4710 - Pipe, Tube and Rigid Tubing規格の一覧

• SAE-MAM2253 – STEEL TUBING, CARBON AND ALLOY, TOLERANCES, METRIC
• SAE-J525 – Steel Tubing Annealed for Bending and Flaring, Welded and Cold Drawn Low-Carbon
• SAE-J526 – Steel Tubing, Welded Low-Carbon
• SAE-J527 – Brazed Double Wall Low-Carbon Steel Tubing
• SAE-J533 – Flares for Tubing
• SAE-J1677 – Tests and Procedures for SAE Low-Carbon Steel and Copper Nickel Tubing
• SAE-J2045 – Performance Requirements for Fuel System Tubing Assemblies
• SAE-J2254 – Fluid Power Piping Cleaning Process
• SAE-MAM2243 – Steel, Corrosion and Heat Resistant Tubing, Tolerances, Metric (S/S by SAE-AMS2243)
• SAE-AMS-WW-T-700/4 – Tube, Aluminum Alloy, Drawn, Seamless, 5052
• SAE-AMS-WW-T-700/5 – Tube, Aluminum Alloy, Drawn, Seamless, 5086
• SAE-AMS-WW-T-700/6 – Tube, Aluminum Alloy, Drawn, Seamless, 6061
• SAE-AMS-WW-T-700/7 – Tube, Aluminum Alloy, Drawn, Seamless, 7075
• SAE-AS33611 – Tube Bend RadII
• SAE-J356 – Steel Tubing Normalized for Bending, Double Flairing, and Beading, Welded Flash Controlled Low Carbon
• SAE-J476 – PIPE THREADS DRYSEAL – JUN 61 (S/S BY FED STD H28/8)
• SAE-J524 – Steel Tubing, Seamless Low Carbon, Annealed for Bending and Flaring
• SAE-AMS-WW-T-700/2 – Tube, Aluminum Alloy, Drawn, Seamless, 3003 (No S/S Document)
• SAE-AMS-WW-T-700/3 – Tube, Aluminum Alloy, Drawn, Seamless, 2024
• SAE-AMS6530 – STEEL TUBING, SEAMLESS 0.50CR – 0.55NI – 0.20MO (0.28 – 0.33C) (SAE 8630) (NO S/S DOCUMENT)
• SAE-AMS-T-5066 – Tubing, Carbon Steel (1025), (Aircraft Quality)
• SAE-AMS-T-6735 – Tubing, Chrome-Molybdenum, 4135 Steel, Seamless Aircraft Quality (No S/S Document)
• SAE-AMS-T-6736 – Tubing, Chrome-Molybdenum (4130 or 8630) Steel, Seamless and Welded  (No S/S Document)
• SAE-AMS-T-6845 – Tubing, Steel, Corrosion-Resistant (S30400), Aerospace Vehicle Hydraulic System 1/8 Hard Condition
• SAE-AMS-T-7081 – Tube, Aluminum Alloy, Seamless, Round, Drawn, 6061, Aircraft Hydraulic Quality (S/S by SAE-AMS4081 and SAE-AMS4083)
• SAE-AMS-T-8506 – Tubing, Steel, Corrosion-Resistant, (304), Annealed, Seamless and Welded (S/S by SAE-AMS5565)
• SAE-AMS-STD-183 – CONTINUOUS IDENTIFICATION MARKING OF IRON AND STEEL PRODUCTS (S/S BY SAE-AMS2806 AND SAE-AMS2807)
• SAE-AMS-WW-T-700 – Tube, Aluminum And Aluminum Alloy, Drawn, Seamless, General Specification For
• SAE-AMS-WW-T-700/1 – Tube, Aluminum, Drawn, Seamless, 1100 (No S/S Document)
• SAE-AMS6374 – Steel Tubing, Seam-Free, Round 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) 95.0 ksi (655 MPa) Tensile Strength
• SAE-AMS6381 – Steel Tubing, Mechanical 0.95CR – 0.20MO (0.38 – 0.43C) (SAE 4140)
• SAE-AMS6390 – STEEL TUBING, MECHANICAL – 0.95CR – 0.20MO – (0.38 – 0.43C) (SAE 4140) (S/S BY SAE-AMS6381)
