List of 9150 - Oils and Greases: Cutting, Lubricating, and Hydraulic Standards

• SAE-HIR1415 – Hydraulic, for Submersible Vehicles, Design Guide for (No S/S Document)
• SAE-HIR1149 – Vehicle, Marine, Hydraulic Fluids, for (No S/S Document)
• SAE-J2363 – LUBRICATING OIL, FOR WHEELED MILITARY VEHICLES WITH HEAVY-DUTY DIESEL ENGINES
• SAE-J2362 – LUBRICATING OIL, AUTOMOTIVE ENGINE, API SERVICE SM FOR MILITARY ADMINISTRATIVE SERVICE
• SAE-J2360 – Oil, Lubricating, Gear Multipurpose (Metric) Military use
• SAE-J1966 – Oils, Lubricating, Aircraft Piston Engine (Nondispersant Mineral Oil)
• SAE-J1899 – Oil, Lubricating, Aircraft Piston Engine (Ashless Dispersant)
• SAE-J1165 – FLUIDS, HYDRAULIC, REPORTING LEVELS OF CLEANLINESS
• SAE-J754 – Machinery, Construction and Industrial, Lubricant Types (No S/S Document)
• SAE-J753 – Maintenance Interval Chart
• SAE-J300 – ENGINE OIL VISCOSITY CLASSIFICATION
• SAE-J183 – ENGINE OIL PERFORMANCE AND ENGINE SERVICE CLASSIFICATION (OTHER THAN “ENERGY CONSERVING”)
• SAE-AS1241 – Fire Resistant Phosphate Ester Hydraulic Fluid for Aircraft
• SAE-AMS-G-6032 – Grease, Plug Valve, Gasoline And Oil Resistant, Nato Code Number G-363, Metric
• SAE-AMS-G-4343 – Grease, Pneumatic System
• SAE-AMS3151 – Fluid, Aircraft Compass (No S/S Document)
• SAE-AMS3056 – Lubricant, Instrument Bearing, Petroleum Base, Viscosity 35
• SAE-AMS3055 – Lubricant, Instrument Bearing, Petroleum Base, Viscosity 15
• SAE-AMS3054 – Oil, Lubricating, Low Temperature for -55 Deg. C (-67 Deg. F) Service
• SAE-AMS3021 – Fluid, Reference For Testing Di-ester (Polyol) Resistant Material
• SAE-AMS2629 – Fluid, Jet Reference
• SAE-AMS2530 – Tungsten Disulfide Coating, Thin Lubricating Film, Binder-Less Impingement Applied
• SAE-AIR4275 – Jet Reference Fluid Study for Fuel Tank Sealants
• NFPA-B93.30M – Fluid Power, Hydraulic-Contamination Analysis Data-Reporting Method (No S/S Document)
• ASTM-STP315 – Multicylinder Test Sequences for Evaluating Automotive Engine Oils (No S/S Document)
• ASTM-F313 – HYDRAULIC FLUIDS BY GRAVIMETRIC ANALYSIS, STANDARD TEST METHID FOR ISOLUBLE CONTAMINATION OF (NO S/S DOCUMENT)
• ASTM-E203 – Water Using Volumetric Karl Fischer Titration
• ASTM-D6547 – Corrosiveness of Lubricating Fluid to Bimetallic Couple
• ASTM-D6184 – Oil Separation from Lubricating Grease (Conical Sieve Method)
• ASTM-D5185 – Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
• ASTM-D5119 – Engine Oils, Automotive, in the CRC L-38 Spark-Ignition Engine, Evaluation of (No S/S Document)
• ASTM-D4951 – OILS, LUBRICATING BY INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY, DETERMINATION OF ADDITIVE ELEMENTS IN
• ASTM-D4927 – Lubricant and Additive Components-Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy, Elemental Analysis of
• ASTM-D4898 – Fluids, Hydraulic, By Gravimetric Analysis, Insoluble Contamination of
• ASTM-D4863 – Engine Lubricants, Gasoline, Lubricity of Two-Stroke-Cycle, Determination of
