List of Road and Paving Standards

• ASTM D8237 – Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device
• ASTM D8239 – Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test
• ASTM D8188 – Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)
• ASTM D8189 – Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)
• ASTM D8159 – Standard Test Method for Automated Extraction of Asphalt Binder from Asphalt Mixtures
• ASTM D8138 – Standard Specification for Preformed Silicone Joint Sealing System for Bridges
• ASTM D8139 – Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction
• ASTM D8140 – Standard Guide for the Use of Foundry Sand in Asphalt Mixtures
• ASTM D8125 – Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)
• ASTM D8078 – Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues
• ASTM D8079 – Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor
• ASTM D8044 – Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures
• ASTM D8055 – Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards
• ASTM D8021 – Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel
• ASTM D7981 – Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor
• ASTM D7942 – Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas
• ASTM D7944 – Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven
• ASTM D7906 – Standard Practice for Recovery of Asphalt Binder from Solution Using Toluene and the Rotary Evaporator
• ASTM D7870/D7870M – Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure
• ASTM D7741/D7741M – Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer
• ASTM D7643 – Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
• ASTM D7585/D7585M – Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
• ASTM D7552 – Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
• ASTM D7553 – Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
• ASTM D7564/D7564M – Standard Practice for Construction of Asphalt-Rubber Cape Seal
• ASTM D7495 – Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials
• ASTM D7496 – Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
• ASTM D7497 – Standard Practice for Recovering Residue from Emulsified Asphalt Using Low-Temperature Evaporative Technique
• ASTM D75/D75M – Standard Practice for Sampling Aggregates
• ASTM D7460 – Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending (Withdrawn 2019)
• ASTM D7428 – Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
• ASTM D7402 – Standard Practice for Identifying Cationic Emulsified Asphalts
• ASTM D7403 – Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
• ASTM D7404 – Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Balance Analyzer
• ASTM D7405 – Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
• ASTM D7369 – Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test
• ASTM D7370/D7370M – Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
• ASTM D7312 – Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST) (Withdrawn 2019)
• ASTM D7313 – Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry
• ASTM D7226 – Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
• ASTM D7227/D7227M – Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus
• ASTM D7228 – Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
• ASTM D7229 – Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor (Withdrawn 2021)
• ASTM D7196 – Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples
• ASTM D7175 – Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
• ASTM D7172 – Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared (Withdrawn 2022)
• ASTM D7173 – Standard Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt
• ASTM D7174 – Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
• ASTM D7113/D7113M – Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
• ASTM D7115 – Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
• ASTM D7116 – Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
• ASTM D7063/D7063M – Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples
• ASTM D7064/D7064M – Standard Practice for Open-Graded Friction Course (OGFC) Asphalt Mixture Design
• ASTM D70/D70M – Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)
• ASTM D7000 – Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples
• ASTM D6995 – Standard Test Method for Determining Field VMA Based on the Maximum Specific Gravity of an Asphalt Mixture (Gmm)
• ASTM D6997 – Standard Test Method for Distillation of Emulsified Asphalt
• ASTM D6998 – Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
• ASTM D6999 – Standard Practice for Miscibility of Emulsified Asphalts
• ASTM D6937 – Standard Test Method for Determining Density of Emulsified Asphalt
• ASTM D6951/D6951M – Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
• ASTM D6934 – Standard Test Method for Residue by Evaporation of Emulsified Asphalt
• ASTM D6935 – Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
• ASTM D6936 – Standard Test Method for Determining Demulsibility of Emulsified Asphalt
• ASTM D692/D692M – Standard Specification for Coarse Aggregate for Asphalt Paving Mixtures
• ASTM D6924 – Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
• ASTM D6925 – Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor
• ASTM D6926 – Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
• ASTM D6927 – Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures
• ASTM D6928 – Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
• ASTM D6929 – Standard Practice for Evaluating the Effect of Freezing on Emulsified Asphalts
• ASTM D6930 – Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
• ASTM D693 – Standard Specification for Crushed Aggregate for Macadam Pavements (Withdrawn 2008)
• ASTM D6931 – Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures
• ASTM D6932/D6932M – Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures
• ASTM D6933 – Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
• ASTM C1252 – Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

Previous12