List of 5340 - Hardware, Commercial Standards

• MS21333 – CLAMP, LOOP-STEEL-PLAIN AND CUSHIONED (S/S BY NASM21333)
• MS21315 – STRAP, RETAINING, TWO HOLE, FOR TUBING (S/S BY NASM21315)
• MS21312 – Handwheel – Revolving Handle With Keyway
• MS21313 – PADLOCK SETS – INDIVIDUALLY KEYED AND KEYED ALIKE (S/S BY A-A-59486)
• MS21314 – STRAP, RETAINING, TWO HOLE, FOR PIPE, CONDUIT, AND CABLE (S/S BY NASM21314)
• MS21126 – Spacer, Grooved, Self-Retaining Bolt, Aluminum Alloy
• MS21128 – SPACER, GROOVED, SELF-RETAINING BOLT, CRES
• MS21310 – BOLT, HOOK, SUPPORT DRIVE FETTER THREAD (POLE LINE) (NO S/S DOCUMENT)
• MS21105 – CLAMP, LOOP, CUSHIONED, WEDGE, FLUID RESISTANT, 500 DEG. F, CRES, TYPP III, CLASS B (S/S BY MS21105)
• MS21106 – Clamp, Loop, Cushioned, 1200 Degrees F, Cres Type IV, Class B
• MS21122 – Clamp, Loop, Cushioned, Wedge, Polytetrafluoroethylene
• MS20257 – Hinge, Continuous
• MS21103 – CLAMP, PLAIN, SUPPORT, LOOP, AIRCRAFT, TYPE 1 CLASS A & B (USE AN 742)
• MS21104 – CLAMP, LOOP, CUSHIONED, WEDGE, FUEL, WEATHER RESISTANT, 212 DEG. F. TYPE II, CLASS A AND B (S/S BY MS21919)
• MS18072 – RING, HANDLING, AIR START COUPLING (S/S BY MS-14271)
• MS20000 – TURNBUCKLE ASSEMBLY – PIN EYE, LEFT AND RIGHT HAND
• MS20001 – Hinge, Butt Structural, Extruded
• MS18018 – SEAL, LEAD (S/S BY MS 51938)
• MS18034 – STRAP, CABLE, ADJUSTABLE, PLASTIC, TYPE I, CLASS 2 (USE MS 3367)
• MS18035 – STRAP, CABLE, IDENTIFICATION ADJUSTABLE, PLASTIC, TYPE 2, CLASS2 (USE MS 3368)
• MS18012 – Handle, Metal, Spring Bail Type
• MS18012A(I1) – Handle, Metal, Spring Bail Type
• MS18015 – Catch, Clamping and Strike (Concealed Spring Type)
• MS16993 – Plug, Fusible, Refrigerant – 12
• MS17821 – Strap, Cable, Adjustable, Self-Clinching, Plastic, Type I, Class I (Use MS3367)
• MS17822 – Strap, Cable, Identification, Adjustable, Self-Clinching Plastic, Type II, Class I (Use MS3368)
• MS15097 – KNOB, NICKEL-PLATED BRASS (FOR DRAWER LATCH FOR METAL FURNITURE)
• MS16227 – CHANNEL, DRAWER AND CASE FOR METAL FURNITURE
• MS16652 – DRAWER PULL-LATCH, METAL FURNITURE
• MS15094 – CAM STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15095 – ESCUTCHEON, LOCK SET PART (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15096 – T HANDLE WITH HEXAGON NUT, STEEL (FOR METAL SAFE LOCKER, TYPE NOS. 1, 3, 4, AND 6)
• MS15093 – STRAP, STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15091 – KEEPER, HANDLE, LOCK (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15092 – LATCH, STEEL (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15029 – BUMPER (FOR METAL FURNITURE) (FOR SHIPBOARD USE)
• MS15030 – HASP AND KEEPER (FOR METAL FURNITURE)
• MS15090 – LEVER HANDLE, LOCK (FOR CLOTHES AND CLEANING GEAR LOCKERS)
• MS15021 – HANDLE, T, 2-INCH, AND NUT (FOR METAL FURNITURE)
• MS15022 – CATCH, FRICTION (FOR METAL FURNITURE)
• MS15027 – LOCK, INSTALLATION OF (FOR METAL FURNITURE DRAWERS)
• MS15018 – HANDLE, RECESS, BRASS (FOR METAL FURNITURE)
• MS15019 – CATCH, PUSH BUTTON (FOR METAL FURNITURE)
• MS15020 – HANDLE, T, 2-1/2-INCH, AND NUT (FOR METAL FURNITURE)
• DS14487 – Clamp, Loop, Plastic, Wire Support, Metric (S/S by SAE-AS14487)
• DS14488 – Clamp, Loop, Plastic, Wire Support, Ribbed Inner Diameter, Metric (S/S by SAE-AS14244)
• DS14489 – Clamp, Loop, Metal, Plain, Support, Aircraft, Metric (S/S by SAE-MA14489)
• DS14290 – Clamp, Loop, Cushioned, Rectangular, Metric (S/S by NAM14290)
• DS14298 – Clamp Assembly, Cushioned Saddle, Metric (S/S by SAE-MA14298)
• DS14289 – Strap, Retaining, Cushioned, Rectangular, Two Piece, Metric (S/S by NASM14289)
• MS14271 – Handle, Coupling, Pneumatic Starter
