List of 9330 - Plastics Fabricated Materials Standards

• ASTM-E162 – Surface Flammability of Material Using a Radiant Heat Energy Source
• ASTM-D6779 – Polyamide Molding and Extrusion Materials (PA), Standard Classification System for and Basis of Specification for
• ASTM-D6778 – Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
• ASTM-D5948 – Compounds, Molding, Thermosetting
• ASTM-D5436 – Cast Poly (Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
• ASTM-D5229/D5229M – Properties, Moisture Absorption, and Equilibrium Conditioning of Polymer Matrix Composite Materials
• ASTM-D5213 – Film,Polymetric Resin,for Electrical Insulation and Dielectric Applications
• ASTM-D5205 – System for Polyetherimide (PEI) Materials
• ASTM-D5204 – Materials, Molding and Extrusion, Polyamide (PAI)
• ASTM-D4976 – Polyethylene Plastics Molding and Extrusion Materials
• ASTM-D4892 – Pitch, Solid, (Helium Pycnometer Method), Density of
• ASTM-D4802 – Sheet, Plastic, Poly (Methylmethacrylate) Acrylic
• ASTM-D4801 – Polyethylene Sheeting in Thickness of 0.25MM (0.010 In.) and Greater
• ASTM-D4673 – MOLDING AND EXTRUSION MATERIALS, ACRYLONITRILE-BUTADIENE-STYRENE (ABS), PLASTICS AND ALLOYS
• ASTM-D4634 – Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
• ASTM-D4617 – Phenolic Compounds, (PF) (No S/S Document)
• ASTM-D4591 – Temperatures and Heats, Determining, of Transition of Fluoropolymers by Differential Scanning Calorimetry
• ASTM-D4549 – Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
• ASTM-D4507 – THERMOPLASTIC POLYESTER (TPES) MATERIALS (NO S/S DOCUMENT)
• ASTM-D4473 – Plastics: Dynamic Mechanical Properties: Cure Behavior
• ASTM-D4397 – Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
• ASTM-D4350 – Plastics and Fillers Corrosivity Index of
• ASTM-D4225 – Sheeting, Styrene-Butadiene (No S/S Document)
• ASTM-D4216 – Poly(Vinyl Chloride), Rigid, (PVC) and Related PVC and Chlorinated Poly (Vinyl Chloride) (CPVC) Building Products Compounds
• ASTM-D4203 – Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
• ASTM-D4181 – Acetal (POM) Molding and Extrusion Materials (S/S by ASTM-D6778)
• ASTM-D4102 – Fibers, Carbon, Thermal Oxidative Resistance of
• ASTM-D4101 – Polypropylene Injection and Extrusion Materials
• ASTM-D4092 – Plastics: Dynamic Mechanical Properties
• ASTM-D4067 – Materials, Molding and Extrusion, Reinforced and Filled Poly (Phenylene Sulfide) (PPS) Injection, using ASTM Methods
• ASTM-D4066 – Nylon Injection and Extrusion Materials (PA), Standard Classification System for
• ASTM-D4065 – Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
• ASTM-D4020 – Materials, Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion
• ASTM-D4019 – PLASTICS, MOISTURE IN PHOSPHORUS PENTOXIDE, BY COULOMETRIC REGENERATION OF (NO S/S DOCUMENT)
• ASTM-D4000 – Plastic, Specifying Materials
• ASTM-D3935 – Material, Polycarbonate (PC) Unfilled and Reinforced
• ASTM-D3892 – Plastics, Packaging/Packing of
• ASTM-D3846 – Plastics, Reinforced, in Plane Shear Strength of
• ASTM-D3841 – GLASS-FIBER-REINFORCED POLYESTER PLASTIC PANELS
• ASTM-D3800 – Fibers, High Modulus, Density of
• ASTM-D3595 – POLYCHLOROTRIFLUOROETHYLENE (PCTFE) EXTRUDED PLASTIC SHEET AND FILM
• ASTM-D3575 – MATERIALS, FLEXIBLE CELLULAR, MADE FROM OLEFIN POLYMERS
• ASTM-D3530/D3530M – Standard Test Method for Volatiles Content of Composite Material Prepreg
• ASTM-D3529/D3529M – Matrix Solids Content and Matrix Content of Composite Prepreg
• ASTM-D3479 – COMPOSITES, RESIN MATRIX, TENSION-TENSION FATIGUE OF ORIENTED FIBER
• ASTM-D3418 – Polymers by Differential Scanning Calorimetry, Transition Temperatures and Enthalpies of Fusion and Crystallization of
• ASTM-D3417 – Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry (DSC) (No S/S Document)
• ASTM-D3369 – Film, Resin Cast, Polytetrafluoroethylene (PTFE) (No S/S Document)
• ASTM-D3368 – Sheet and Film, FEP-Fluorocarbon
• ASTM-D3308 – Tape, Resin Skived, PTFE
• ASTM-D3307 – Perfluoroalkoxy (PFA) – Fluorocarbon resin Molding and Extrusion Materials
• ASTM-D3295 – PTFE Tubing, Miniature Beading and Spiral Cut Tubing
• ASTM-D3293 – SHEET, RESIN MOLDED, PTFE (NO S/S DOCUMENT)
• ASTM-D3275 – Materials, E-CTFE-Fluoroplastic Molding, Extrusion, and Coating
