Skip to content

Home
FSC
AIA
- List of AIA/NAS
ASME
- ASME Boiler and Pressure Vessel Code
ASTM
- ASTM Annual Book
- List of ASTM
SAE
- List of SAE
Your Favorite
Contact Us
English
- 日本語

Search for:

List of ISO Standards

30411 standards

ISO 10081-1 – Classification of dense shaped refractory products — Part 1: Alumina-silica
ISO 10080 – Refractory products — Classification of dense, shaped acid-resisting products
ISO 10082 – Plastics — Phenolic resins — Classification and test methods
ISO 10081-4 – Classification of dense shaped refractory products — Part 4: Special products
ISO 10081-3 – Classification of dense shaped refractory products — Part 3: Basic products containing from 7 % to 50 % residual carbon
ISO 10086-1 – Coal — Methods for evaluating flocculants for use in coal preparation — Part 1: Basic parameters
ISO 10084 – Solid fertilizers — Determination of mineral-acid-soluble sulfate content — Gravimetric method
ISO 10083 – Oxygen concentrator supply systems for use with medical gas pipeline systems
ISO 10088 – Small craft — Permanently installed fuel systems
ISO 10087 – Small craft — Craft identification — Coding system
ISO 10086-2 – Coal — Methods for evaluating flocculants for use in coal preparation — Part 2: Flocculants as filter aids in rotary vacuum filtration systems
ISO 10093 – Plastics — Fire tests — Standard ignition sources
ISO 10092 – High breaking load steel wire ropes — Specifications
ISO 1009 – Photography — Paper dimensions — Rolls for printers
ISO 10094-1 – Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 1: Main characteristics to include in the supplier’s literature
ISO 10095 – Coffee — Determination of caffeine content — Method using high-performance liquid chromatography
ISO 10094-2 – Pneumatic fluid power — Electro-pneumatic pressure control valves — Part 2: Test methods to determine main characteristics to include in the supplier’s literature
ISO 10098 – Wireline diamond core drilling equipment — System CSSK
ISO 10097-2 – Wireline diamond core drilling equipment — System A — Part 2: Inch units
ISO 10097-1 – Wireline diamond core drilling equipment — System A — Part 1: Metric units
ISO 10100 – Hydraulic fluid power — Cylinders — Acceptance tests
ISO 1010 – Photography — Colour paper for general use — Sizes of sheet material
ISO 10099 – Pneumatic fluid power — Cylinders — Final examination and acceptance criteria
ISO 10101-3 – Natural gas — Determination of water by the Karl Fischer method — Part 3: Coulometric procedure
ISO 10101-2 – Natural gas — Determination of water by the Karl Fischer method — Part 2: Volumetric procedure
ISO 10101-1 – Natural gas — Determination of water by the Karl Fischer method — Part 1: General requirements
ISO 10104 – Assembly tools for screws and nuts — Double-headed box wrenches, deep offset and modified offset — Outside dimensions
ISO 10103 – Assembly tools for screws and nuts — Doubled-headed box wrenches, flat and offset — Outside dimensions and test torques
ISO 10102 – Assembly tools for screws and nuts — Double-headed open-ended engineers’ wrenches — Outside dimensions
ISO 10109 – Optics and photonics — Guidance for the selection of environmental tests
ISO 10106 – Cork stoppers — Determination of global migration
ISO 10109-1 – Optics and photonics — Environmental requirements — Part 1: General overview, terms and definitions, climatic zones and their parameters
ISO 10109-4 – Optics and optical instruments — Environmental requirements — Part 4: Test requirements for telescopic systems
ISO 10109-12 – Optics and optical instruments — Environmental requirements — Part 12: Conditions of transport for optical instruments
ISO 10109-11 – Optics and optical instruments — Environmental requirements — Part 11: Optical instruments for outdoor conditions of use
ISO 10109-8 – Optics and photonics — Environmental requirements — Part 8: Test requirements for extreme conditions of use
ISO 10109-7 – Optics and optical instruments — Environmental requirements — Part 7: Test requirements for optical measuring instruments
ISO 10109-6 – Optics and photonics — Environmental requirements — Part 6: Test requirements for medical optical instruments
ISO 10110-10 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 10: Table representing data of optical elements and cemented assemblies
ISO 10110-1 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 1: General
ISO 1011 – Photography — Colour paper for roll paper printers — Sizes of rolls
ISO 10110-13 – Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 13: Laser irradiation damage threshold
ISO 10110-12 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 12: Aspheric surfaces
ISO 10110-11 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 11: Non-toleranced data
ISO 10110-18 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae
ISO 10110-17 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 17: Laser irradiation damage threshold
ISO 10110-14 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 14: Wavefront deformation tolerance
ISO 10110-3 – Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 3: Material imperfections — Bubbles and inclusions
ISO 10110-2 – Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 2: Material imperfections — Stress birefringence
ISO 10110-19 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 19: General description of surfaces and components
ISO 10110-6 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 6: Centring tolerances
ISO 10110-5 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 5: Surface form tolerances