• SAE-AMS6441 – STEEL TUBING, MECHANICAL 1.45CR (0.98 – 1.10C) (SAE 52100) FOR BEARING APPLICATIONS (NO S/S DOCUMENT)
• SAE-AMS6361 – Steel Tubing, Seamless 0.95Cr – 0.20Mo (0.28 – 0.33C) (SAE 4130) 125 ksi (862 MPa) Tensile Strength
• SAE-AMS6362 – Steel Tubing, Seamless, 0.95Cr 0.20Mo (0.28-0.33C)(SAE 4130) 150 ksi (1034 MPa) Tensile Strength
• SAE-AMS6365 – Steel Tubing, Seamless 0.95 CR – 0.20MO (0.33 – 0.38C) (SAE 4135) Normalized or Stress Relieved
• SAE-AMS6371 – Steel, Mechanical Tubing 0.95CR – 0.20MO (0.28 – 0.33C) (SAE 4130)
• SAE-AMS6372 – Steel Tubing, Mechanical 0.95CR – 0.20MO (0.33 – 0.38C) (SAE 4135)
• SAE-AMS6373 – Steel, Welded Tubing 0.95CR – 0.20MO (0.28 – 0.33C) (SAE 4130)
• SAE-AMS5587 – Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 47.5Ni – 22Cr-1.5Co – 9.0Mo – 0.60W – 18.5Fe, Solution Heat Treated
• SAE-AMS5588 – Nickel Alloy, Corrosion and Heat Resistant, Welded Tubing 47.5NI – 22CR – 1.5CO – 9.0MO – 0.60W – 18.5FE Solution Heat Treated
• SAE-AMS5589 – Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5NI -19CR – 3.0MO – 5.1CB – 0.90TI – 0.50A1 – 18FE Consumable Electrode or Vacuum Induction Melted 1775 Deg. F (968 Deg. C) Solution Heat Treated
• SAE-AMS5590 – Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 52.5NI – 19CR – 3.0MO – 5.1 CB – 0.90TI – 0.50A1 – 18FE Consumable Electrode or Vacuum Induction Melted 1950 Deg. F (1066 Deg. C) Solution Heat Treated
• SAE-AMS5591 – Steel, Corrosion and Heat Resistant, Tubing, Seamless 12.5CR (SAE 51410) Annealed
• SAE-AMS5896 – Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing 18.5CR – 10.5NI – 0.55TI (SAE 30321) Solution Heat Treated and Cold Drawn, One-Eighth Hard Temper
• SAE-AMS5897 – Steel, Corrosion and Heat Resistant, Seamless or Welded Hydraulic Tubing 18.5CR – 11NI – 0.80CB (SAE 30347) Solution Heat Treated and Cold Drawn, One-Eighth Hard Temper
• SAE-AMS6282 – Steel Tubing, Mechanical – 0.50CR – 0.55NI – 0.25MO (0.33 – 0.38C) (SAE 8735)
• SAE-AMS6323 – Steel Tubing, Mechanical 0.50CR – 0.55NI – 0.25MO (0.38 – 0.43C) (SAE 8740)
• SAE-AMS6360 – STEEL TUBING, SEAMLESS 0.95CR – 0.20MO (0.28 – 0.33C) (SAE 4130) NORMALIZED OR STRESS RELIEVED
• SAE-AMS5575 – Steel, Corrosion and Heat Resistant, Welded Tubing 18CR – 10.5NI – 0.70CB (SAE 30347) Solution Heat Treated
• SAE-AMS5576 – Steel, Corrosion And Heat Resistant, Welded Tubing, 18cr 10.5ni 0.40ti (Sae 30321) Solution Heat Treated
• SAE-AMS5577 – Steel, Corrosion and Heat Resistant, Welded Tubing 25CR – 20NI (SAE 30310) Solution Heat Treated
• SAE-AMS5578 – Steel, Corrosion and Heat Resistant, Welding Tubing 12CR – 8.5NI – 0.30 CB – 1.1TI – 2.0 CU Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable
• SAE-AMS5580 – Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 74NI – 15.5CR – 8.0FE Annealed
