List of AIA/NAS Standards

• NAS1047 – TURNBUCKLE ASSEMBLY, FORGED CARBON STEEL, JAW AND JAW (FOR GROUND SUPPORT EQUIPMENT)
• NAS1129 – THREADED, SELF-CLINCHING, STANDOFF
• NAS1130 – Coil, Helical, Insert, Screw Thread, Free Running and Self Locking, Tangless
• NAS846 – CAP, PIPE THREAD, PROTECTIVE, DUST AND MOISTURE SEAL
• NAS847 – Caps and Plugs, Protective, Dust and Moisture Seal
• NAS947 – CAP-PROTECTIVE, BEADED TUBE ASSEMBLY
• NAS843 – PLUG-TUBING, PROTECTIVE, DUST AND MOISTURE SEAL
• NAS844 – Cap – Tubing, Protective, Dust and Moisture Seal
• NAS845 – PLUG, MACHINE SCREW, PROTECTIVE, PLASTIC
• NAS840 – PLUG, PIPE THREAD, PROTECTIVE, DUST AND MOISTURE SEAL
• NAS841 – CAPS, PROTECTIVE, DUST AND MOISTURE SEAL FOR BEAM SEAL FITTINGS
• NAS842 – PLUGS, PROTECTIVE, FLARELESS TUBE END (METAL)
• NAS839 – Cap – Beaded Hose Connection, Plastic, Protective
• NAS837 – PLUG-PROTECTIVE, ELECTRICAL CONNECTOR
• NAS838 – Plugs-Protective, Flareless Tube End (Plastic)
• NAS834 – Cap or Plug – Protective, Plain Tube or Hole
• NAS835 – Cap-Protective, Flared Fitting (Metal)
• NAS836 – Plug-Protective, Flared Tube, Hose Assembly or MS33649 Boss
• NAS831 – Cap-Protective, Electrical Connector
• NAS832 – Cap-Protective, Flared Fitting (Plastic)
• NAS833 – Plug-Protective, Flared Hose or Tube Assembly
• NAS818 – PLUG-PROTECTIVE, FLARED TUBE, HOSE ASSEMBLY OR MS33649 BOSS
• NAS819 – CAP – PROTECTIVE, FLANGED FITTING (NO S/S DOCUMENT)
• NAS820 – PLUG – PROTECTIVE, ELECTRICAL CONNECTOR
• NAS815 – PLUG – PROTECTIVE FLARED HOSE OR TUBE ASSEMBLY
• NAS816 – CAP OR PLUG – PROTECTIVE, PLAIN TUBE OR HOLE (NO S/S DOCUMENT)
• NAS817 – CAP – PROTECTIVE, FLARED FITTING
• NAS813 – CAP – PROTECTIVE, ELECTRICAL CONNECTOR
• NAS814 – CAP – PROTECTIVE, FLARED FITTING
• NAS622 – HOOK, SUPPORT – ELECTRONIC EQUIPMENT CLAMP
• NAS573 – CLAMP ASSEMBLY – ELECTRONIC EQUIPMENT
• NAS574 – PIN, REAR MOUNTING – ELECTRONIC EQUIPMENT
• NAS578 – Retainer, Floating Barrel Nut
• NAS399 – Latch, Push Button, Adjustable  (No S/S Document)
• NAS451 – PLUG BUTTON
• NAS559 – Lock – Rod End (Key Type) (S/S by NASM14198)
• NAM14290 – CLAMP, LOOP, CUSHIONED, RECTANGULAR, METRIC
• NAS5 – Rod End, Threaded, Alloy Steel, Flash Welding Type
• NAS170 – Clevis Engine Control Rod, Adjustable
• NA0211THRUNA0213 – Post, Electrical-Mechanical Equipment, Swage Type, Metric  (No S/S Document)
• NA0221THRUNA0224 – Post, Electrical-Mechanical Equipment, Internal Thread Type, Metric  (No S/S Document)
• NAM14289 – Strap, Retaining, Cushioned, Rectangular, Two-Piece, Metric
• NA0165 – Post, Electrical-Mechanical Equipment, Swage Type, Metric (No S/S Document)
• NA0166ANDNA0167 – Insert, Molded-in. CSK Clearance Hole, Sandwich Panel, AL Alloy and CRES, Metric (No S/S Document)
• NA0201THRUNA0204 – POST, ELECTRICAL-MECHANICAL EQUIPMENT, STUD TYPE, METRIC
• NA0121ANDNA0122 – Bracket, 90 Degree Angle, 2-Rivet Attach, Metric  (No S/S Document)
• NA0157ANDNA0158 – PIN, QUICK RELEASE, SELF-RETAINING, POSITIVE LOCKING, SINGLE ACTING, “T” HANDLE, METRIC
• NA0161 – PIN, QUICK RELEASE, POSITIVE LOCKING SINGLE ACTING, METRIC
• NA0119ANDNA0120 – Bracket, 90 Degree Angle, 2-Bolt Attach, Metric  (No S/S Document)
• NAAMM-A202.1 – GRATING, METAL BAR MANUAL, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• NAS1598 – WASHER SEALING ( W/DOD EXCEPTIONS) (NO S/S DOCUMENT)
• NAS1612 – PACKING, ETHYLENE PROPYLENE PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, PHOSPHATE ESTER RESISTANT -65 DEG. F TO 250/300 DEG. F
