List of 5330 - Packing and Gasket Materials Standards

• SAE-J110 – Seals – Testing of Radial Lip (No S/S Document)
• SAE-MA2515 – Ring-Back-Up, Port Connection, AMS3660 Metric
• SAE-MA2536 – Gasket, Metal C-Ring, Face Seal, Internal Pressure, UNS N07750 Silver Plated, Metric
• SAE-MA2537 – Gasket, Metal C-Ring, Groove Design, Face Type Internal Pressure, Metric
• SAE-AS38386 – PACKING, PREFORMED, AIR DUCT HOSE, GROUND COOLING
• SAE-AS51007 – Gasket, Rubber, Synthetic (No S/S Document)
• SAE-AS123020THRUAS123119 – GASKET – ALUMINUM – NON ASBESTOS, ANNULAR
• SAE-AS33931 – Packing, Preformed, Straight Thread Tube Fitting Boss, Hydraulic, -65 Degrees F To +275 Degrees F
• SAE-AS35769 – Gasket, Metallic, Encased, Annular, Copper
• SAE-AS27195 – Seal, Bonded, Aluminum Alloy 6060-T6, AMS4027, Mold in Groove, NBR Rubber, AMS-R-7362
• SAE-AS27196 – Seal, Bonded, 302 Corrosion Resistant Steel, AMS5516, Mold in Groove, Fluorocarbon Rubber, AMS7276
• SAE-AS27197 – Seal, Bonded, 302 Corrosion Resistant Steel, AMS5516, Mold in Groove, Silicone Rubber, AMS7268
• SAE-AS27198 – Seal, Bonded, 302 Corrosion Resistant Steel, AMS5516, Mold in Groove, Fluorocarbon Rubber, MIL-DTL-25988
• SAE-AS28772 – D Ring Seal for Shock Struts Molded from AMS-P-25732 Material
• SAE-AS9373 – GASKET – METAL O-RING, .062 TUBE X .010 WALL SILVER PLATED
• SAE-AS9374 – GASKET METAL O-RING, .094 TUBE X .006 WALL, SILVER PLATED
• SAE-AS9375 – GASKET-METAL O-RING, .094 TUBE X .010 WALL, SILVER PLATED
• SAE-AS9376 – GASKET-METAL O-RING, .125 TUBE X .010 WALL, SILVER PLATED
• SAE-AS27194 – Seal, Bonded, Aluminum Alloy 6061-T6, AMS4027, Mold in Groove, NBR Rubber, AMS-P-5315
• SAE-AS9204 – GASKET – METAL O-RING, .094 TUBE X .010 WALL, CRES
• SAE-AS9205 – GASKET – METAL O-RING, .125 TUBE X .010 WALL, CRES
• SAE-AS9371 – GASKET-METAL O-RING, .035 TUBE X .006 WALL, SILVER PLATED
• SAE-AS9372 – GASKET-METAL O-RING, .062 TUBE X .006 WALL, SILVER PLATED
• SAE-AS9203 – GASKET – METAL O-RING, .094 TUBE X .006 WALL, CRES
• SAE-AS9058 – RING – BACK-UP, BOSS CONNECTION, AMS3651
• SAE-AS9141 – GASKET – METAL O-RING, .035 TUBE X .006 WALL, CRES
• SAE-AS9142 – GASKET – METAL O-RING, .062 TUBE X .006 WALL, CRES
• SAE-AS9144 – GASKET – TYPE XX ENGINE ACCESSORY DRIVE
• SAE-AS9202 – GASKET – METAL O-RING, .062 TUBE X .010 WALL, CRES
• SAE-AS7283 – GASKETS, TYPE XX ENGINE ACCESSORY DRIVE CORROSION RESISTANT STEEL SCREEN REINFORCED CONTROLLED PERFORMANCE
• SAE-AS7325 – Gasket, Metal O-Ring Corrosion and Heat Resistant Steel Procurement Specification for
• SAE-AS8791 – RETAINERS, HYDRUALIC, AND PNEUMATIC, BACKUP-UP RINGS) , POLYTETRAFLUOROETHYLENE (PTFE) RESIN
• SAE-AS8791/1 – Retainer, Packing, Hydraulic and Pneumatic, Polytetrafluoroethylene, Single Turn (No S/S Document)
• SAE-AS8991 – GASKET, FUSELAGE LIGHT- COVER SCREW
• SAE-AS3496 – GASKET – TYPE XVI ENGINE ACCESSORY DRIVE
• SAE-AS3497 – Gasket-Type XIX Engine Accessory Drive
• SAE-AS3498 – Gasket – Engine Accessory Drive
• SAE-AS5316 – Storage of Elastomer Seals and Seal Assemblies which include an Elastomer Element Prior to Hardware Assembly
