List of AWS Standards

• AWS C3.5M/C3.5 – SPECIFICATION FOR INDUCTION BRAZING
• AWS C3.6M/C3.6 – SPECIFICATION FOR FURNACE BRAZING
• AWS C3.7M/C3.7 – SPECIFICATION FOR ALUMINUM BRAZING
• AWS C3.7M/C3.7-2011 – SPECIFICATION FOR ALUMINUM BRAZING (HISTORICAL)
• AWS C3.8M/C3.8 – SPECIFICATION FOR THE ULTRASONIC PULSE-ECHO EXAMINATION OF BRAZED JOINTS
• AWS C3.9M/C3.9 – SPECIFICATION FOR RESISTANCE BRAZING
• AWS C4.1 – CRITERIA FOR DESCRIBING OXYGEN-CUT SURFACES, AND OXYGEN CUTTING SURFACE ROUGHNESS GAUGE
• AWS C4.2/C4.2M – RECOMMENDED PRACTICES FOR OXYFUEL GAS CUTTING TORCH OPERATION
• AWS C4.3/C4.3M – RECOMMENDED PRACTICES FOR OXYFUEL GAS HEATING TORCH OPERATION
• AWS C4.4/C4.4M – RECOMMENDED PRACTICES FOR HEAT SHAPING AND STRAIGHTENING WITH OXYFUEL GAS HEATING TORCHES (HISTORICAL)
• AWS C4.5M – UNIFORM DESIGNATION SYSTEM FOR OXYFUEL NOZZLES
• AWS C4.6M – THERMAL CUTTING-CLASSIFICATION OF THERMAL CUTS-GEOMETRIC PRODUCT SPECIFICATION AND QUALITY TOLERANCES
• AWS C3.14M/C3.14 – STANDARD METHOD FOR EVALUATION OF BRAZED JOINTS USING VISUAL AND METALLOGRAPHIC TECHNIQUES
• AWS C6.1 – RECOMMENDED PRACTICES FOR FRICTION WELDING
• AWS C3.2M/C3.2 – STANDARD METHOD FOR EVALUATING THE STRENGTH OF BRAZED JOINTS (HISTORICAL)
• AWS C6.2/C6.2M – SPECIFICATION FOR FRICTION WELDING OF METALS (HISTORICAL)
• AWS C3.3 – RECOMMENDED PRACTICES FOR THE DESIGN, MANUFACTURE, AND EXAMINATION OF CRITICAL BRAZED COMPONENTS
• AWS C7.1M/C7.1 – RECOMMENDED PRACTICES FOR ELECTRON BEAM WELDING AND ALLIED PROCESSES
• AWS C3.4M/C3.4 – SPECIFICATION FOR TORCH BRAZING
• AWS C7.2M – RECOMMENDED PRACTICES FOR LASER BEAM WELDING, CUTTING, AND ALLIED PROCESSES (HISTORICAL)
• AWS BHCP9 – ALUMINUM CONTROLLED ATMOSPHERE BRAZING
• AWS C1.1M/C1.1 – RECOMMENDED PRACTICES FOR RESISTANCE WELDING (HISTORICAL)
• AWS C1.4M/C1.4 – SPECIFICATION FOR RESISTANCE WELDING OF CARBON AND LOW-ALLOY STEELS
• AWS C1.5 – SPECIFICATION FOR THE QUALIFICATION OF RESISTANCE WELDING TECHNICIANS (HISTORICAL)
• AWS C2.16/C2.16M – GUIDE FOR THERMAL SPRAY OPERATOR QUALIFICATION PROGRAMS
• AWS C2.18 – GUIDE FOR THE PROTECTION OF STEEL WITH THERMAL SPRAYED COATINGS OF ALUMINUM AND ZINC AND THEIR ALLOYS AND COMPOSITES
• AWS C2.19/C2.19M – SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS TO MACHINE ELEMENTS FOR OEM AND REPAIR
• AWS C2.20/C2.20M – SPECIFICATION FOR THERMAL SPRAYING ZINC ANODES ON STEEL REINFORCED CONCRETE
• AWS BHCP13 – SPECIFICATIONS AND STANDARDS
• AWS C2.21M/C2.21 – SPECIFICATION FOR THERMAL SPRAY EQUIPMENT ACCEPTANCE INSPECTION (HISTORICAL)
• AWS BHCP2 – Torch Brazing
• AWS C2.23M/C2.23 – SPECIFICATION FOR THE APPLICATION OF THERMAL SPRAY COATINGS (METALLIZING) OF ALUMINUM , ZINC,AND THEIR ALLOYS AND COMPOSITES FOR THE CORROSION PROTECTION OF STEEL
• AWS BHCP3 – Induction Brazing
• AWS C2.25/C2.25M – SPECIFICATION FOR THERMAL SPRAY FEEDSTOCK-WIRE AND RODS (HISTORICAL)
• AWS BHCP4 – Furnace Brazing
• AWS C3.11M/C3.11 – SPECIFICATION FOR TORCH SOLDERING
• AWS BHCP5 – Dip Brazing
