List of 9320 - Rubber Fabricated Materials Standards

• SAE-AMS-R-83283 – Rubber Silicone, High Strength, Cabin Pressure Seal Material, Diaphragm Type
• SAE-AMS-R-6855 – Elastomer, Synthetic, Sheets, Strips, Molded or Extruded Shapes
• SAE-AMS-T-6841 – Tape and Sheet, Adhesive, Rubber and Cork Composition
• SAE-AMS-R-6130 – RUBBER, CELLULAR, CHEMICALLY BLOWN (NO S/S DOCUMENT)
• SAE-AMS-R-5001 – Rubber Cellular Sheet, Molded And Hand-Built Shapes; Latex Foam
• SAE-AMS3571/1 – Resin, Polyether Urethane (EU) Casting, Flexible, Solid, Unfilled, 45 Durometer “A”
• SAE-AMS3571 – Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled
• SAE-AMS3367 – RUBBER COMPOUND, SILICONE ROOM TEMPERATURE VULCANIZING, 1,200.000 CENTIPOISES VISCOSITY DUROMETER 55 – 70 (NO S/S DOCUMENT)
• SAE-AMS3366 – RUBBER COMPOUND, SILICONE ROOM TEMPERATURE VULCANIZING, 55,000 CENTIPOISES VISCOSITY DUROMETER 55 – 70 (NO S/S DOCUMENT)
• SAE-AMS3365 – RUBBER COMPOUND, SILICONE ROOM TEMPERATURE VULCANIZING, 35,000 CENTIPOISES VISCOSITY DUROMETER 40 – 55 (NO S/S DOCUMENT)
• SAE-AMS3364 – RUBBER COMPOUND, ROOM TEMPERATURE VULCANIZING, 50.000 CENTIPOISES VISCOSITY, SHORT POT LIFE DUROMETER 35 – 55 (NO S/S DOCUMENT)
• SAE-AMS3363 – RUBBER COMPOUND, SILICONE ROOM TEMPERATURE VULCANIZING, 50.000 CENTIPOISES VISCOSITY DUROMETER 30 – 45 – 30 (NO S/S DOCUMENT)
• SAE-AMS3362 – RUBBER COMPOUND, ROOM TEMPERATURE VULCANIZING, 15,000 CENTIPOSES VISCOSITY DUROMETER 35 – 55 (NO S/S DOCUMENT)
• SAE-AMS3356 – SILICONE (VMQ) RUBBER LUBRICATING OIL AND COMPRESSION SET RESISTANT, ELECTRICAL GRADE 55-65
• SAE-AMS3346 – SILICONE RUBBER, 1000 PSI (6.89 MPA) MINIMUM TENSILE STRENGTH 55-65 DUROMETER
• SAE-AMS3345 – SILICONE RUBBER, 1000 PSI (6.90 MPA) TENSILE STRENGTH, 45-55
• SAE-AMS3344 – RUBBER, SILICONE 1800 PSI 45 – 55
• SAE-AMS3332 – Elastomer: Methyl Phenyl Vinyl Silicone Rubber (PVMQ) Extreme Low-Temperature Resistant 15 – 30 Type A Hardness
• SAE-AMS3326 – RUBBER, FLUOROSILICONE, FUEL AND OIL RESISTANT 50-65 (S/S BY SAE-AMS3325)
• SAE-AMS3320 – Silicone (Vmq) Rubber Sheet, Glass Cloth Reinforced Heat And Weather Resistant 60-80
• SAE-AMS3315 – RUBBER SHEET, SILICONE (VMQ) GLASS CLOTH REINFORCED
• SAE-AMS3305 – SILICONE RUBBER, GENERAL PURPOSE 80 DUROMETER
• SAE-AMS3304 – SILICONE RUBBER, GENERAL PURPOSE 70 DUROMETER
• SAE-AMS3303 – SILICONE RUBBER, GENERAL PURPOSE, 60 DUROMETER
• SAE-AMS3302 – SILICONE RUBBER, GENERAL PURPOSE, 50 DUROMETER
• SAE-AMS3301 – SILICONE RUBBER, GENERAL PURPOSE, 40 DUROMETER
• SAE-AMS3273 – CHLOROPRENE (CR) RUBBER SHEET, NYLON CLOTH REINFORCED WEATHER RESISTANT
• SAE-AMS3270 – Chloroprene (Cr) Rubber Sheet, Cotton Fabric Reinforced, Weather Resistant
• SAE-AMS3250 – RUBBER, SYNTHETIC, AND CORK COMPOSITION, GENERAL PURPOSE, SOFT
