTING (PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 4 – FASTENER GUIDE BORE DIAMETER 0.376 – 0.390 INCH (NO S/S DOCUMENT)
• FF-P-395/7 – PIN, DRIVE, POWER ACTUATED, TYPE II – FOR USE WITH INDIRECT-ACTING (PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 5 – FASTENER GUIDE BORE DIAMETER 0.392 – 0.400 INCH (NO S/S DOCUMENT)
• FF-P-395/8 – PIN, DRIVE, HAND ACTUATED, TYPE III-FOR USE WITH HAND DRIVEN TOOLS CLASS 1-FASTENER GUIDE BORE DIAMETER 0.251-0.261 INCH (NO S/S DOCUMENT)
• FF-P-395/9 – PIN, DRIVE, HAND ACTUATED, TYPE III – FOR USE WITH HAND DRIVEN TOOLS CLASS 1 – FASTENER GUIDE BORE DIAMETER 0.251 – 0.261 INCH (NO S/S DOCUMENT)
• FF-S-606 – Spikes and Nails, Common, Cut, Spike, Gutter and Round, Wire, and Spike, Barge and Boat, Wrought (S/S by FF-N-105)
• FF-P-395/1 – PIN, DRIVE, POWER ACTUATED, TYPE I – FOR USE WITH DIRECT-ACTING (GAS DRIVEN, NO PISTON) HIGH VELOCITY TOOLS CLASS 1 – FASTENER GUIDE BORE DIAMETER 0.251 -0.261 INCH (NO S/S DOCUMENT)
• FF-P-395/2 – PIN, DRIVE, POWER ACTUATED, TYPE I – FOR USE WITH DIRECT-ACTING (GAS DRIVEN, NO PISTON) HIGH VELOCITY TOOLS CLASS 4 – FASTENER GUIDE BORE DIAMETER 0.376 – 0.390 INCH (NO S/S DOCUMENT)
• FF-P-395/3 – PIN, DRIVE, POWER ACTUATED, TYPE II – FOR USE WITH INDIRECT-ACTING (PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 1 – FASTENER GUIDE BORE DIAMETER 0.251 – 0.261 INCH (NO S/S DOCUMENT)
• FF-P-395/4 – PIN, DRIVE, POWER ACTUATED, TYPE II – FOR USE WITH INDIRECT-ACTING (PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 2 – FASTENER GUIDE BORE DIAMETER 0.313 – 0.330 INCH (NO S/S DOCUMENT)
• FF-P-395/5 – PIN, DRIVE, POWER ACTUATED, TYPE II – FOR USE WITH INDIRECT-ACTING (PISTON DRIVEN) LOW AND MEDIUM VELOCITY TOOLS CLASS 3 – FASTENER GUIDE BORE DIAMETER 0.340 – 0.345 INCH (NO S/S DOCUMENT)
• FF-N-103 – Nail (Small) and Tacks; Cut (S/S by FF-N-105 and FF-T-1813)
• FF-N-105 – Nails, Brads, Staples and Spikes: Wire, Cut and Wrought (No S/S Document)
• FF-F-133 – FASTENERS, WOOD JOINT, CORRUGATED (SAW EDGE) (NO S/S DOCUMENT)
• FF-P-386 – Pin, Cotter (Split)(S/S by ASME-B18.8.1)
• FF-P-395 – PIN, DRIVE GUIDED AND PIN DRIVE, POWER ACTUATED (FASTENERS FOR POWER ACTUATED AND HAND ACTUATED FASTENING TOOLS) (NO S/S DOCUMENT)
• A-A-55487 – Pin, Lock (Hitch Pin)
• A-A-55488 – Pin, Retaining, Safety
• A-A-60039 – Pins, Cadmium and Hexavalent-Chromium Free
• A-A-60044 – Keys, Cadmium and Hexavalent-Chromium Free
• FF-N-101 – NAILS, SPIKES, STAPLES, AND TACKS (S/S BY FF-N-103, FF-N-105, FF-S-611 AND FF-S-606)
• A-A-1961 – NAIL (ROOFING COMPOSITION) (S/S BY FF-N-105)
• A-A-1962 – Nail (Box, Bright) (S/S by FF-N-105)
• A-A-1963 – NAIL (BOX, CEMENT COATED) (S/S BY FF-N-105)
