List of 8030 - Preservative and Sealing Compounds Standards

• TT-F-336 – FILLER, WOOD, PASTE (NO S/S DOCUMENT)
• TT-S-230 – Sealing Compound: Elastomeric Type, Single Component (for Calking, Sealing, and Glazing in Building and Other Structures) (No S/S Document)
• TT-S-00227 – SEALING COMPOUND, ELASTOMERIC TYPE, MULTI-COMPONENT (FOR CALKING, SEALING, AND GLAZING IN BUILDINGS AND OTHER STRUCTURES) (S/S BY A-A-1556)
• TT-S-227 – SEALING COMPOUND, RUBBER BASE, TWO COMPONENT (FOR CAULKING, SEALING, AND GLAZING IN BUILDING CONSTRUCTION (S/S BY A-A-1556)
• TT-S-222 – SEALING COMPOUND: ASBESTOS (NO S/S DOCUMENT)
• TT-W-156 – Water-Repellent Compound, Textile Finish
• SS-S-1996 – SEALER, WATER AND WEATHER RESISTANT, FOR ASPHALT, CONCRETE, AND MASONRY SURFACES (NO S/S DOCUMENT)
• SS-S-1614 – Sealants, Joint, Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Tar Concrete Pavements (No S/S Document)
• SS-S-001416 – SEALING COMPOUND, ASPHALT AND CONCRETE SURFACES
• SS-S-1401 – Sealant, Joint, Non-Jet-Fuel-Resistant, Hot-Applied, for Portland Cement and Asphalt Concrete Pavements (No S/S Documents)
• SS-P-680 – Priming-Material, Fatty Acid Pitch Base, Brushing and Spraying Consistency(for Concrete, Masonry, and Other Mineral Surfaces) (No S/S Document)
• SS-C-608 – COMPOUNDS, JOINTING, SULFUR (FOR BELL-AND-SPIGOT CAST-IRON PIPE)
• SS-C-560 – COATING-MATERIAL, FATTY ACID PITCH BASE, (NONBLEEDING) BRUSHING AND SPRAYING CONSISTENCY (FOR FOUNDATIONS, ROOFS, WALLS, ETC.) (NO S/S DOCUMENT)
• SS-S-210 – Sealing Compound, Preformed Plastic, for Expansion Joints and Pipe Joints (No S/S Document)
• SS-S-200 – Sealants, Joint, Two-Component, Jet-Blast-Resistant, Cold-Applied, for Portland Cement Concrete Pavement (No S/S Document)
• SS-S-195 – SEALING COMPOUND, TWO COMPONENT, ELASTOMERIC, POLMER TYPE, COLD APPLIED, CONCRETE PAVING JOINTS (USE SS-S-200)
• SS-S-171 – Sealer, Mineral-Filled Asphalt, for Joints in Concrete (Use SS-S-1041)
• SS-S-170 – Sealing Compound, Two Components, Jet Fuel Resistant, Cold Applied, Concrete Paving (Use SS-S-200)
• SS-S-169 – SEALER, JOINT, SEWER, MINERAL-FILLED, HOT-POUR (NO S/S DOCUMENT)
• SS-S-168 – Sealing Compound, Sewer, Bituminous Two Component, Mineral Filled, Cold Applied (See SS-S-169)
• SS-S-167 – SEALING COMPOUND, JET-FUEL RESISTANT, HOT APPLIED, CONCRETE PAVING (USE SS-S-1614)
• SS-S-164 – SEALER, HOT POURED TYPE, FOR JOINTS IN CONCRETE (USE S5-S-1401)
• SS-S-159 – SEALING COMPOUND, COLD-APPLICATION MASTIC MULTIPLE COMPONENT TYPE-FOR JOINTS IN CONCRETE
• SS-S-158 – SEALING COMPOUND, COLD-APPLICATION READY-MIXED LIQUEFIER TYPE, FOR JOINTS IN CONCRETE (USE SS-S-156)