ISO 10110-4 – Optics and optical instruments — Preparation of drawings for optical elements and systems — Part 4: Material imperfections — Inhomogeneity and striae
ISO 10110-9 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 9: Surface treatment and coating
ISO 10110-8 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 8: Surface texture
ISO 10110-7 – Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections
ISO 10115 – Essential oil of tarragon (Artemisia dracunculus L.)
ISO 10113 – Metallic materials — Sheet and strip — Determination of plastic strain ratio
ISO 10111 – Metallic and other inorganic coatings — Measurement of mass per unit area — Review of gravimetric and chemical analysis methods
ISO 10120 – Carbon fibre — Determination of linear density
ISO 1012 – Photography — Films in sheets and rolls for general use — Dimensions
ISO 10119 – Carbon fibre — Determination of density
ISO 10121-1 – Test method for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 1: Gas-phase air cleaning media
ISO 10121-3 – Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 3: Classification system for GPACDs applied to treatment of outdoor air
ISO 10121-2 – Test methods for assessing the performance of gas-phase air cleaning media and devices for general ventilation — Part 2: Gas-phase air cleaning devices (GPACD)
ISO 10124 – Seamless and welded (except submerged arc-welded) steel tubes for pressure purposes — Ultrasonic testing for the detection of laminar imperfections
ISO 10123 – Adhesives — Determination of shear strength of anaerobic adhesives using pin-and-collar specimens
ISO 10122 – Reinforcement materials — Tubular braided sleeves — Basis for a specification
ISO 10129 – Plain bearings — Testing of bearing metals — Resistance to corrosion by lubricants under static conditions
ISO 10126-2 – Banking — Procedures for message encipherment (wholesale) — Part 2: DEA algorithm
ISO 10126-1 – Banking — Procedures for message encipherment (wholesale) — Part 1: General principles
ISO 10131-1 – Foldaway beds — Safety requirements and tests — Part 1: Safety requirements
ISO 10130 – Cosmetics — Analytical methods — Nitrosamines: Detection and determination of N-nitrosodiethanolamine (NDELA) in cosmetics by HPLC, post-column photolysis and derivatization
ISO 1013 – Coke — Determination of bulk density in a large container
ISO 10133 – Small craft — Electrical systems — Extra-low-voltage d.c. installations
ISO 10132 – Textiles — Textured filament yarn — Definitions
ISO 10131-2 – Foldaway beds — Safety requirements and tests — Part 2: Test methods
ISO 10135 – Geometrical product specifications (GPS) — Drawing indications for moulded parts in technical product documentation (TPD)
ISO 10134 – Small craft — Electrical devices — Lightning-protection systems
ISO 10136-1 – Glass and glassware — Analysis of extract solutions — Part 1: Determination of silicon dioxide by molecular absorption spectrometry
ISO 10136-4 – Glass and glassware — Analysis of extract solutions — Part 4: Determination of aluminium oxide by molecular absorption spectrometry
ISO 10136-3 – Glass and glasssware — Analysis of extract solutions — Part 3: Determination of calcium oxide and magnesium oxide by flame atomic absorption spectrometry
ISO 10136-2 – Glass and glassware — Analysis of extract solutions — Part 2: Determination of sodium oxide and potassium oxide by flame spectrometric methods
ISO 10137 – Bases for design of structures – Serviceability of buildings and walkways against vibrations
ISO 10136-6 – Glass and glassware — Analysis of extract solutions — Part 6: Determination of boron(III) oxide by molecular absorption spectrometry
ISO 10136-5 – Glass and glassware — Analysis of extract solutions — Part 5: Determination of iron(III) oxide by molecular absorption spectrometry and flame atomic absorption spectrometry
ISO 10139-2 – Dentistry — Soft lining materials for removable dentures — Part 2: Materials for long-term use
ISO 10139-1 – Dentistry — Soft lining materials for removable dentures — Part 1: Materials for short-term use
ISO 10138 – Steel and iron — Determination of chromium content — Flame atomic absorption spectrometric method
ISO 10140-2 – Acoustics — Laboratory measurement of sound insulation of building elements — Part 2: Measurement of airborne sound insulation
ISO 10140-1 – Acoustics — Laboratory measurement of sound insulation of building elements — Part 1: Application rules for specific products
ISO 1014 – Coke — Determination of true relative density, apparent relative density and porosity
ISO 10140-5 – Acoustics — Laboratory measurement of sound insulation of building elements — Part 5: Requirements for test facilities and equipment
ISO 10140-4 – Acoustics — Laboratory measurement of sound insulation of building elements — Part 4: Measurement procedures and requirements
ISO 10140-3 – Acoustics — Laboratory measurement of sound insulation of building elements — Part 3: Measurement of impact sound insulation
ISO 10144 – Steels for the reinforcement and prestressing of concrete — Certification scheme for steel bars and wires
ISO 10143 – Carbonaceous materials for the production of aluminium — Calcined coke for electrodes — Determination of the electrical resistivity of granules
ISO 10142 – Carbonaceous materials for use in the production of aluminium — Calcined coke — Determination of grain stability using a laboratory vibration mill
ISO 10146 – Crosslinked polyethylene (PE-X) and crosslinked medium density polyethylene (PE-MDX) — Effect of time and temperature on expected strength
ISO 10145-2 – End mills with brazed helical hardmetal tips — Part 2: Dimensions of end mills with 7/24 taper shank