• A-A-2670 – STAPLE, TACKER (NO S/S DOCUMENT)
• A-A-55486 – Pin, Hinge (S/S by MS20253)
• A-A-1960 – NAIL (BRAD, FINE) (S/S BY FF-N-105)
• MIL-STD-1755 – KEYS AND PINS PREFERRED FOR DESIGN, LISTING OF (NO S/S DOCUMENT)
• A-A-1957 – Fastener, Corrugated, Wood Joint
• A-A-1958 – NAIL (COMMON) (S/S BY FF-N-105)
• A-A-1959 – Nail (Casing)
• MS90719 – Staple, Cable, Electrician’s
• MS90720 – STAPLE, FENCE (S/S BY ASTM-F1667)
• MS90721 – STAPLE, WIRING, ELECTRICAN’ S (S/S BY ASTM-F1667)
• MS90722 – Tack, Cut
• MS171401THRUMS171900 – PIN – SPRING, CORROSION RESISTANT STEEL (S/S BY NASM171401THRU171900)
• MS90714 – Nail, Composition Roofing (S/S By ASTM-F1667)
• MS90715 – Nail, Double-Headed (S/S by ASTM-F1667)
• MS90716 – NAIL, FOUNDRY (NO S/S DOCUMENT)
• MS90717 – SPIKES; BARGE AND BOAT (S/S BY ASTM-F1667)
• MS90718 – Spike, Common, Wire (S/S By ASTM-F1667)
• MS90712 – NAIL, COMMON, CUT (S/S BY ASTM-F1667)
• MS90713 – Nail, Common, Wire  (S/S by ASTM-F1667)
• MS90709 – NAIL, BOAT (S/S BY ASTM-F1667)
• MS90710 – NAIL, BRAD TYPE (BRADS, NAILS, CASING, NAILS, FINISHING) (S/S BY ASTM-F1667)
• MS90711 – Nail, Clout, Cut (S/S By ASTM-F1667)
• MS51838 – PIN, STRAIGHT, STEEL-DRILL ROD (S/S BY NASM51838)
• MS51923 – PIN, SPRING-TABULAR, COILED, MEDIUM DUTY (S/S BY NASM51923)
• MS51932 – PIN, STRAIGHT-HEADLESS, DRILLED FOR COTTER PINS (S/S BY NASM51932)
• MS51935 – Key Machine – G.B. Head
• MS51987 – Pin, Spring, Tubular, Coiled, Light Duty (S/S by NASM51987)
• MS51547 – NAIL, CONCRETE (S/S BY ASTM-F1667)
• MS51548 – NAIL, COOLER (S/S BY ASTM-F1667)
• MS51549 – NAIL, BOX (S/S BY ASTM-F1667)
• MS51605 – PIN, GROOVED, HEADLESS (HALF LENGTH TAPER GROOVE) CORROSION-RESISTING STEEL (S/S BY NASM51605)
• MS51606 – Pin, Grooved, Headless (Half Length Reverse Taper Groove) Corrosion-Resistant Steel
• MS51544 – NAIL, FLOORING (S/S BY ASTM-F1667)
• MS51545 – NAIL, FINE (S/S BY ASTM-F1667)
• MS51546 – NAIL, CORKER (S/S BY ASTM-F1667)
• MS51542 – NAIL, UNDERLAYMENT (S/S BY ASTM-F1667)
• MS51543 – NAIL, UNDERLAYMENT (S/S BY ASTM-F1667)
• MS51400 – Pin, Straight, Headless
• MS51538 – NAIL, MASONRY (S/S BY ASTM-F1667)
• MS51539 – NAIL, GYPSUM, WALL BOARD (S/S BY ASTM-F1667)
• MS51540 – NAIL, PALLET (S/S BY ASTM-F1667)
• MS51541 – NAIL, SINKER (S/S BY ASTM-F1667)
• MS35678 – PIN, GROOVED, HEADLESS-LONGITUDINAL CENTER GROOVE, CORROSION-RESISTING STEEL (S/S BY NASM35678)
• MS35679 – PIN, GROOVED, HEADLESS, LONGITUDINAL CENTER GROOVE, BRASS (NO S/S DOCUMENT)
• MS35756 – KEY, WOODRUFF, STEEL ALLOY, WITH KEYWAY AND KEY SLOT DIMENSIONS (S/S BY NASM35756)
• MS35810 – Pin, Straight, Headed (Clevis Pin) Steel, Cadmium or Zinc Plated

前へ123次へ