• SS-S-156 – SEALER, COLD APPLICATION, EMULSION TYPE, FOR JOINTS IN CONCRETE (USE SS-S-200)
• SS-W-110 – WATER REPELLENT, COLORLESS, SILICONE RESIN BASE (NO S/S DOCUMENT)
• QQ-C-100 – CEMENT, IRON AND STEEL
• HH-C-536 – COMPOUND, PLUMBING-FIXTURE-SETTING (NO S/S DOCUMENT)
• HH-T-30 – TAPE, PIPE COATING, COAL TAR, HOT APPLIED, AND PRIMER
• R-T-111 – Tar, for Joint Filler
• O-L-172 – LEATHER DRESSING, VESICANT GAS RESISTANT (NO S/S DOCUMENT)
• O-L-169 – LEATHER DRESSING, TRANSMISSION-BELT (S/S BY O-B-160)
• O-L-164 – LEATHER DRESSING, MILDEW PREVENTIVE (NO S/S DOCUMENT)
• O-B-160 – BELT DRESSING, LEATHER
• O-G-93 – GALVANIZING REPAIR COMPOUND
• L-T-1512 – Tape, Pressure Sensitive Adhesive, Pipe Wrapping (No S/S Document)
• L-T-80 – Tape, Pressure-Sensitive Adhesive (Aluminum-Backed)
• C-N-200 – NEATS FOOT OIL (S/S BY A-A-2884)
• A-A-59885 – Corrosion Prevention Compound
• A-A-59720 – Sealing and Locking Compounds, Single-Component
• A-A-59719 – 100% Polyurethane Sprayed on Linings (S/S by MIL-PRF-32440)
• A-A-59491 – Sealing Compound, Thread and Gasket, Hydrocarbon Fluid and Water Resistant
• A-A-59464 – Plastic Plastisol (for Coating Metallic Objects)
• A-A-59313 – Thread, Compound; Antiseize, Zinc Dust-Petrolatum
• A-A-59295 – Corrosion Preventive Compounds, Cold Application, for New and Fielded Motor Vehicles and Trailers and Protection of Steel Enclosed Spaces
• A-A-59293 – Sealing Compound, Adhesive: Curing (Polysulfide Base)
• A-A-59276 – Wood Preservatives: Waterborne or Water Reducible
• A-A-59258 – Tape, Aluminum Foil, Heat Reflective, Pressure Sensitive Adhesive
• A-A-58092 – Tape, Antiseize, Polytetrafluorethylene
• A-A-56025 – Paste, Conductive
• A-A-52495 – Sealing Compound, Non-Curing, Polybutene
• A-A-52408 – Preservative Coating, Rubber : for Rubber Surfaces
• A-A-3133 – Filler, Two Component Type (for Dents, Cracks, Small Holes, and Blow Holes) (No S/S Document)
• A-A-3110 – Plumbing Fixture Setting Compound (No S/S Document)
• A-A-2982 – Coating Compound, Butuminous, Fillers, Solvent Type, Aluminum Pigmented (No S/S Document)
• A-A-2884 – Neat’s-Foot Oil (No S/S Document)
• A-A-2817 – Tire Puncture Sealant and Inflator (No S/S Document)
• A-A-2702 – Sealing Compound (Liquid Protectant and “Beautifier”)
• A-A-2542 – SEALER, TERRAZO AND CONCRETE FLOORS, WATERBASED (NO S/S DOCUMENT)
• A-A-2210 – FILLER, WOOD, PASTE (NO S/S DOCUMENT)
• A-A-1556 – SEALING COMPOUND (ELASTOMERIC JOINT SEALANTS) (S/S BY ASTM-C920)
• A-A-1500 – SEALER SURFACE (LATEX BLOCK FILLER) (NO S/S DOCUMENT)
• A-A-378 – PUTTY, LINSEED OIL TYPE, (FOR WOOD SASH GLAZING) (NO S/S DOCUMENT)
