List of FACR Standards

• ISA-S51.1 – Process Instrumentation Terminology
• ISA-S18.1 – Annunciator Sequences and Specifications
• ISA-S12.13.01 – Performance Requirements for Combustible Gas Detectors
• ISA-S7.0.01 – Quality Standard for Instrument Air
• ISA-S5.3 – Graphic Symbols for Distributed Control/Shared Display Instrumentation, Logic and Computer Systems
• ISA-S5.2 – Binary Logic Diagrams for Process Operations
• ISA-S5.1 – Instrumentation Symbols and Identification
• ISA-RP60.9 – Piping Guide for Control Centers
• ISA-RP2.1 – Manometer Tables
• ISA-MC96.1 – Temperature Measurement Thermocouples (No S/S Document)
• IESNA-LM44 – Approved Method for Total and Diffuse Reflectometry (No S/S Document)
• IESNA-HB9 – Lighting Handbook (No S/S Document)
• IESNA-RP8 – Roadway Lighting (S/S by IES-RP8)
• IES-RP8 – Roadway Lighting
• IEEE602 – ELECTRIC SYSTEMS IN HEALTH CARE FACILITIES
• IEC61131 – CONTROLLERS, PROGRAMMABLE PART 3: PROGRAMMING LANGUAGES
• IEC61000 – Electromagnetic Compatibility (EMC) Part 4-5: Testing and Measurement Techniques; Surge Immunity Test
• IEC60947 – SWITCHGEAR AND CONTROLGEAR, LOW-VOLTAGE, PART 4-1: CONTACTORS AND MOTOR STARTERS ELECTROMECHANICAL CONTACTORS AND MOTOR STARTERS
• IEC60265 – Switches, High Voltage Part 1: Switches for Rated Voltages Above 1 KV and Less than 52 KV (See Notice of Withdrawal for Replacement Information)
• IEC60034 – Machines, Rotating Electrical, Part 2: Methods for Determining Losses and Efficiency of Rotating Electrical Machinery from Tests (Excluding Machines for Traction Vehicles) (See Notice of Withdrawal for Replacement Information)
• ICEA-S90.661 – CABLE FOR USE IN GENERAL PURPOSE AND LAN COMMUNICATIONS WIRING SYSTEMS, CATEGORY 3, 5, & 5E INDIVIDUALLY UNSHIELDED TWISTED PAIR INDOOR
• ICEA-S87.640 – FIBER OPTIC OUTSIDE PLANT COMMUNICATIONS CABLE
• ICEA-S85.625 – AIRCORE, POLYOLEFIN INSULATED, COPPER CONDUCTOR TELECOMMUNICATIONS CABLE
• ICEA-S84.608 – TELECOMMUNICATIONS CABLE, FILLED POLYOLEFIN INSULATED COPPER CONDUCTOR
• ICEA-S83.596 – FIBER OPTIC PREMISES DISTRIBUTION CABLE
• GA600 – FIRE RESISTANCE DESIGN MANUAL
• GA253 – GYPSUM SHEATHING, APPLICATION OF
• GA224 – PRE-DECORATED GYPSUM BOARD, INSTALLATION OF
• GA216 – GYPSUM BOARD, APPLICATION AND FINISHING OF
• GA214 – GYPSUM BOARD FINISH, RECOMMENDED LEVELS OF
• FM-P9513 – CONTRACTORS, ROOFING, SPECIALIST DATA BOOK SET FOR
• FM-P7825A – FIRE PROTECTION, APPROVAL GUIDE
• FM-P7825B – EQUIPMENT, ELECTRICAL, APPROVAL GUIDE
• FM-P7825C – BUILDING MATERIALS, APPROVAL GUIDE
• FM-AS4991 – FIRESTOP CONTRACTORS, APPROVAL OF
• FM-AS4470 – ROOF COVERS, CLASS I
• FM-DS1217 – WATERTUBE BOILERS
• FM-DS149 – PERIMETER FLASHING
• FM-DS129 – ROOF COMPONENTS, ABOVE-DECK
• FM-DS128 – DESIGN WIND LOADS
• EIA-SEA103 – Speakers for Sound Equipment (No S/S Document)
• EIA758 – Customer-Owned Outside Plant Telecommunications Cabling Standard, Including Addendum 1 (No S/S Document)
• EIA607 – Commercial Building Grounding (Earthing) and Bonding Requirements for Telecommunications
• EIA606 – Telecommunications Infrastructure, Administrative Standard for the (No S/S Document)
• EIA603 – Land Mobile FM or PM Communications Equipment Measurement and Performance Standard (No S/S Document)
• EIA590 – Physical Location and Protection of Below Ground Fiber Optic Cable Plant, Standard for (See Notice of Withdrawal for Replacement Information)
• EIA570 – Residential Telecommunications Cabling Standard, Plus Addendum 2: Control Cabling for Residences (See Notice of Withdrawal for Replacement Information)
• EIA569 – Telecommunications Pathways and Spaces, Commercial Building Standard for (See Notice of Withdrawal for Replacement Information)
• EIA568 – Commercial Building Telecommunication Wiring Standard 3 Parts (See Notice of Withdrawal for Replacement Information)
• EIA526.14 – Optical Power Loss Measurements of Installed Multimode Fiber Cable Plant OFSTP-14A (See Notice of Withdrawal for Replacement Information)
• EIA526.7 – Measurement of Optical Power Loss of Installed Single-Mode Fiber Cable Plant (ANSI/TIA/EAI-526-7) (See Notice of Withdrawal for Replacement Information)
• EIA492AAAB – Fibers, 50-UM Core Diameter/125-UM Cladding Diameter Class IA Graded-Index Multimode Optical (See Notice of Withdrawal for Replacement Information)
• EIA492CAAA – Class IVA Dispersion-Unshifted Single-Mode Optical Fibers (See Notice of Withdrawal for Replacement Information)
• EIA492AAAA – Core Diameter/125-UM Cladding Diameter Class IA Graded-Index Multimode Optical Fibers, 62.5-UM (See Notice of Withdrawal for Replacement Information)