• SAE-AMS5581 – Nickel Alloy, Corrosion and Heat Resistant, Seamless or Welded Tubing 62NI – 21.5CR – 9.OMO – 3.7CB Annealed
• SAE-AMS5582 – Nickel Alloy, Corrosion and Heat-Resistant, Seamless Tubing 72Ni – 15.5Cr – 0.95Cb – 0.95Cb – 2.5Ti – 0.7OAl – 7.0Fe Solution Heat Treated, Precipitation Hardenable to 155 ksi(1069 MPa) Tensile Strength
• SAE-AMS5583 – Nickel Alloy, Corrosion and Heat Resistant, Seamless Tubing 72NI – 15.5CR – 0.95 CB – 2.5TI – 0.70AL – 7.0FE Vacuum Melted Solution Heat Treated, Precipitation Hardenable to 170 KSI (1172 MPA) Tensile Strength
• SAE-AMS5585 – Alloy, Corrosion and Heat Resistant, Welded Tubing 32FE – 21CR – 20NI -20CO – 3MO – 2.5W – 1.0CB – 0.15N Solution Heat Treated
• SAE-AMS5586 – Nickel Alloy, Corrosion and Heat Resistant, Welded Tubing 57NI – 19.5CR – 13.5CO – 4.2MO – 2.9TI – 1.4AL – 0.006B 0.08ZR Consumable Electrode or Vacuum Induction Melted, Annealed
• SAE-AMS5566 – Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19CR – 10NI (SAE 30304) High Pressure , Cold Drawn
• SAE-AMS5567 – Steel, Corrosion Resistant, Seamless or Welded Hydraulic Tubing 19CR – 10NI (SAE 30304) Solution Heat Treated
• SAE-AMS5568 – Steel, Corrosion and Heat Resistant, Welded Tubing 17Cr – 7.1Ni – 1.1Al Solution Heat Treated, Precipitation-Hardenable
• SAE-AMS5570 – Steel, Corrosion and Heat Resistant, Seamless Tubing 18CR – 11NI – 0.40TI (SAE 30321) Solution Heat Treated
• SAE-AMS5571 – Steel Corrosion and Heat Resistant, Seamless Tubing 18Cr – 10.5Ni – 0.70Cb (Nb) (SAE 30347) Solution Heat Treated
• SAE-AMS5572 – Steel, Corrosion and Heat Resistant, Seamless Tubing 25CR – 20NI (SAE 30310S) Solution Heat Treated
• SAE-AMS5562 – Steel, Corrosion and Heat Resistant, Seamless Tubing 9.0MN – 20CR – 6.5NI – 0.28N Solution Heat Treated
• SAE-AMS5563 – Steel, Corrosion Resistant, Seamless or Welded Tubing 19Cr-9.5Ni (SAE 30304) Cold Drawn, 1/4 Hard Temper
• SAE-AMS5564 – Steel, Corrosion Resistant, Tubing 19Cr – 10Ni (SAE 30304) High-Pressure Hydraulic, Welded Plus Ultrasonically Tested or Seamless Cold Drawn, One Eight-Hard Temper
• SAE-AMS5565 – Steel, Corrosion Resistant, Welded Tubing 19CR – 9.5NI (SAE 30304) Solution Heat Treated
• SAE-AMS5053 – Steel Tubing, Welded 0.13 Carbon, Maximum Annealed (No S/S Document)
• SAE-AMS5075 – Steel Tubing, Seamless 0.22 – 0.28C (SAE 1025) Cold Drawn and Stress Relieved
• SAE-AMS5077 – Steel Tubing, Welded (0.22 – 0.28C) (SAE 1025) Normalized or Stress Relieved (No S/S Document)
• SAE-AMS5554 – Steel, Corrosion and Heat-Resistant, Seamless Tubing 16.5Cr – 4.5Ni – 2.9Mo – O.10N Annealed
• SAE-AMS5556 – Steel,Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18Cr-11Ni-0.70Cb (SAE 30347) Solution Heat Treated
• SAE-AMS5557 – Steel, Corrosion and Heat-Resistant, Seamless or Welded Hydraulic Tubing 18.5CR – 10.5NI – 0.40TI (SAE 30321) Solution Heat Treated
