List of 5330 - Packing and Gasket Materials Standards

• SAE-AMS3328 – Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 35-45 (No S/S Document)
• SAE-AMS3329 – Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant, High Strength 45-55  (No S/S Document)
• SAE-AMS3330 – Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 45-55  (No S/S Document)
• SAE-AMS3325 – Rubber, Fluorosilicone (FVMQ), Fuel and Oil Resistant 55 – 65
• SAE-AMS3260 – Rubber, Ethylene-Propylene-Diene (EPDM) Rubber General Purpose 45-55
• SAE-AMS3274 – ACRYLONITRILE BUTADIENE (NBR) RUBBER SHEET AND MOLDED SHAPES NYLON CLOTH REINFORCED FUEL RESISTANT
• SAE-AMS3275 – Sheet, Acrylonitrile Butadiene (Nbr) Rubber, Non-Asbestos Fiber, Fuel And Oil Resistant
• SAE-AMS3307 – RUBBER, SILICONE (VQM) LOW COMPRESSION SET, NON-OIL-RESISTANT 65-75
• SAE-AMS3323 – Sponge, Fluorosilicone (FVM) Rubber Closed Cell  (No S/S Document)
• SAE-AMS3218 – Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant, Low Compression, Set 85-95
• SAE-AMS3248 – ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER RESISTANT 55 – 65
• SAE-AMS3249 – Ethylene Propylene, (EPDM)Rubber, Hydrazine-Base-Fluid Resistant 75-85
• SAE-AMS3251 – RUBBER AND CORK COMPOSITION, SYNTHETIC GENERAL PURPOSE MEDIUM
• SAE-AMS3252 – RUBBER AND CORK COMPOSITION, SYNTHETIC GENERAL PURPOSE, FIRM (NO S/S DOCUMENT)
• SAE-AMS3217/2 – Test Slabs, Acrylonitrile Butadiene (NBR-L), Low Acrylonitrile, 65 – 75
• SAE-AMS3217/3 – Test Slabs, Chloroprene (CR) 70-80
• SAE-AMS3217/4 – Test Slabs, Fluoroelastomer (FKM), 65 – 75
• SAE-AMS3217/5 – Test Slabs, Fluorosilicone (FVMQ) 55 – 65
• SAE-AMS3217/6 – TEST SLABS, PHOSPHONITRILIC FLUOROELASTOMER (FZ) 65 – 75 (NO S/S DOCUMENT)
• SAE-AMS3213 – Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 75-85 (No S/S Document)
• SAE-AMS3214 – Acrylonitrile Butadiene (NBR) Rubber Aromatic Fuel Resistant 35-45 (No S/S Document)
• SAE-AMS3216 – Fluorocarbon (FKM) Rubber High-Temperature-Fluid Resistant Low Compression Set 70 to 80
• SAE-AMS3217 – Test Slabs, Standard Elastomer Stocks
• SAE-AMS3217/1 – Test Slabs, Acrylonitrile Butadiene (NBR-H), Medium-High Acrylonitrile, 65 – 75
• DIN3760 – ROTARY SHAFT LIP SEALS
• NAS617 – Packing, Performed, Straight Thread Tube Fitting Boss, Synthetic Lubricant Resistant
• NAS1412 – Gasket, Sealing, Custom Design
• NAS1523 – Packing With Retainer
• NAS1613 – PACKING, PREFORMED, ETHYLENE PROPYLENE RUBBER, SEAL ELEMENT
• ASTM-F147 – Flexibility of Non-Metallic Gasket Materials
• ASTM-F152 – Tension Testing of Nonmetallic Gasket Materials
• ASTM-F477 – Elastomer Seals (Gaskets) for Joining Plastic Pipe
• ASTM-F607 – GASKET MATERIALS TO METAL SURFACES, ADHESION OF
• ASTM-F2087 – Packing, Fiberglass, Braided, Rope and Wick
• ASTM-F146 – Fluid Resistance of Gasket Materials
• ASTM-F37 – Gasket Materials, Sealability of
• ASTM-F38 – GASKET MATERIAL, CREEP RELAXATION OF A
• ASTM-F64 – GASKET MATERIALS, CORROSIVE AND ADHESIVE EFFECTS OF, ON METAL SURFACES – 18 JUL 69 (USE ASTM F607)
• ASTM-F104 – Materials, Gasket, Nonmetallic
• ASTM-C864 – Gaskets, Seal, Setting Blocks, and Spacers, Dense Elastomeric Compression (No S/S Document)
• ASTM-C964 – Gasket, Lock-Strip, Glazing (No S/S Document)
• ASTM-D1414 – Rubber O-Rings
• ASTM-D1869 – Rings, Rubber, for Asbestos-Cement Pipe
• ASTM-F36 – Compressibility and Recovery of Gasket Materials
• ASME-B16.20 – Gaskets, Metallic, for Pipe Flanges – Ring-Joint, Spiral-Wound, and Jacketed
• ASME-B16.21 – Gaskets, Flat, Nonmetallic, for Pipe Flanges
• ASTM-C509 – Gasket and Sealing Material, Preformed, Elastomeric Cellular
• ASTM-C542 – Gaskets, Lock-Strip
• ASTM-C564 – Gaskets, Rubber for Cast Iron Soil Pipe and Fittings, Standard Specification for
• AN123951THRUAN124050 – PACKING, PERFORMED – AMS7270, ‘O’ RING (S/S BY SAE-AS3569)
• AN125901THRUAN125950 – PLUG, STRAIGHT THREAD, “O” RING SEAL, STEEL (S/S BY MS9015)
• AN6246 – RING-HYDRAULIC PACKING BACK UP (AFTER 21 AUG 1964 USE MS 35803)