• ASTM-D4859 – Engines-TC, Gasoline, Two-Stroke-Cycle Spark-Ignition, Lubricants for
• ASTM-D4858 – Engines, Gasoline, Two-Stroke-Cycle, Tendency of Lubricants to Promote Preignition in
• ASTM-D4857 – Engines, Gasoline, Other than Outboards, Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle, Determination of the
• ASTM-D4741 – VISCOSITY, MEASURING, AT HIGH TEMPERATURE AND HIGH SHEAR RATE BY TAPERED-PLUG VISCOMETER
• ASTM-D4736 – OILS USED IN OIL COOLED BRONZE FACED FRICTION CLUTCHES, EVALUATING FRICTION RETENTION CHARACTERISTICS OF (NO S/S DOCUMENT)
• ASTM-D4684 – Engine Oils at Low Temperature, Determination of Yield Stress and Apparent Viscosity of
• ASTM-D4683 – Measuring Viscosity of New and used Engine Oils at High Shear Rate and High Temperature by Tapered Berarig Simulator Viscometer at 150 Degrees C
• ASTM-D4628 – BARIUM, CALCIUM, MAGNESIUM, AND ZINC IN UNUSED LUBRICATING OILS BY ATOMIC ABSORPTION SPECTROMETRY, ANALYSIS OF
• ASTM-D4624 – Viscosity, Measuring Apparent, by Capillary Viscometer at High Temperature and High-Shear Rates (No S/S Document)
• ASTM-D4289 – Grease and Fluids, Lubricating, Elastomer Compatibility of
• ASTM-D4177 – Petroleum and Petroleum Products, Automatic Sampling of
• ASTM-D4172 – Fluid, Lubricating, Wear Preventive Characteristics of (Four-Ball Method)
• ASTM-D4057 – Petroleum and Petroleum Products, Manual Sampling of
• ASTM-D4048 – Copper Corrosion from Lubricating Grease, Detection of
• ASTM-D4047 – Oils and Additives, Lubricating, by Quinoline Phosphomolybdate Method, Phosphorus in
• ASTM-D3374 – Yarns, Glass, Vinyl-Coated
• ASTM-D3337 – Greases, Lubricating, in Small Ball Bearings, Determining Life and Torque of (No S/S Document)
• ASTM-D3336 – Greases, Lubricating, in Ball Bearings at Elevated Temperatures, Life of
• ASTM-D2988 – Solvents, Water-Soluble Halide Ion in Halogenated Organic, and their Admixtures, Standard Test Methods for
• ASTM-D2879 – Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope
• ASTM-D2835 – Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
• ASTM-D2670 – Lubricants, Fluid, (Falex Pin and Vee Block Method), Measuring Wear Properties of
• ASTM-D2649 – Lubricants, Solid Film, Corrosion Characteristics of
• ASTM-D2625 – Film Lubricants, Solid, (Falex Pin and Vee Method), Endurance (Wear) Life and Load-Carrying Capacity of
• ASTM-D2622 – Sulfer in Petroleum Products by Wavelength Dispersive X-Ray Fluorscence Spectrometry
• ASTM-D2596 – Grease, Lubricating, Measurement of Extreme-Pressure Properties of, (Four-Ball Method)
• ASTM-D2595 – Greases, Lubricating, Over Wide-Temperature Range, Evaporation Loss of
• ASTM-D2550 – WATER SEPARATION CHARACTERISTICS OF AVIATION TURBINE FUELS, STANDARD TEST METHOD FOR (NO S/S DOCUMENT)
• ASTM-D2382 – HEAT OF COMBUSTION OF HYDROCARBON FUELS BY BOMB CALORIMETER (HIGH-PRECISION METHOD) (NO S/S DOCUMENT)
• ASTM-D2272 – Oils, Steam Turbine, by Rotating Pressure Vessel, Oxidation stability of