• SAE-AMS5558 – Steel, Corrosion and Heat Resistant, Welded Tubing 18CR – 10.5NI – 0.70 CB (SAE 30347) Thin Wall Solution Heat Treated
• SAE-AMS5559 – Steel, Corrosion and Heat Resistant, Welded Tubing 18CR – 10.5NI – 0.40TI (SAE 30321) Thin Wall Solution Heat Treated
• SAE-AMS5560 – Steel, Corrosion Resistant, Seamless Tubing 19CR – 10NI (SAE 30304) Solution Heat Treated
• SAE-AMS5561 – Tubing, Steel, Welded and Drawn, Corrosion and Heat Resistant 9.0MN – 20CR -6.5NI – 0.28N High Pressure Hydraulic
• SAE-AMS4944 – Titanium Alloy, Seamless, Hydraulic Tubing 3.0al – 2.5v Cold Worked, Stress Relieved
• SAE-AMS5050 – Steel Tubing, Seamless 0.15 Carbon, Maximum Annealed
• SAE-AMS4081 – Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0MG – 0.60SI – 0.28CU – 0.20CR (6061-T4) Solution Heat Treated and Naturally Aged
• SAE-AMS4082 – ALUMINUM ALLOY, SEAMLESS DRAWN TUBING 1.0MG – 0.60SI – 0.28CU – 0.20CR (6061-T6) SOLUTION AND PRECIPITATION HEAT TREATED
• SAE-AMS4083 – Aluminum Alloy Tubing, Hydraulic, Seamless, Drawn, Round 1.0MG – 0.60SI – 0.28CU – 0.20CR (6061-T6) Solution and Precipitation Heat Treated
• SAE-AMS4625 – Phosphor Bronze Bars, Rods, And Tubing 95cu – 5sn Hard Temper
• SAE-AMS4922 – Tubing, Hydraulic, Titanium Alloy, Seamless, 15V-3.0CR-3.0AL-3.0SN, Cold Worked and Precipitation Heat Treated
• SAE-AMS4941 – Titanium Tubing, Welded Annealed, 40 KSI (276 MPA) Yield Strength
• SAE-AMS4942 – Titanium Tubing, Seamless Annealed, 40.0 ksi (275 MPa) Yield Strength
• SAE-AMS4943 – Titanium Alloy, Seamless Hydraulic Tubing 3.0AL-2.5V Annealed
• SAE-AMS2223 – Tolerances Copper and Copper Alloy Seamless Tubing
• SAE-AMS2243 – Tolerances Corrosion and Heat Resistant Steel Tubing
• SAE-AMS2253 – TOLERANCES CARBON AND ALLOY STEEL TUBING
• SAE-AMS2806 – IDENTIFICATION, BARS, WIRE, MECHANICAL TUBING, AND EXTRUSIONS CARBON AND ALLOY STEELS AND CORROSION AND HEAT RESISTANT STEELS AND ALLOYS
• SAE-AMS2807 – IDENTIFICATION CARBON AND LOW-ALLOY STEELS, CORROSION AND HEAT RESISTANT STEELS AND ALLOYS SHEET, STRIP, PLATE, AND AIRCRAFT TUBING
• SAE-AMS3630 – Plastic Extrusions, Flexible, Polyvinyl Chloride (No S/S Document)
• SAE-AMS4066 – Aluminum Alloy, Drawn, Round Seamless Tubing 6.3CU – 0.30MN – 0.18ZR – 0.10V – 0.06TI – (2219-T8511) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated
• SAE-AMS4071 – Aluminum Alloy Drawn, Round, Seamless Hydraulic Tubing 2.5mg – 0.25cr (5052-0) Annealed
• ISO8535 – Diesel Engines – Steel Tubes for High-Pressure Fuel Injection Pipes – Part 1: Requirements for Seamless Cold-Drawn Single-Wall Tubes
• NSF14 – Piping, Plastics System Components and Related Materials Standard Number 14 for
• AWWA-C111 – Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings

12次へ