• AN123020THRUAN123119 – GASKET-ALUMINUM-NON ASBESTOS, ANNULAR (S/S BY SAE-AS123020THRUAS123119)
• AN123851THRUAN123950 – PACKING, PERFORMED-AMS 7274 (O) RING (S/S BY SAE-AS3570)
• AN6228 – ADAPTER – “V” RING FEMALE HYDRAULIC PACKING (NO S/S DOCUMENT)
• AN6229 – ADAPTER, V RING MALE HYDRAULIC PACKING
• AN6230 – GASKET, “O” RING HYDRAULIC (S/S BY MS28775)
• AN6232 – FELT&STRIP PACKING GLAND (NO S/S DOCUMENT)
• AN6238 – Gasket, Hydraulic Replaceable Reservoir Type Filter Element
• AN4171 – GASKET ENGINE OIL CONNECTION 3 BOLT (NO S/S DOCUMENT)
• AN4172 – GASKET ENGINE OIL CONNECTION 4 BOLT (NO S/S DOCUMENT)
• AN6225 – Packing – “V” Ring Hydraulic
• AN6226 – Packing-“U” Cup Hydraulic
• AN6227 – Packing, O, Ring Hydraulic (S/S by MS28775)
• AN904 – Gasket and Upward Recognition Light Cover
• AN3067 – Seal Assembly – 3/8 Inch Conduit Boss
• AN3119 – Gasket – Common, Tail Position Light
• AN902 – GASKET – FLARED TUBE, UNIVERSAL FITTING (S/S BY AN6290)
• AN903 – GASKET, DOWNWARD RECOGNITION LIGHT COVER (NO S/S DOCUMENT)
• AN896 – GASKET, CABIN DOME-LIGHT COVER (NO S/S DOCUMENT)
• AN898 – GASKET, EXTERIOR LIGHT COVER
• AN899 – GASKET, FUSELAGE LIGHT – COVER SCREW (S/S BY SAE-AS8991)
• AN900 – GASKET, COPPER-ASBESTOS ANNULAR (USE MS-35769)
• AN901 – Gasket-Metal Tube Connection Seal
• MIL-HDBK-212 – Gasket Materials (Nonmetallic)
• MIL-HDBK-692 – A Guide to the Selection of Rubber O-Rings
• AN886 – GASKET, ANCHOR & LIGHT COVER (NO S/S DOCUMENT)
• AN887 – Gasket-Circular Formation Light Cover
• AN889 – GASKET, WING POSITION LIGHT COVER (NO S/S DOCUMENT)
• QPL-83461 – PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, IMPROVED PERFORMANCE AT 275 DEG. F (135 DEG. C) (REFER TO PRI-QPL-AMS-83461-2)
• QPL-87175 – PACKING, PREFORMED, PETROLEUM HYDRAULIC FLUID RESISTANT, PHOSPHONITRILIC FLOUROELASTOMER (NO S/S DOCUMENT)
• QPL-HH-P-46 – Packing, Asbestos, Sheet, Compressed (No S/S Document)
• QPL-AMS-P-5510 – Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 Degrees F to 160 Degrees F) (S/S by PRI-QPL-AMS-P-5510)
• QPL-83248 – Rubber, Fluorocarbon Elastomer, High Temperature, Fluid, and Compression Set Resistant (No S/S Document)
• QPL-25897 – RUBBER, HIGH TEMPERATURE, FLUID RESISTANT
• QPL-25988 – Rubber, Fluorosilicone Elastomer, Oil -, Hydraulic Fluid-, and Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes
• QPL-32187 – Gasket, Hybrid, Flat and Raised Face Flange, Fire Resistant, Shipboard Use (Replaced by the Qualified Products Database (QPD) see Notice 2 for Additional Information)
• QPL-32287 – Packing, Preformed, Petroleum Hydraulic Fluid Resistant (Replaced by the Qualified Products Database (QPD) see Notice 2 for Additional Information)
• QPL-45005 – SEAL, PLAIN AND SEAL, PLAIN, ENCASED: FLUID, RADIAL, SINGLE AND MULTIPLE LIP SEALING MEMBER, SPRING LOADED (NO S/S DOCUMENT)
• QPL-21610 – GASKET, HEAT EXCHANGER, VARIOUS CROSS SECTION RING, SYNTHETIC RUBBER (NO S/S DOCUMENT)
• QPL-24102 – GASKET AND PACKING MATERIAL, RUBBER, RESISTANT TO PETROLEUM-BASE LUBRICANTS, FOR USE IN AIR SYSTEMS UP TO 6,000 PSIG PRESSURE
• QPL-24696 – Gasket, Sheet, Non-Asbestos (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-24790 – Packing Material, Braided, Non-Asbestos (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-25732 – Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Limited Service at 275 Deg. F (135 Deg C) (Replaced by the Qualified Products Database (QPD) see Notice 1 for Additional Information)
• QPL-20084 – PACKING, RAMIE-FIBER (SYMBOL 1290)
• QPL-20241 – GASKET MATERIAL, WOOL FELT, IMPREGNATED ADHESIVE, PRESSURE-SENSITIVE (NO S/S DOCUMENT)
• QPL-21032 – GASKETS, METALLIC-ASBESTOS, SPIRAL WOUND (FOR ASA COMMERCIAL FLANGED JOINTS IN PIPING SYSTEMS)
• QPL-21099 – PACKING ASSEMBLIES, HYDRAULIC CONICAL AND V TYPES FIRE RESISTANT TYPE HYDRAULIC FLUIDS (NO S/S DOCUMENT)
• QPL-21569 – GASKET, CYLINDER LINER SEAL O-RING, SYNTHETIC RUBBER
• QPL-17416 – Packing Material, Metallic, Flexible, Symbol 1430

Previous123Next