• AWS BHCP6 – RESISTANCE BRAZING
• AWS BHCP7 – DIFFUSION BRAZING
• AWS BHCP8 – WIDE GAP DIFFUSION BRAZING REPAIR
• AWS BHCM2 – COPPER AND COPPER ALLOYS
• AWS BHCM7 – TITANIUM AND TITANIUM ALLOYS
• AWS BHCM8 – REFRACTORY METALS: NIOBIUM, MOLYBDENUM, TANTALUM, AND TUNGSTEN
• AWS BHCM9 – MAGNESIUM AND MAGNESIUM ALLOYS
• AWS BHC5 – PRECLEANING AND SURFACE PREPARATION
• AWS BHCP1 – Introduction to the Brazing Processes
• AWS BHC6 – ASSEMBLY AND FIXTURING
• AWS BHCP10 – OTHER BRAZING PROCESSES
• AWS BHC7 – CORROSION OF BRAZED JOINTS
• AWS BHCP11 – BRAZE WELDING
• AWS BHC8 – INSPECTION OF BRAZED JOINTS
• AWS BHCP12 – HEALTH, SAFETY, AND ENVIRONMENT
• AWS BHC9 – CODES AND OTHER STANDARDS
• AWS BHCF7 – Corrosion of Brazed Joints
• AWS BHCM1 – ALUMINUM AND ALUMINUM ALLOYS
• AWS BHCM10 – PRECIOUS METALS
• AWS BHCM13 – Cemented Carbides and Cermets
• AWS BHCM14 – Graphite and Carbon-Carbon Composites
• AWS BHCM15 – Superhard Materials: Diamond and Cubic Boron Nitride
• AWS BHCM18 – Honeycomb Structures
• AWS BHC19 – BRAZE WELDING
• AWS BHC34 – HONEYCOMB STRUCTURES
• AWS BHC2 – BRAZEMENT DESIGN
• AWS BHC35 – PIPE AND TUBING
• AWS BHC20 – ALUMINUM AND ALUMINUM ALLOY
• AWS BHC36 – DIAMOND
• AWS BHC21 – GRAPHITE AND CARBON-CARBON COMPOSITES
• AWS BHC4 – FLUXES AND ATMOSPHERES
• AWS BHC22 – CEMENTED CARBIDES AND CERMETS
• AWS BHC23 – CAST IRON
• AWS BHC24 – CERAMICS
• AWS BHC25 – COPPER AND COPPER ALLOYS
• AWS BHC26 – LOW-CARBON, LOW-ALLOY, AND TOOL SHEETS
• AWS BHC27 – MAGNESIUM AND MAGNESIUM ALLOYS
• AWS BHC29 – PRECIOUS METALS
• AWS BHC3 – BRAZING FILLER METALS
• AWS BHC30 – REACTIVE METALS: TITANIUM, ZIRCONIUM, AND BERYLIUM
• AWS BHC31 – REFRACTORY METALS: NIOBIUM, MOLYBDENUM, TANTALUM, AND TUNGSTEN
• AWS BHC32 – STAINLESS STEELS
• AWS BHC33 – ELECTRON TUBES AND VACUUM EQUIPMENT
• AWS B5.16 – SPECIFICATION FOR THE QUALIFICATION OF WELDING ENGINEERS (HISTORICAL)
• AWS B5.17 – SPECIFICATION FOR THE QUALIFICATION OF WELDING FABRICATORS (HISTORICAL)
• AWS B5.2 – SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTOR SPECIALISTS AND WELDING INSPECTOR ASSISTANTS (HISTORICAL)
• AWS B5.4 – SPECIFICATION FOR THE QUALIFICATION OF WELDER TEST FACILITIES (HISTORICAL)
• AWS B5.5 – SPECIFICATION FOR THE QUALIFICATION OF WELDING EDUCATORS
• AWS B5.9 – SPECIFICATION FOR THE QUALIFICATION OF WELDING SUPERVISORS (HISTORICAL)
• AWS BHC1 – BASICS OF BRAZING
• AWS BHC10 – SAFETY AND HEALTH
• AWS BHC11 – INTRODUCTION TO THE BRAZING PROCESSES
• AWS BHC12 – TORCH BRAZING
• AWS BHC13 – INDUCTION BRAZING
• AWS BHC14 – FURNACE BRAZING
• AWS B4.0M – STANDARD METHODS FOR MECHANICAL TESTING OF WELDS (METRIC CUSTOMARY UNITS)
• AWS BHC15 – DIP BRAZING
• AWS B5.1 – SPECIFICATION FOR THE QUALIFICATION OF WELDING INSPECTORS
• AWS BHC16 – RESISTANCE BRAZING
• AWS B5.14 – SPECIFICATION FOR THE QUALIFICATION OF WELDING SALES REPRESENTATIVES
• AWS BHC17 – DIFFUSION BRAZING
• AWS B5.15 – SPECIFICATION FOR THE QUALIFICATION OF RADIOGRAPHIC INTERPRETERS
• AWS BHC18 – OTHER BRAZING PROCESSES

Previous234Next