• DS14272 – Clamp, Loop, Cushioned Elongated, Metric (S/S by SAE-MA14272)
• DS14273 – Strap, Retaining, Cushioned, Rectangular, Metric
• DS14244 – Clamp, Loop, Type, Bonding, Metric (S/S by SAE-AS14244)
• DS14269 – Hinge, Continuous, Metric
• DS14270 – Pin Hinge, Metric
• DS14241 – Clamp, Loop Type, Cushioned Support, Metric (S/S by SAE-MA14241)
• DS14242 – Clamp, Loop, Cushioned, Center Mounting, Metric (S/S by SAE-MA14242)
• DS14243 – Clamp, Loop, Nylon, Metric (S/S by SAE-AS14232)
• MS14109 – FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (WITH HOLDING CLAMP)
• MS14198 – LOCK, ROD END, EXTRA STRENGTH, HIGH PROFILE LUG (S/S BY NASM14198)
• MS14227 – LOCK, ROD END, IMPROVED STRENGTH, NAS LUG (S/S BY SAE-AS14227)
• MS9825 – CLAMP, LOOP CUSHIONED, JOGGLED, CORROSION RESISTING STEEL, .204 HOLE (S/S BY NAS1715)
• MS9826 – Clamp, Loop-Cushioned, Joggled, Corrosion Resistant Steel, .265 Hole
• MS14108 – FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (S/S BY MIL-F-85731/1)
• MS9601 – BRACKET, ANGLE, 90 DEG, CRES, .190 X .250 BOLT (S/S BY SAE-AS9601)
• MS9602 – BRACKET, ANGLE, 90 DEG., CRES .190 X .312 BOLT (S/S BY SAE-AS9602)
• MS9603 – BRACKET, ANGLE, 90 DEG., CRES .190 X .375 BOLT (S/S BY SAE-AS9603)
• MS9598 – BRACKET, ANGLE, 90 DEG., CADMIUM PLATED, .190 X .312 BOLT (S/S BY SAE-AS9598)
• MS9599 – BRACKET, ANGLE, 90 DEG., CADMIUM PLATED .190 X .375 BOLT (S/S BY SAE-AS9599)
• MS9600 – BRACKET, ANGLE, 90 DEG., CRES, .190 BOLT (S/S BY SAE-AS9600)
• MS9595 – BRACKET, ANGLE, 90 DEG., CRES, .190 X .375 BOLT (S/S BY SAE-AS9595)
• MS9596 – BRACKET, ANGLE, 90 DEG. STEEL .190 BOLT (S/S BY SAE-AS9596)
• MS9597 – BRACKET, ANGLE, 90 DEG., CADMIUM PLATED .190 X .250 BOLT (S/S BY SAE-AS9597)
• MS9592 – BRACKET, ANGLE, 90 DEG., CRES, .190 BOLT (S/S BY SAE-AS9592)
• MS9593 – BRACKET, ANGLE, 90 DEG. CRES AMS 5510, .190 X .250 BOLT (S/S BY SAE-AS9593)
• MS9594 – BRACKET, ANGLE, 90 DEG., CRES, .190 X .312 BOLT (S/S BY SAE-AS9594)
• MS9515 – Cushion, Loop Clamp – Multiple, 2-Tube, AMS3839 (No S/S Document)
• MS9551 – BRACKET, FLAT, STEEL, AMS 6350, CAD. PLATE (S/S BY SAE-AS9551)
• MS9552 – PLATE, MENDING (S/S BY SAE-AS9552)
• MS9514 – Cushion, Loop Clamp-Multiple, 3-Tube, AMS3839 (No S/S Document)
• MS9394 – STRAP, RETAINING-MULTIPLE TUBE, DETACHABLE CUSHION, AMS 5510 (S/S BY SAE-AS9394)
• MS9395 – BACKPLATE, RETAINING STRAP AMS 5510 (S/S BY SAE-AS9395)
• MS9391 – CLAMP, LOOP-MULTIPLE TUBE, DETACHABLE CUSHION, AMS 5510 (S/S BY SAE-AS9391)
• MS9392 – CUSHION, LOOP CLAMP – MULTIPLE, 3-TUBE, AMS 3303 (S/S BY SAE-AS9392)
• MS9393 – CUSHION, LOOP CLAMP – MULTIPLE, 2-TUBE, AMS 3303 (S/S BY SAE-AS9393)
• MS9367 – BRACKET-FLAT, CRES AMS 5510, .250 BOLT
• MS9379 – PLUG, EXPANSION – AMS 5510 (S/S BY SAE-AS9379)
• MS9380 – PLUG, EXPANSION-AMS 4003 (S/S BY SAE-AS9380)
• MS9354 – CLAMP, LOOP-ALUMINUM, .265 HOLE (S/S BY SAE-AS9354)
• MS9365 – BRACKET-FLAT, CRES AMS 5510, .190 BOLT
• MS9366 – BRACKET-FLAT, CRES AMS 5510, .190 X .250 BOLT (USE MS9552)
• MS9351 – CLAMP, LOOP-CUSHIONED, JOGGLED, ALUMINUM, .204 HOLE (S/S BY NAS1715)
• MS9352 – CLAMP, LOOP-CUSHIONED, JOGGLED, ALUMINUM, .265 HOLE (S/S BY NAS1715)
• MS9353 – CLAMP, LOOP-ALUMINUM, .204 HOLE (S/S BY SAE-AS9353)
• MS9349 – CLAMP, LOOP, CUSHIONED, JOGGLED, CRES, 0.204 HOLE (S/S BY SAE-AS9349)
• MS9350 – CLAMP, LOOP, CUSHIONED, JOGGLED, CRES, .265 HOLE (S/S BY NAS1715)
• MS9231 – BRACKET, ANGLE, 90 DEG. .190 X 375 BOLT (S/S BY SAE-AS9231)
• MS9228 – BRACKET, ANGLE, 90 DEG, 0.190 BOLT (S/S BY SAE-AS9228)
• MS9229 – BRACKET-90 DEG. ANGLE, AMS 5504, .190 X .250 BOLT

Previous678Next