• SAE-AMS3244 – CHLOROPRENE (CR) RUBBER, FLAME RESISTANT 65-75
• SAE-AMS3243 – Chloroprene (CR) Rubber, Flame Resistant 55-65
• SAE-AMS3241 – CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT 55-65
• SAE-AMS3240 – CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT 35-45
• SAE-AMS3239 – Butyl (IIR) Rubber, Phosphate Ester Resistant 85-95
• SAE-AMS3238 – Butyl (IIR) Rubber, Phosphate Ester Resistant, 65-75
• SAE-AMS3237 – Butyl (IIR) Rubber, Phosphate Ester Resistant 34-35
• SAE-AMS3232 – Asbestos and Synthetic Rubber Sheet Hot Oil Resistant (No S/S Document)
• SAE-AMS3229 – Acrylonitrile Butadiene (NBR) Rubber, Hot Oil Resistant, Low Swell, 75 – 85
• SAE-AMS3228 – ACRYLONITRILE BUTADIENE (NBR) RUBBER, HOT OIL AND COOLANT RESISTANT, LOW SWELL 65 – 75 (NO S/S DOCUMENT)
• SAE-AMS3227 – Acrylonitrile Butadiene (Nbr) Rubber, Hot Oil And Coolant Resistant, Low Swell, 55-65
• SAE-AMS3226 – Acrylonitrile Butadiene (Nbr) Rubber, Hot Oil And Coolant Resistant, Low Swell, 45-55
• SAE-AMS3222 – Rubber Hot Oil Resistant, Synthetic, High Swell 45-55
• SAE-AMS3220 – Rubber, Synthetic, General Purpose, Fluid Resistant, 55-65
• SAE-AMS3215 – Acrylonitrile Butadiene (Nbr) Rubber, Aromatic Fuel Resistant, 65-75
• SAE-AMS3212 – Acrylonitrile Butadiene (Nbr) Rubber Aromatic Fuel Resistant 55-65
• SAE-AMS3209 – CHLOROPRENE (CR) RUBBER WEATHER RESISTANT 65-75
• SAE-AMS3208 – CHLOROPRENE (CR) RUBBER WEATHER RESISTANT 45-55
• SAE-AMS3207 – Chloroprene (Cr) Rubber Weather Resistant 25-35
• SAE-AMS3205 – Synthetic Rubber Low-Temperature Resistant 45-55
• SAE-AMS3204 – RUBBER, SYNTHETIC LOW-TEMPERATURE RESISTANT 25-35
• SAE-AMS3202 – Nitrile (Nbr) Rubber Dry Heat Resistant 55-65
• SAE-AMS3201 – Nitrile (Nbr) Rubber Dry Heat Resistant, 35-45
• SAE-AMS3200 – Nitrile (Nbr) Rubber Petroleum-base Hydraulic Fluid Resistant, 55 – 65
• SAE-AMS3199 – Sponge, Chloroprene (Cr) Rubber Firm
• SAE-AMS3198 – Sponge, Chloroprene (Cr) Rubber Medium Stiffness
• SAE-AMS3197 – Sponge, Chloroprene (Cr) Rubber Soft
• SAE-AMS3196 – Sponge, Silicone Rubber Closed Cell, Firm
• SAE-AMS3195 – Silicone Rubber Sponge, Closed Cell, Medium
• SAE-AMS3194 – Silicone Rubber Sponge, Closed Cell, Firm, Extreme Low Temperature
• SAE-AMS3193 – Silicone Rubber Sponge, Closed Cell, Medium, Extreme Low Temperature
• SAE-AMS2810 – Identification and Packaging Elastomeric Products
• ASTM-E443 – SULFUR IN ORGANIC COMPOUNDS BY OXYGEN FLASK COMBUSTION (NO S/S DOCUMENT)
• ASTM-D6576 – Rubber, Flexible Cellular, Chemically Blown
• ASTM-D4075 – MATERIALS, COMPOUNDING, FLAME ATOMIC ABSORPTION TECHNIQUE-DETERMINATION OF METALS
• ASTM-D4004 – Rubber-Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis
• ASTM-D3767 – RUBBER-MEASUREMENT OF DIMENSIONS
• ASTM-D3738 – Hospital Sheeting, Rubber-Coated Cloth
• ASTM-D3677 – Rubber-Identification by Infrared Spectrophotometry
• ASTM-D3667 – Rubber Seals Used in Flat-Plate Solar Collectors
• ASTM-D3574 – Materials, Flexible Cellular-Slab, Bonded and Molded Urethane Foams
• ASTM-D3453 – Materials, Flexible Cellular-Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
• ASTM-D3452 – Rubber-Identification by Pyrolysis-Gas Chromatography
• ASTM-D3389 – Fabrics, Coated, Abrasion Resistance (Rotary Platform Abrader)
• ASTM-D3388 – COATED FABRIC – STIFFENING AT LOW TEMPERATURES (TORSIONAL WIRE APPARATUS) – 27 NOV 81
• ASTM-D3254 – Fabric-Reinforced, Vulcanized Rubber Sheeting for Pond, Canal, and Reservoir Lining (No S/S Document)
• ASTM-D3253 – VULCANIZED RUBBER SHEETING FOR POND, CANAL, AND RESERVOIR LINING, STANDARD SPECIFICATION FOR (NO S/S DOCUMENT)
• ASTM-D3183 – Rubber – Preparation of Pieces for Test Purposes from Products
• ASTM-D3182 – Rubber-Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets
• ASTM-D3171 – Constituent Content of Composite Materials
• ASTM-D3137 – Rubber Property-Hydrolytic Stability
• ASTM-D2934 – SEALS, RUBBER-COMPATIBILITY WITH SERVICE FLUIDS (NO S/S DOCUMENT)
• ASTM-D2707 – TESTING HARD RUBBER IN TENSION (S/S BY FED-STD-601)
• ASTM-D2702 – Rubber Chemicals-Determination of Infrared Absorption Characteristics
• ASTM-D2632 – Rubber Property-Resilience by Vertical Rebound
• ASTM-D2240 – Rubber Property-Durometer Hardness
• ASTM-D2231 – Rubber Properties in Forced Vibration (S/S by ASTM-D5992))
• ASTM-D2227 – Natural Rubber (NR) Technical Grades
• ASTM-D2137 – Rubber Property-Brittleness Point of Flexible Polymers and Coated Fabrics
• ASTM-D2136 – FABRICS, COATED, LOW-TEMPERATURE BEND TEST, STANDARD TEST METHOD FOR
• ASTM-D2084 – Rubber Property-Vulcanization Using Oscillating Disk Cure Meter
• ASTM-D2000 – Rubber Products in Automotive Applications
• ASTM-D1917 – RUBBER PROPERTY-SHRINKAGE OF RAW AND COMPOUNDED HOT-POLYMERIZE STYRENE-BUTADIENE RUBBER (SBR)
• ASTM-D1870 – Oven, Tubular, Elevated Temperature Aging Using A (No S/S Document)
• ASTM-D1667 – Vinyl Chloride Polymers and Copolymers (Closed-Cell Foam), Flexible Cellular Materials
• ASTM-D1646 – Standard Test Methods for Rubber-Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)
• ASTM-D1630 – Rubber Property-Abrasion Resistance (Footwear Abrader)
• ASTM-D1565 – CELLULAR MATERIALS, FLEXIBLE, VINYL CHLORIDE POLYMERS AND COPOLYMERS (OPEN-CELL FOAM) (NO S/S DOCUMENT)
• ASTM-D1456 – Rubber Property-Elongation at Specific Stress
• ASTM-D1418 – Rubber and Rubber Latices-Nomenclature
• ASTM-D1416 – RUBBER FROM SYNTHETIC SOURCES-CHEMICAL ANALYSIS (NO S/S DOCUMENT)

12Next