• SAE-AS5752 – Aerospace – Visual Inspection Standard for Elastomeric Sealing Elements Other than O-Rings
• SAE-AS3491 – GASKET – TYPE X OR XV ENGINE ACCESSORY DRIVE
• SAE-AS3492 – GASKET – TYPE XI ENGINE ACCESSORY DRIVE
• SAE-AS3493 – GASKET – TYPE XII, XIV A AND XIV B ENGINE ACCESSORY DRIVE
• SAE-AS3494 – GASKET – TYPE XIII ENGINE ACCESSORY DRIVE
• SAE-AS3495 – GASKET – TYPE XIV-C ENGINE ACCESSORY DRIVE
• SAE-AMS-R-83485 – Rubber, Fluorocarbon Elastomer, Improved Performance at Low Temperatures
• SAE-AMS-HH-G-101 – Gasket, Metallic Encased
• SAE-ARP5316 – Seals, Aerospace Elastomeric, Storage of, and Seal Assemblies which Include an Elastomer Element Prior to Hardware Assembly
• SAE-AS1895/7 – Seal, Type I and II Standard and Low Profile
• SAE-AS1895/23 – High Conformance Seal, Type I and II Standard and Low Profile
• SAE-AMS-R-7362 – Rubber, Synthetic, Solid, Sheet, Strip and Fabricated Parts, Synthetic Oil Resistant
• SAE-AMS-R-25988 – Rubber, Fluorosilicone Elastomer, Oil-and-Fuel-Resistant, Sheets, Strips, Molded Parts, and Extruded Shapes (No S/S Document)
• SAE-AMS-R-83285 – Rubber, Ethylene-Propylene, General Purpose
• SAE-AMS-R-83412 – Rubber, Ethylene-Propylene, Hydrazine Resistant
• SAE-AMS-P-83461 – Packing, Preformed, Petroleum Hydraulic Fluid Resistant, Improved Performance at AT 275 Deg. F (135 Deg. C)
• SAE-AMS-C-6183 – Cork And Rubber Composition Sheet; For Aromatic Fuel And Oil Resistant Gaskets
• SAE-AMS7490 – Rings, Flash Welded Corrosion and Heat Resistant Austenitic Steels, Austenitic-Type Iron, Nickel, or Cobalt Alloys, or Precipitation Hardenable Alloys
• SAE-AMS-P-5315 – Butadiene – Acrylonitrile (NBR) Rubber for Fuel-Resistant Seals 60 TO 70
• SAE-AMS-P-5510 – Packing, Preformed, Straight Thread Tube Fitting Boss, Type I Hydraulic (-65 DEG. F TO 160 DEG. F)
• SAE-AMS-P-5516 – Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Deg. F (S/S by MIL-DTL-5516)
• SAE-AMS7284/1 – RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL RESISTANT 65 – 75 SHORE A (NO S/S DOCUMENT)
• SAE-AMS7284/2 – RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL RESISTANT 75 – 85 SHORE A (NO S/S DOCUMENT)
• SAE-AMS7320 – Rings, Sealing, Cast Leaded-Tin Bronze 80CU – 16SN – 5PB AS Cast (No S/S Document)
• SAE-AMS7322 – Rings, Sealing. Cast Tin Bronze 80CU – 19SN AS Cast  (No S/S Document)
• SAE-AMS7379 – Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40 Degrees F (-40 Degrees C) For Elastomeric Seals in Aircraft Engine Oil, Fuel and Hydraulics Systems
• SAE-AMS7272 – Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Synthetic Lubricant Resistant 65 – 75
• SAE-AMS7273 – Rings, Sealing, Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 70 – 80
• SAE-AMS7274 – RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER, OIL RESISTANT 65 – 75
• SAE-AMS7276 – Rubber: Fluorocarbon (FKM)  High-Temperature-Fluid Resistant Low Compression Set for Seals in Fuel Systems and Specific Engine Oil Systems
• SAE-AMS7284 – RINGS, SEALING, PHOSPHONITRILIC FLUOROELASTOMER (FZ) AVIATION FUEL-RESISTANT (NO S/S DOCUMENT)
• SAE-AMS7270 – RINGS, SEALING, BUTADIENE-ACRYLONITRILE (NBR) RUBBER FUEL RESISTANT 65 – 75