• EIA485 – Electrical Characteristics of Generators and Receivers for Use in Balanced Digital Multipoint System (No S/S Document)
• EIA472DAAA – Dielectric Fiber Optic Communications Cable for Outside Plant use Containing Class 1A 62.5 UM Core Diameter/125 UM Cladding Diameter/250 UM Coating Diameter Fiber(s) (No S/S Document)
• EIA472D000 – Fiber Optic Communications Cable for Outside Plant use (See Notice of Withdrawal for Replacement Information)
• EIA455.104 – Fiber Optic Cable Cyclic Flexing Test, FOTP-104 (See Notice of Withdrawal for Replacement Information)
• EIA455.78 – Fibers, Optical, FOTP-78 IEC 60793-1-40, Part 1-40: Measurement Methods and Test Procedure–Attenuation (See Notice of Withdrawal for Replacement Information)
• EIA455.61 – Fiber or Cable Attenuation Using an OTDR, FOTP-61 Measurement of (See Notice of Withdrawal for Replacement Information)
• EIA455.59 – Measurement of Fiber Point Defects Using an OTDR (See Notice of Withdrawal for Replacement Information)
• EIA455.58 – Fibers, Graded-Index Optical, FOPT-58 Core Diamete Measurement of (See Notice of Withdrawal for Replacement Information)
• EIA455.47 – Radiation Pattern Measurement, FOPT-47 Output Far Field (See Notice of Withdrawal for Replacement Information)
• EIA455.46 – Optical Fibers, Long-Length, Graded-Index, FOTP-46 Spectral Attenuation Measurement for (See Notice of Withdrawal for Replacement Information)
• EIA455.30 – Optical Fiber, Multimode, Information Transmission Capacity, FOTP-30 Frequency Domain Measurement of (See Notice of Withdrawal for Replacement Information)
• EIA455.25 – Optical Fiber Cables, FOTP-25 Impact Testing of (See Notice of Withdrawal for Replacement Information)
• EIA455.13 – Fiber Optic Components, Devices, and Assemblies, FOTP-13 Visual and Mechanical Inspection of (See Notice of Withdrawal for Replacement Information)
• EIA412 – Direct View High Resolution Monochrome Closed Circuit Television Monitors (No S/S Document)
• EIA375 – Television Monitors 525/60 Interlaced 2:1, Direct View Monochrome Closed Circuit (No S/S Document)
• EIA374 – Land Mobile Selective Signaling Standard (No S/S Document)
• EIA330 – Closed Circuit Television Camera 525/60, Electrical Performance Standard for (No S/S Document)
• EIA329 – Antennas, Communication, Part I Base Station Antennas, Minimum Standards for (No S/S Document)
• EIA232 – Interface Between Data Terminal Equipment and Date Circuit-Termination Equipment Employing Serial Binary Data Interchange (No S/S Document)
• EIA222 – Steel Antenna Towers and Antenna Supporting Structures (No S/S Document)
• EIA160 – Sound Systems (No S/S Document)
• DFI792 – Foundation, Pile, Inspectors Manual for (No S/S Document)
• DFI791 – Hammer, A Pile Inspectors Guide to Hammers (No S/S Document)
• CTI-STD137 – FIBERGLASS PULTRUDED STRUCTURAL PRODUCTS FOR USE IN COOLING TOWERS
• CTI-STD134 – PLYWOOD FOR USE IN COOLING TOWERS
• CTI-STD114 – DOUGLAS FIR LUMBER SPECIFICATIONS (COAST TYPE)
• CTI-STD112 – LUMBER, PRESSURE PRESERVATIVE TREATMENT OF
• CTI-STD111 – GEAR SPEED REDUCERS
• CTI-STD103 – REDWOOD LUMBER SPECIFICATIONS
• CSI-MP2.4 – Uniformat – A Uniform Classification of Construction Systems and Assemblies (No S/S Document)
• CSI-MP2.3 – Construction Specifications, A Recommended Page Format for (No S/S Document)
• CSI-MP2.2 – Construction Specification Sections, A Recommended Format for (No S/S Document)
• CSI-MP2.1 – Masterformat, Master List of Numbers and Titles for the Construction Industry (No S/S Document)
• BSI4994 – Vessels and Tanks in Reinforced Plastics, Design and Construction of (No S/S Document)
• BHMA-A115.1 – Steel Doors Standard and Steel Frames for Series 1000 Mortise Locks and Latches, Preparation of 1-3/8 and 1-3/4 (No S/S Document)
• BHMA-A115 – Steel Preparation Standards (No S/S Document)
• AWS-D1.2A – Aluminum, Commentary on Structural Welding Code (No S/S Document)
• ASTM-E835/E835M – Clay and Concrete Masonry Units, Modular Coordination of (No S/S Document)
• ASTM-E822 – Covers, Solar Collector, to Hail by Impact with Propelled Ice Balls, Determining Resistance of
• ASTM-E814 – Fire Tests of Penetration Firestop Systems
• ASTM-E713 – Scales for Metric Building Drawings, Selection of (No S/S Document)
• ASTM-E621 – Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E 380) (No S/S Document)
• ASTM-E577 – Building Parts and Systems, Rectilinear, Coordination of (No S/S Document)
• ASTM-E424 – Sheet Materials, Solar Energy Transmittance and Reflectance (Terrestrial) of
• ASTM-E413 – Insulation, Rating Sound, Classification for
• ASTM-E154 – Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

Previous123Next