Previous 234 Next

KikakuMaster's goal is to be an insightful source and community for industrial specifications and standards to help engineers.

We see challenges with locating, searching and sharing engineering specs, standards and knowledge.

We began developing a website where engineers could discuss, debate and share their knowledge of various specs and standards.

AIA/NAS
ASTM
AWS
ISO
SAE

Contact Us
Latest News

5935 - Connectors, Electrical (4357) 8455 - Badges and Insignia (3093) 8010 - Paints, Dopes, Varnishes, and Related Products (2046) 6515 - Medical and Surgical Instruments, Equipment, and Supplies (1907) ISDF (1827) 4730 - Hose, Pipe, Tube, Lubrication, and Railing Fittings (1823) ISDA (1776) FACR (1647) 5960 - Electron Tubes and Associated Hardware (1630) 6145 - Wire and Cable, Electrical (1629) 6505 - Drugs and Biologicals (1343) 6625 - Electrical and Electronic Properties Measuring and Testing Instruments (1241) 6640 - Laboratory Equipment and Supplies (1187) 5120 - Hand Tools, Nonedged, Nonpowered (1124) 6810 - Chemicals (1114) MISC (1045) 5930 - Switches (1012) 5306 - Bolts (996) 5340 - Hardware, Commercial (953) 8305 - Textile Fabrics (910) 5310 - Nuts and Washers (864) 5950 - Coils and Transformers (856) 8140 - Ammunition and Nuclear Ordnance Boxes, Packages and Special Containers (797) 6520 - Dental Instruments, Equipment, and Supplies (790) ISDD (786) 5910 - Capacitors (783) 5305 - Screws (781) 9330 - Plastics Fabricated Materials (759) 5905 - Resistor (753) 6530 - Hospital Furniture, Equipment, Utensils, and Supplies (745) 5945 - Relays and Solenoids (733) 5961 - Semiconductor Devices and Associated Hardware (707) 6240 - Electric Lamps (662) 8415 - Clothing, Special Purpose (660) 5330 - Packing and Gasket Materials (583) SESS (581) ISDN (581) 5940 - Lugs, Terminals, and Terminal Strips (564) 8030 - Preservative and Sealing Compounds (554) 4720 - Hose and Flexible Tubing (552) 1375 - Demolition Materials (549) 6610 - Flight Instruments (540) PACK (539) 8915 - Fruits and Vegetables (531) 1377 - Cartridge and Propellant Actuated Devices and Components (524)

© All rights reserved. • kikakumaster.com