• ASTM-D3222 – Materials, Molding Extrusion and Coating, Unmodified Poly(Vinylidene Fluoride) (PVDF)
• ASTM-D3221 – MOLDING & EXTRUSION MATERIALS, THERMOPLASTIC POLYTEREPHTHALATE – 26 JUN 81 (REFER TO ASTM D4507)
• ASTM-D3220 – MOLDING & EXTRUSION MATERIALS, REINFORCED THERMOPLASTIC POLYESTER – 26 JUN 81 (REFER TO ASTM-D4507)
• ASTM-D3159 – Materials, Molding and Extrusion, Modified Etfe-Fluoropolymer
• ASTM-D3083 – Sheeting, Plastic, for Pond, Canal, and Reservoir Lining, Flexible Poly(Vinyl Chloride), Standard Specification for (No S/S Document)
• ASTM-D3045 – Plastics without Load, Heat Aging of
• ASTM-D3029 – SPECIMENS, FLAT RIGID PLASTIC, IMPACT RESISTANCE OF, BY MEANS OF A TUP (FALLING WEIGHT) (NO S/S DOCUMENT)
• ASTM-D3020 – Sheeting, Plastic, for Pond, Canal, and Reservoir Lining, Polyethylene and Ethylene Copolymer, Standard Specification for (No S/S Document)
• ASTM-D3014 – Plastics, Rigid Thermoset Cellular, in a Vertical Position, Flame Height, Time of Burning, and Loss of Weight of (Np S/S Document)
• ASTM-D3013 – Compounds, Epoxy Molding
• ASTM-D2990 – Plastics, Tensile, Compressive, and Flexural Creep and Creep-Rupture of
• ASTM-D2863 – Plastics, Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of (Oxygen Index)
• ASTM-D2856 – Plastics by the Air Pychometer, Rigid Cellular, Open Cell Content of, Standard Test Method for (No S/S Document)
• ASTM-D2843 – Plastics, Density of Smoke from the Burning of Decomposition of
• ASTM-D2842 – Water Absorption of Rigid Cellular Plastics
• ASTM-D2734 – Plastics, Reinforced, Void Content of
• ASTM-D2733 – PLASTICS, STRUCTURAL REINFORCED, AT ELEVATED TEMPERATURES, INTERLAMINAR SHEAR STRENGTH OF – 24 DEC 70 (USE ASTM D3846)
• ASTM-D2732 – FILM AND SHEETING, PLASTIC, UNRESTRAINED LINEAR THERMAL SHRINKAGE OF
• ASTM-D2584 – Resins, Cured Reinforced, Ignition Loss of
• ASTM-D2583 – PLASTICS, RIGID, BY MEANS OF A BARCOL IMPRESSOR, INDENTATION HARDNESS OF
• ASTM-D2582 – Film, Plastic, and Thin Sheeting, Puncture-Propagation Tear Resistance of
• ASTM-D2565 – PLASTICS INTENDED FOR OUTDOOR APPLICATIONS, XENON-ARC EXPOSURE OF
• ASTM-D2471 – Resins, Reacting Thermosetting, Gel Time and Peak Exothermic Temperature of (No S/S Document)
• ASTM-D2457 – Films, Plastic, and Solid Plastics, Specular Gloss of
• ASTM-D2411 – CELLULOSE ACETATE BUTYRATE FILM AND SHEETING FOR FABRICATING AND FORMING (NO S/S DOCUMENT)
• ASTM-D2393 – EPOXY RESINS AND RELATED COMPONENTS, VISCOSITY OF (NO S/S DOCUMENT)
• ASTM-D2344/D2344M – Polymer Matrix composite Materials and Their Laminates, Short- Beam Strength of
• ASTM-D2343 – Glass Fiber Strands, Yarns, and Rovings used in Reinforced Plastics, Tensile Properties of
• ASTM-D2290 – Plastic or Reinforced Plastic Pipe, Apparent Hoop Tensile Strength
• ASTM-D2287 – Vinyl, Nonrigid, Chloride Polymer and Copolymer Molding and Extrusion Compounds
• ASTM-D2126 – Plastics, Response of Rigid Cellular, to Thermal and Humid Aging
• ASTM-D2122 – Pipe and Fittings, Thermoplastic, Determining Dimensions of
• ASTM-D2116 – Standard Specification for FEP Resin Molding and Extrusion Materials
• ASTM-D2115 – Oven Heat Stability of Poly (Vinyl Chloride) Compositions
• ASTM-D2103 – Polyethylene Film and Sheeting
• ASTM-D1929 – Temperature, Ignition of Plastics, Determining, Standard Test Method for (No S/S Document)
• ASTM-D1928 – TEST SHEETS AND TEST SPECIMENS, POLYETHYLENE, COMPRESSION-MOLDED, PREPARATION OF (NO S/S DOCUMENT)
• ASTM-D1925 – YELLOWNESS INDEX OF PLASTICS (NO S/S DOCUMENT)
• ASTM-D1922 – Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
• ASTM-D1921 – Materials, Plastic, Particle Size (Sieve Analysis) of, Standard Test Methods for
• ASTM-D1898 – PLASTICS, SAMPLING OF (NO S/S DOCUMENT)
• ASTM-D1897 – MATERIALS, THERMOPLASTIC MOLDING AND EXTRUSION, INJECTION MOLDING TEST SPECIMENS OF (NO S/S DOCUMENT)
• ASTM-D1895 – Materials, Plastic, Apparent Density, Bulk Factor, and Pourability of
• ASTM-D1894 – Film, Plastic, and Sheeting, Static and Kinetic Coefficients of Friction of
• ASTM-D1893 – FILM, PLASTIC, BLOCKING OF, STANDARD TEST METHOD OF (NO S/S DOCUMENT)
• ASTM-D1892 – STYRENE-BUTADIENE MOLDING AND EXTRUSION MATERIALS (S/S BY ASTM-D4549)

Previous123Next