• A-A-373 – GLAZING COMPOUND, SASH (METAL) FOR BACK BEDDING AND FACE GLAZING (NOT FOR CHANNEL OR STOP GLAZING) (S/S BY ASTM-C669)
• A-A-272 – Caulking Compounds
• DOD-STD-1371 – INSPECTION PROCEDURE FOR USE OF ANAEROBIC THREAD LOCKING COMPOUNDS WITH STUDS (S/S BY SAE-J2270)
• MIL-STD-341 – COATING, ALUMINUM AND SILICON DIFFUSION, PROCESS FOR (S/S BY MIL-HDBK-341)
• MIL-STD-340 – COATING, PACK CEMENTATION, CHROME ALUMINIDE, PROCESS FOR (S/S BY MIL-HDBK-506)
• MS35742 – COATING COMPOUND, BITUMINOUS SOLVENT, COLORS, CONTAINER SIZES, AND USE CHARACTERISICS THEREOF (USE MIL-P-1227)
• MS35729 – WOOD PRESERVATIVE, PENTACHLOROPHENAL MIXTURE (USE MIL-W-18142)
• MS35710 – CORROSION PREVENTIVE COMPOUND, HOT APPLICATION (USE MIL-C-15167)
• MS35708 – COATING COMPOUND, BITUMINOUS SOLVENT TYPE (USE MIL-C-13950)
• MS35702 – Wood Preservative, Wolman Salt
• MS35701 – WOOD PRESERVATIVE, CHROMATED ZINC CHLORIDE (USE TT-W-551)
• MS35700 – WOOD PRESERVATIVE, AMMONICAL COPPER ARSENITE (USE TT-W-549)
• MS35699 – WOOD PRESERVATIVE, ACID COPPER CHROMATE, COLORS, CONTAINER SIZES, AND USE CHARACTERISTICS THEREOF (USE TT-W-546)
• MS35694 – COATING COMPOUND, METAL PRETREATMENT, RESIN&ACID
• MS35641 – WOOD PRESERVATIVE, PENTACHLOROPHENOL MIXTURE
• MS35640 – WOOD PRESERVATIVE, PENTACHLOROPHENOL MIXTURE
• MS35639 – WOOD PRESERVATIVE, COPPER NAPHTHENATE
• MS35621 – SEALING COMPOUND
• MS35620 – SEALING COMPOUND
• MS35615 – PUTTY
• MS35604 – PRESERVATIVE COATING, CANVAS
• MS35554 – PAINT, ACID, PROOF
• MS35551 – MILDEW RESISTANT COMPOUND, TEXTILE
• MS35538 – GLAZING COMPOUND, SASH
• MS35516 – CORROSION RESISTANT COATING, CHEMICALLY TREATED ALUMINUM.
• MS35510 – COMPOUND, CALKING, PLASTIC
• MS35506 – COATING, EXTERIOR, AIR-DRYING, FOR 1 TON CONTAINERS
• MS35505 – COATING, COMPOUND, BITUMINOUS SOLVENT
• MS35504 – COATING, COMPOUND, BITUMINOUS EMULSION
• MS35498 – CALKING COMPOUND
• MS35496 – ANTISEIZE COMPOUND
• MS18069 – COMPOUNDS, ADHESIVE, AIRCRAFT DESIGN AND USE LIMITATIONS FOR THREADED COMPONENTS RETAINED, SEALED OR LOCKED BY
• MIL-C-87179 – Coating, Protective, Solvent Removable, for Microcircuits (S/S by SAE-AMS2535)
• MIL-S-85420 – Sealing Compounds, Quick Repair, Low Temperature Curing Polysulfide, for Aircraft Structures _x000D_ (No S/S Document)
• MIL-S-85334 – Sealing Compound, Noncuring, Low Consistency, Silicone, Groove Injection, for Integral Fuel Tanks
• MIL-S-85318 – Sealing Compound, Non-Carcinogen Curing Polyurethane (Polyether-Based), Electric Connectors and Electric Systems
• MIL-S-85312 – SEALING COMPOUND, NONCURING, POLYSULFIDE, GROOVE INJECTION, FOR INTEGRAL FUEL TANKS (NO S/S DOCUMENT)

Previous234Next