• ASTM-D2270 – Viscosity, Calculating, Index from Kinematic Viscosity at 40 and 100 Degrees C
• ASTM-D2265 – LUBRICATING GREASE, OVER WIDE TEMPERATURE RANGE, DROPPING POINT OF
• ASTM-D1947 – LOAD-CARRYING CAPACITY OF PETROLEUM OIL AND SYNTHETIC FLUID GEAR LUBRICANTS (NO S/S DOCUMENT)
• ASTM-D1831 – Grease, Lubricating, Roll Stability of
• ASTM-D1747 – Materials, Viscous, Refractive Index of, Standard Test Method of
• ASTM-D1740 – Fuels, Aviation Turbine, Luminometer Numbers of (No S/S Document)
• ASTM-D1403 – Cone Penetration of Lubrication Grease Using One-Quarter and One-Half Scale Cone Equipment
• ASTM-D1401 – Water Separability of Petroleum Oils and Synthetic Fluids
• ASTM-D1322 – Smoke Point of Kerosine and Aviation Turbine Fuel
• ASTM-D1319 – Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Absorption
• ASTM-D1159 – Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric _x000D_ Titration, Bromine Numbers of
• ASTM-D1092 – Greases, Lubricating, Measuring Apparent Viscosity of
• ASTM-D942 – OXIDATION STABILITY OF LUBRICATING GREASES BY THE OXYGEN BOMB METHOD
• ASTM-D937 – Cone Penetration of Petrolatum
• ASTM-D924 – Liquids, Electrical Insulating, Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of
• ASTM-D893 – Oils, Lubricating, Insolubles in Used
• ASTM-D877 – LIQUIDS, INSULATING, USING DISK ELECTRODES, DIELECTRIC BREAKDOWN VOLTAGE OF
• ASTM-D874 – Ash, Sulfated, from Lubricating Oils and Additives
• ASTM-D611 – Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
• ASTM-D566 – GREASE, LUBRICATING, DROPPING POINT OF
• ASTM-D341 – Liquid Petroleum Products, Viscosity-Temperature Charts for
• ASTM-D240 – HEAT OF COMBUSTION OF LIQUID HYDROCARBON FUELS BY BOMB CALORIMETER
• ASTM-D216 – GASOLINE, NATURAL, DISTILLATION OF – 26 AUG 77
• ASTM-D189 – Petroleum Products, Conradson Carbon Residue of
• ASTM-D130 – Copper, Corrosiveness to, from Petroleum Products by Copper Strip Test, Standard Test Method for
• ASTM-D93 – Cup Tester, Closed, Flash Point by Pensky-Martens
• ASTM-D92 – Flash and Fire Points by Cleveland Open Cup
• ASTM-D56 – Tester, Closed Cup, Flash Point by Tag
• API-MPMS-CH-11.1.14 – Chapter 11.1, Volume XIV, January 1982; Reaffirmed August 1987 (ANSI/ASTM-D1250) (IP200) (API-STD2540) (No S/S Document)
• API-MPMS-CH-11.1.13 – Chapter 11.1, Volume XIII, January 1982; Reaffirmed August 1987 (ANSI/ASTM-D1250) (IP-200) (API-STD-2540) (No S/S Document)
• MIL-HDBK-838 – Lubrication of Military Equipment
• MIL-HDBK-267 – Guide for Selection of Lubricants and Hydraulic Fluids for use in Shipboard Equipment
• MIL-HDBK-118 – Design Guide for Military Applications of Hydraulic Fluids
• MIL-HDBK-113 – Guide for the Selection of Lubricants, Functional Fluids, Preservatives and Speciality Products for use in Ground Equipment Systems
• QPL-J1966 – Lubricating Oils, Aircraft Piston Engine (Non-Dispersant Mineral Oil) (Replaced by the Qualified Products Database (QPD) See Notice 1 for Additional Information)

12Next