• NAS1611 – PACKING, ETHYLENE PROPYLENE PREFORMED O-RING PHOSPHATE ESTER RESISTANT (-65 DEG. F TO 250/300 DEG. F)
• NAS617 – Packing, Performed, Straight Thread Tube Fitting Boss, Synthetic Lubricant Resistant
• NAS1412 – Gasket, Sealing, Custom Design
• NAS1523 – Packing With Retainer
• NAS1613 – PACKING, PREFORMED, ETHYLENE PROPYLENE RUBBER, SEAL ELEMENT
• NASM124651THRU124690 – Insert, CRES Helical Coil Fine Thread, 1 DIA Nominal Length
• NASM124691THRU124730 – Insert, Cres Helical Coil Fine Thread, 1-1/2 DIA Nominal Length
• NASM124731THRU124770 – Insert, CRES Helical Coil Fine Thread, 2 DIA Nominal Length
• NASM124771THRU124810 – Insert, Cres Helical Coil Fine Thread, 2-1/2 DIA Nominal Length
• NASM124811THRU124850 – Insert, Cres Helical Coil Fine Thread, 3 Dia Nominal Length
• NASM122236THRU122275 – Insert, Cres Helical Coil Coarse Thread, 3 DIA Nominal Length
• NASM122076THRU122115 – Insert, Cres Helical Coil Coarse Thread, 1 Dia Nominal Length
• NASM122116THRU122155 – Insert, CRES Helical Coil Coarse Thread 1-1/2 DIA Nominal Length
• NASM122156THRU122195 – Insert, Cres Helical Coil Coarse Thread, 2 Dia Nominal Length
• NASM122196THRU122235 – Insert, Cres Helical Coil Coarse Thread, 2-1/2 Dia Nominal Length
• NASM27981 – Fasteners, Snap, Style 2A (Small Wire Spring Clamp Type)
• NASM27983 – Fasteners, Snap, Style 4 (Three Way Locking Type)
• NASM27984 – FASTENERS, SNAP, STYLE 5 (SCALLOPED BUTTON HEAD TYPE)
• NASM27986 – Fasteners, Snap, Style 7 (Rivet Type)
• NASM33537 – Insert, Screw Thread, Helical Coil, Inch Series, Coarse and Fine Thread, Standard Assembly Dimensions for
• NASM22529-1 – Grommet, Composition, Edging
• NASM22529-2 – Grommet, Cushion, Composition, Edging
• NASM22978 – Fastener, Rotary, Quick-Operating, High-Strength
• NASM25420 – Fasteners, Straight, Headed, Swaged Collar Limitations for use of
• NASM27980 – Fasteners, Snap, Style 2 (Regular Wire Spring Clamp Type)
• NASM21332 – Fastener-Snapslide
• NASM22529 – GROMMET, EDGING
• NASM21325 – Stud – Style III Snapslide Fastener
• NASM21326 – STUD – STYLE IV SNAPSLIDE FASTENER
• NASM21327 – Fastener Installation – Snapslide
• NASM20652 – EYELETS, METALLIC, AND EYELET WASHERS, METALLIC
• NASM20652-1 – Eyelets, Metallic, Rolled Flange Type; And Eyelet Washer
• NASM21209 – Insert, Screw Thread, Coarse and Fine, Screw Locking, Helical Coil, CRES
• NASM21266 – GROMMET, PLASTIC, EDGING
• NASM21323 – Stud – Style I Snapslide Fastener
• NASM16491-2 – GROMMET, METALLIC, OBLONG, WITH FLAT WASHER (TYPE IV)
• NASM16491-3 – GROMMET, METALLIC, OBLONG, WITH RAISED WASHER (TYPE V)
• NASM17731 – Fastener, Rotary, Quick – Operating, Flush Head, Floating Type, 2210 Lbs Min Tensile Strength
• NASM17732 – FASTENER, ROTARY, QUICK – OPERATING, PROTRUDING HEAD FLOATING TYPE, 2210 LBS MIN TENSILE STRENGTH
• NASM20230 – Grommets, Mettalic, Plain and Rolled Rim, with Washer, Type I and Type III
• NASM8846 – Inserts, Screw-Thread, Helical Coil
• NASM16491 – Grommet, Metallic, General Specification For
• NASM16491-1 – Grommet, Metallic, Plain, With Toothed Washer (Type II)
• NASM3498 – Screw Assembly, Panel
• NASM5591 – Fasteners; Panel; Nonstructural
• NAS1674 – FASTENER – BLIND, INTERNALLY THREADED, EXTERNAL SLEEVE, LIGHTWEIGHT, MILLABLE HEAD, SELF LOCKING
• NAS1675 – Fastener, Blind, Internally Threaded, External Sleeve Self-Locking
• NAS1699 – Fastener – Blind, Internal Threaded, External Sleeve, General Purpose, Protruding Head, Self Locking (S/S by MS3470)

Previous234Next