• SAE-AMS7271 – Rubber: Acrylonitrile-Butadiene Rubber (NBR) Fuel and Low Temperature Resistant 60 – 70 Type “A” Hardness For Seals in Fuel Systems
• SAE-AMS7267 – Rings, Sealing, Silicone (VSI) Rubber Heat-Resistant, Low Compression Set 70 – 80
• SAE-AMS7268 – Rings, Sealing, Silicone Rubber Low Compression Set, Non-Oil Resistant 65-75
• SAE-AMS7269 – Rings, Sealing, Silicone (PVMQ) Rubber Low Outgassing, Space and Vacuum Service 45 – 55 (No S/S Document)
• SAE-AMS7261/3 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 85-95 (NO S/S DOCUMENT)
• SAE-AMS7262 – RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT 58 – 95 (NO S/S DOCUMENT)
• SAE-AMS7264 – Rings, Sealing, Silicone Rubber High Temperature Resistant, Low Compression Set 65 – 75 (No S/S Document)
• SAE-AMS7265 – RINGS, SEALING, ETHYLENE PROPYLENE (EPM) RUBBER PHOSPHATE ESTER HYDRAULIC FLUID RESISTANT 75 – 85 (NO S/S DOCUMENT)
• SAE-AMS7266 – Rings, Sealing, Fluorosilicone Rubber General Purpose, High Temperature, Fuel and Oil Resistant 65 – 75 (No S/S Document)
• SAE-AMS7259 – Fluorocarbon (FKM) Rubber High Temperature/Fluid Resistant Low Compression Set/ 85 to 95 Hardness For Seals In Fuel Systems and Specific Engine Oil Systems
• SAE-AMS7260 – Rings, Butadiene-Acrylonitrile (NBR) Rubber, Molded Fuel and Low Temperature Resistant 70-80
• SAE-AMS7261 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT (NO S/S DOCUMENT)
• SAE-AMS7261/1 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 65-75 (NO S/S DOCUMENT)
• SAE-AMS7261/2 – RINGS, SEALING, PHOSPHONITRILIC (FZ) FLUOROELASTOMER HIGH-TEMPERATURE-FLUID RESISTANT 75-85 (NO S/S DOCUMENT)
• SAE-AMS7256 – Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 85 – 95 (No S/S Document)
• SAE-AMS7257 – RINGS, SEALING, PERFLUOROCARBON (FFKM) RUBBER HIGH TEMPERATURE FLUID RESISTANT 70 – 80
• SAE-AMS7258 – Rings, Sealing, Butadiene-Acrylonitrile (NBR) Rubber Fuel Resistant, Low Shrinkage 65 – 75
• SAE-AMS3382 – Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90  (No S/S Document)
• SAE-AMS7255 – Rings, Sealing, Tetrafluoroethylene/Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 – 80 (No S/S Document)
• SAE-AMS3338 – SILICONE (PVQM) RUBBER EXTREME-LOW-TEMPERATURE RESISTANT 75-85
• SAE-AMS3347 – RUBBER, SILICONE 1200 PSI (8.27 MPA) HIGH MODULUS 45-55
• SAE-AMS3348 – SILICONE (VQM) RUBBER 1150 PSI (7.93 MPA) TENSILE STRENGTH, HIGH RESILIENCY 25-35
• SAE-AMS3349 – SILICONE (VQM) RUBBER 1100 PSI (7.58 MPA) TENSILE STRENGTH, HIGH RESILIENCY 65-75
• SAE-AMS3357 – RUBBER, SILICONE (VQM) LUBRICATING OIL AND COMPRESSION SET RESISTANT 65-75
• SAE-AMS3331 – Fluorosilicone (FVMQ) Rubber Fuel and Oil Resistant 65-75 (No S/S Document)
• SAE-AMS3334 – SILICONE RUBBER EXTREME LOW-TEMPERATURE RESISTANT 35-45
• SAE-AMS3335 – Silicone Rubber Extreme Low-Temperature Resistant 45-55
• SAE-AMS3336 – SILICONE (PVMQ) RUBBER EXTREME-LOW-TEMPERATURE RESISTANT 55-65
• SAE-AMS3337 – SILICONE (PVQM) RUBBER EXTREME-LOW-TEMPERATURE RESISTANT 65-75
• SAE-AMS3327 – Fluorosilicone  (FVMQ) Rubber High Temperature Fuel and Oil Resistant  70-80  (No S/S Document)

12Next